diff options
| author | Ulf Hansson <ulf.hansson@linaro.org> | 2017-01-25 10:25:01 +0100 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2017-02-13 13:20:43 +0100 |
| commit | 2ed573b603f78289dd1435c94597aa25a97e2b76 (patch) | |
| tree | 5c4847836397b3e9fbbfd0b69e609f2528bf8c8b /drivers/mmc | |
| parent | a44efa4796249c6d4341935e90e9105d6e1a5f15 (diff) | |
mmc: core: Clarify usage of mmc_set_signal_voltage()
The mmc_set_signal_voltage() function is used for SD/SDIO when switching to
1.8V for UHS mode. To clarify this let's do the following changes.
- We are always providing MMC_SIGNAL_VOLTAGE_180 as the signal_voltage
parameter to the function. Then, let's just remove the parameter as it
serves no purpose.
- Rename the function to mmc_set_uhs_voltage().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/core/core.c | 4 | ||||
| -rw-r--r-- | drivers/mmc/core/core.h | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/sd.c | 3 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio.c | 3 |
4 files changed, 5 insertions, 7 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index bb819d49291e..82c1a02b9c2a 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1647,7 +1647,7 @@ int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) } -int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) +int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr) { struct mmc_command cmd = {}; int err = 0; @@ -1691,7 +1691,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) host->ios.clock = 0; mmc_set_ios(host); - if (__mmc_set_signal_voltage(host, signal_voltage)) { + if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) { /* * Voltages may not have been switched, but we've already * sent CMD11, so a power cycle is required anyway diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 8a95c82554be..aee23f54a7ed 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -48,7 +48,7 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz); void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode); void mmc_set_bus_width(struct mmc_host *host, unsigned int width); u32 mmc_select_voltage(struct mmc_host *host, u32 ocr); -int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr); +int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr); int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage); void mmc_set_timing(struct mmc_host *host, unsigned int timing); void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 8b4f13943712..89531b48ae84 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -788,8 +788,7 @@ try_again: */ if (!mmc_host_is_spi(host) && rocr && ((*rocr & 0x41000000) == 0x41000000)) { - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, - pocr); + err = mmc_set_uhs_voltage(host, pocr); if (err == -EAGAIN) { retries--; goto try_again; diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 261c88632c43..a64a8709ec72 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -642,8 +642,7 @@ try_again: * to make sure which speed mode should work. */ if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) { - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, - ocr_card); + err = mmc_set_uhs_voltage(host, ocr_card); if (err == -EAGAIN) { mmc_sdio_resend_if_cond(host, card); retries--; |