Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt/PHY driver updates from Greg KH:
 "Here is the big USB and Thunderbolt and PHY driver updates for
  5.6-rc1.

  With the advent of USB4, "Thunderbolt" has really become USB4, so the
  renaming of the Kconfig option and starting to share subsystem code
  has begun, hence both subsystems coming in through the same tree here.

  PHY driver updates also touched USB drivers, so that is coming in
  through here as well.

  Major stuff included in here are:
   - USB 4 initial support added (i.e. Thunderbolt)
   - musb driver updates
   - USB gadget driver updates
   - PHY driver updates
   - USB PHY driver updates
   - lots of USB serial stuff fixed up
   - USB typec updates
   - USB-IP fixes
   - lots of other smaller USB driver updates

  All of these have been in linux-next for a while now (the usb-serial
  tree is already tested in linux-next on its own before merged into
  here), with no reported issues"

[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
  that causes configuration warnings    - Linus ]

* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  Doc: ABI: add usb charger uevent
  usb: phy: show USB charger type for user
  usb: cdns3: fix spelling mistake and rework grammar in text
  usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
  USB: serial: ir-usb: simplify endpoint check
  USB: serial: ir-usb: make set_termios synchronous
  USB: serial: ir-usb: fix IrLAP framing
  USB: serial: ir-usb: fix link-speed handling
  USB: serial: ir-usb: add missing endpoint sanity check
  usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
  usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
  usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
  usb: typec: tcpci: mask event interrupts when remove driver
  usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
  usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
  usb: chipidea: handle single role for usb role class
  usb: musb: fix spelling mistake: "periperal" -> "peripheral"
  phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
  USB: usbfs: Always unlink URBs in reverse order
  ...

7 files changed, 61 insertions, 26 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f561c6c9e8a9..1d85c42b9c67 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1246,6 +1246,9 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
 		/* do nothing */
 		break;
 	}
+
+	/* de-assert DRVVBUS for HOST and OTG mode */
+	dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 }
 
 static void dwc3_get_properties(struct dwc3 *dwc)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1c8b349379af..77c4a9abe365 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -688,7 +688,9 @@ struct dwc3_ep {
 #define DWC3_EP_STALL		BIT(1)
 #define DWC3_EP_WEDGE		BIT(2)
 #define DWC3_EP_TRANSFER_STARTED BIT(3)
+#define DWC3_EP_END_TRANSFER_PENDING BIT(4)
 #define DWC3_EP_PENDING_REQUEST	BIT(5)
+#define DWC3_EP_DELAY_START	BIT(6)
 
 	/* This last one is specific to EP0 */
 #define DWC3_EP0_DIR_IN		BIT(31)
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index c1e9ea621f41..90bb022737da 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /**
- * dwc3-exynos.c - Samsung EXYNOS DWC3 Specific Glue layer
+ * dwc3-exynos.c - Samsung Exynos DWC3 Specific Glue layer
  *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -255,4 +255,4 @@ module_platform_driver(dwc3_exynos_driver);
 
 MODULE_AUTHOR("Anton Tikhomirov <av.tikhomirov@samsung.com>");
 MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("DesignWare USB3 EXYNOS Glue Layer");
+MODULE_DESCRIPTION("DesignWare USB3 Exynos Glue Layer");
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 294276f7deb9..7051611229c9 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -34,6 +34,7 @@
 #define PCI_DEVICE_ID_INTEL_GLK			0x31aa
 #define PCI_DEVICE_ID_INTEL_CNPLP		0x9dee
 #define PCI_DEVICE_ID_INTEL_CNPH		0xa36e
+#define PCI_DEVICE_ID_INTEL_CNPV		0xa3b0
 #define PCI_DEVICE_ID_INTEL_ICLLP		0x34ee
 #define PCI_DEVICE_ID_INTEL_EHLLP		0x4b7e
 #define PCI_DEVICE_ID_INTEL_TGPLP		0xa0ee
@@ -342,6 +343,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPH),
 	  (kernel_ulong_t) &dwc3_pci_intel_properties, },
 
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPV),
+	  (kernel_ulong_t) &dwc3_pci_intel_properties, },
+
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICLLP),
 	  (kernel_ulong_t) &dwc3_pci_intel_properties, },
 
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index fd1b100d2927..6dee4dabc0a4 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -1136,8 +1136,10 @@ void dwc3_ep0_interrupt(struct dwc3 *dwc,
 	case DWC3_DEPEVT_EPCMDCMPLT:
 		cmd = DEPEVT_PARAMETER_CMD(event->parameters);
 
-		if (cmd == DWC3_DEPCMD_ENDTRANSFER)
+		if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
+			dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
 			dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+		}
 		break;
 	}
 }
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 154f3f3e8cff..1b8014ab0b25 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -57,7 +57,7 @@ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
 		return -EINVAL;
 	}
 
-	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	dwc3_gadget_dctl_write_safe(dwc, reg);
 
 	return 0;
 }
@@ -111,6 +111,9 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
 
+	/* set no action before sending new link state change */
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
 	/* set requested state */
 	reg |= DWC3_DCTL_ULSTCHNGREQ(state);
 	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
@@ -1447,6 +1450,12 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 	list_add_tail(&req->list, &dep->pending_list);
 	req->status = DWC3_REQUEST_STATUS_QUEUED;
 
