x86: Move scx200 to platform

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2 files changed, 0 insertions, 134 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 28c4f3f2e97d..f57eeea4bc16 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -101,9 +101,6 @@ obj-$(CONFIG_PARAVIRT_CLOCK)	+= pvclock.o
 
 obj-$(CONFIG_PCSPKR_PLATFORM)	+= pcspeaker.o
 
-obj-$(CONFIG_SCx200)		+= scx200.o
-scx200-y			+= scx200_32.o
-
 obj-$(CONFIG_OLPC)		+= olpc.o
 obj-$(CONFIG_OLPC_XO1)		+= olpc-xo1.o
 obj-$(CONFIG_OLPC_OPENFIRMWARE)	+= olpc_ofw.o
diff --git a/arch/x86/kernel/scx200_32.c b/arch/x86/kernel/scx200_32.c
deleted file mode 100644
index 7e004acbe526..000000000000
--- a/arch/x86/kernel/scx200_32.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- *  Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
- *
- *  National Semiconductor SCx200 support.
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/pci.h>
-
-#include <linux/scx200.h>
-#include <linux/scx200_gpio.h>
-
-/* Verify that the configuration block really is there */
-#define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base))
-
-#define NAME "scx200"
-
-MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
-MODULE_DESCRIPTION("NatSemi SCx200 Driver");
-MODULE_LICENSE("GPL");
-
-unsigned scx200_gpio_base = 0;
-unsigned long scx200_gpio_shadow[2];
-
-unsigned scx200_cb_base = 0;
-
-static struct pci_device_id scx200_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_XBUS)   },
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_XBUS)   },
-	{ },
-};
-MODULE_DEVICE_TABLE(pci,scx200_tbl);
-
-static int __devinit scx200_probe(struct pci_dev *, const struct pci_device_id *);
-
-static struct pci_driver scx200_pci_driver = {
-	.name = "scx200",
-	.id_table = scx200_tbl,
-	.probe = scx200_probe,
-};
-
-static DEFINE_MUTEX(scx200_gpio_config_lock);
-
-static void __devinit scx200_init_shadow(void)
-{
-	int bank;
-
-	/* read the current values driven on the GPIO signals */
-	for (bank = 0; bank < 2; ++bank)
-		scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank);
-}
-
-static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	unsigned base;
-
-	if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE ||
-	    pdev->device == PCI_DEVICE_ID_NS_SC1100_BRIDGE) {
-		base = pci_resource_start(pdev, 0);
-		printk(KERN_INFO NAME ": GPIO base 0x%x\n", base);
-
-		if (!request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO")) {
-			printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n");
-			return -EBUSY;
-		}
-
-		scx200_gpio_base = base;
-		scx200_init_shadow();
-
-	} else {
-		/* find the base of the Configuration Block */
-		if (scx200_cb_probe(SCx200_CB_BASE_FIXED)) {
-			scx200_cb_base = SCx200_CB_BASE_FIXED;
-		} else {
-			pci_read_config_dword(pdev, SCx200_CBA_SCRATCH, &base);
-			if (scx200_cb_probe(base)) {
-				scx200_cb_base = base;
-			} else {
-				printk(KERN_WARNING NAME ": Configuration Block not found\n");
-				return -ENODEV;
-			}
-		}
-		printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base);
-	}
-
-	return 0;
-}
-
-u32 scx200_gpio_configure(unsigned index, u32 mask, u32 bits)
-{
-	u32 config, new_config;
-
-	mutex_lock(&scx200_gpio_config_lock);
-
-	outl(index, scx200_gpio_base + 0x20);
-	config = inl(scx200_gpio_base + 0x24);
-
-	new_config = (config & mask) | bits;
-	outl(new_config, scx200_gpio_base + 0x24);
-
-	mutex_unlock(&scx200_gpio_config_lock);
-
-	return config;
-}
-
-static int __init scx200_init(void)
-{
-	printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n");
-
-	return pci_register_driver(&scx200_pci_driver);
-}
-
-static void __exit scx200_cleanup(void)
-{
-	pci_unregister_driver(&scx200_pci_driver);
-	release_region(scx200_gpio_base, SCx200_GPIO_SIZE);
-}
-
-module_init(scx200_init);
-module_exit(scx200_cleanup);
-
-EXPORT_SYMBOL(scx200_gpio_base);
-EXPORT_SYMBOL(scx200_gpio_shadow);
-EXPORT_SYMBOL(scx200_gpio_configure);
-EXPORT_SYMBOL(scx200_cb_base);