+	/* Start the transfer only after the END_TRANSFER is completed */
+	if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) {
+		dep->flags |= DWC3_EP_DELAY_START;
+		return 0;
+	}
+
 	/*
 	 * NOTICE: Isochronous endpoints should NEVER be prestarted. We must
 	 * wait for a XferNotReady event so we will know what's the current
@@ -1828,7 +1837,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
 		dwc->pullups_connected = false;
 	}
 
-	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	dwc3_gadget_dctl_write_safe(dwc, reg);
 
 	do {
 		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
@@ -2625,8 +2634,14 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 		cmd = DEPEVT_PARAMETER_CMD(event->parameters);
 
 		if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
+			dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
 			dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
 			dwc3_gadget_ep_cleanup_cancelled_requests(dep);
+			if ((dep->flags & DWC3_EP_DELAY_START) &&
+			    !usb_endpoint_xfer_isoc(dep->endpoint.desc))
+				__dwc3_gadget_kick_transfer(dep);
+
+			dep->flags &= ~DWC3_EP_DELAY_START;
 		}
 		break;
 	case DWC3_DEPEVT_STREAMEVT:
@@ -2678,12 +2693,12 @@ static void dwc3_reset_gadget(struct dwc3 *dwc)
 static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
 	bool interrupt)
 {
-	struct dwc3 *dwc = dep->dwc;
 	struct dwc3_gadget_ep_cmd_params params;
 	u32 cmd;
 	int ret;
 
-	if (!(dep->flags & DWC3_EP_TRANSFER_STARTED))
+	if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) ||
+	    (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
 		return;
 
 	/*
@@ -2693,16 +2708,13 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
 	 * much trouble synchronizing between us and gadget driver.
 	 *
 	 * We have discussed this with the IP Provider and it was
-	 * suggested to giveback all requests here, but give HW some
-	 * extra time to synchronize with the interconnect. We're using
-	 * an arbitrary 100us delay for that.
+	 * suggested to giveback all requests here.
 	 *
 	 * Note also that a similar handling was tested by Synopsys
 	 * (thanks a lot Paul) and nothing bad has come out of it.
-	 * In short, what we're doing is:
-	 *
-	 * - Issue EndTransfer WITH CMDIOC bit set
-	 * - Wait 100us
+	 * In short, what we're doing is issuing EndTransfer with
+	 * CMDIOC bit set and delay kicking transfer until the
+	 * EndTransfer command had completed.
 	 *
 	 * As of IP version 3.10a of the DWC_usb3 IP, the controller
 	 * supports a mode to work around the above limitation. The
@@ -2711,8 +2723,7 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
 	 * by writing GUCTL2[14]. This polling is already done in the
 	 * dwc3_send_gadget_ep_cmd() function so if the mode is
 	 * enabled, the EndTransfer command will have completed upon
-	 * returning from this function and we don't need to delay for
-	 * 100us.
+	 * returning from this function.
 	 *
 	 * This mode is NOT available on the DWC_usb31 IP.
 	 */
@@ -2728,9 +2739,8 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
 
 	if (!interrupt)
 		dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
-
-	if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A)
-		udelay(100);
+	else
+		dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
 }
 
 static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
@@ -2759,12 +2769,12 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 {
 	int			reg;
 
+	dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RX_DET);
+
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg &= ~DWC3_DCTL_INITU1ENA;
-	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
-
 	reg &= ~DWC3_DCTL_INITU2ENA;
-	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	dwc3_gadget_dctl_write_safe(dwc, reg);
 
 	dwc3_disconnect_gadget(dwc);
 
@@ -2816,7 +2826,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg &= ~DWC3_DCTL_TSTCTRL_MASK;
-	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	dwc3_gadget_dctl_write_safe(dwc, reg);
 	dwc->test_mode = false;
 	dwc3_clear_stall_all_ep(dwc);
 
@@ -2920,11 +2930,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
 			reg |= DWC3_DCTL_NYET_THRES(dwc->lpm_nyet_threshold);
 
-		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+		dwc3_gadget_dctl_write_safe(dwc, reg);
 	} else {
 		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 		reg &= ~DWC3_DCTL_HIRD_THRES_MASK;
-		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+		dwc3_gadget_dctl_write_safe(dwc, reg);
 	}
 
 	dep = dwc->eps[0];
@@ -3033,7 +3043,7 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
 
 				reg &= ~u1u2;
 
-				dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+				dwc3_gadget_dctl_write_safe(dwc, reg);
 				break;
 			default:
 				/* do nothing */
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 5faf4d1249e0..fbc7d8013f0b 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -127,4 +127,18 @@ static inline void dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep)
 	dep->resource_index = DWC3_DEPCMD_GET_RSC_IDX(res_id);
 }
 
+/**
+ * dwc3_gadget_dctl_write_safe - write to DCTL safe from link state change
+ * @dwc: pointer to our context structure
+ * @value: value to write to DCTL
+ *
+ * Use this function when doing read-modify-write to DCTL. It will not
+ * send link state change request.
+ */
+static inline void dwc3_gadget_dctl_write_safe(struct dwc3 *dwc, u32 value)
+{
+	value &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
+	dwc3_writel(dwc->regs, DWC3_DCTL, value);
+}
+
 #endif /* __DRIVERS_USB_DWC3_GADGET_H */