[POWERPC] Remove todc code from ARCH=powerpc

Apparently we've copied the todc drivers, for various RTCs used in
embedded machines from ARCH=ppc to ARCH=powerpc, despite the fact that
it's never used in the latter.  This patch removes it.

If we ever need these drivers (which we probably shouldn't now the RTC
class stuff is in), we can transfer them one by one from ARCH=ppc,
removing from the hideous abomination which is the todc
"infrastructure".

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

2 files changed, 0 insertions, 393 deletions

diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 91f052d8cce0..f15af0e82f1c 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_40x)		+= dcr.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
-obj-$(CONFIG_PPC_TODC)		+= todc.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
 
diff --git a/arch/powerpc/sysdev/todc.c b/arch/powerpc/sysdev/todc.c
deleted file mode 100644
index 0a65980efb50..000000000000
--- a/arch/powerpc/sysdev/todc.c
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818
- * Real Time Clocks/Timekeepers.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/bcd.h>
-#include <linux/mc146818rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-
-/*
- * Depending on the hardware on your board and your board design, the
- * RTC/NVRAM may be accessed either directly (like normal memory) or via
- * address/data registers.  If your board uses the direct method, set
- * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and
- * 'nvram_as1' NULL.  If your board uses address/data regs to access nvram,
- * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the
- * address of the upper byte (leave NULL if using mc146818), and set
- * 'nvram_data' to the address of the 8-bit data register.
- *
- * Note: Even though the documentation for the various RTC chips say that it
- * 	 take up to a second before it starts updating once the 'R' bit is
- * 	 cleared, they always seem to update even though we bang on it many
- * 	 times a second.  This is true, except for the Dallas Semi 1746/1747
- * 	 (possibly others).  Those chips seem to have a real problem whenever
- * 	 we set the 'R' bit before reading them, they basically stop counting.
- * 	 					--MAG
- */
-
-/*
- * 'todc_info' should be initialized in your *_setup.c file to
- * point to a fully initialized 'todc_info_t' structure.
- * This structure holds all the register offsets for your particular
- * TODC/RTC chip.
- * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you.
- */
-
-#ifdef	RTC_FREQ_SELECT
-#undef	RTC_FREQ_SELECT
-#define	RTC_FREQ_SELECT		control_b	/* Register A */
-#endif
-
-#ifdef	RTC_CONTROL
-#undef	RTC_CONTROL
-#define	RTC_CONTROL		control_a	/* Register B */
-#endif
-
-#ifdef	RTC_INTR_FLAGS
-#undef	RTC_INTR_FLAGS
-#define	RTC_INTR_FLAGS		watchdog	/* Register C */
-#endif
-
-#ifdef	RTC_VALID
-#undef	RTC_VALID
-#define	RTC_VALID		interrupts	/* Register D */
-#endif
-
-/* Access routines when RTC accessed directly (like normal memory) */
-u_char
-todc_direct_read_val(int addr)
-{
-	return readb((void __iomem *)(todc_info->nvram_data + addr));
-}
-
-void
-todc_direct_write_val(int addr, unsigned char val)
-{
-	writeb(val, (void __iomem *)(todc_info->nvram_data + addr));
-	return;
-}
-
-/* Access routines for accessing m48txx type chips via addr/data regs */
-u_char
-todc_m48txx_read_val(int addr)
-{
-	outb(addr, todc_info->nvram_as0);
-	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
-	return inb(todc_info->nvram_data);
-}
-
-void
-todc_m48txx_write_val(int addr, unsigned char val)
-{
-	outb(addr, todc_info->nvram_as0);
-	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
-	outb(val, todc_info->nvram_data);
-	return;
-}
-
-/* Access routines for accessing mc146818 type chips via addr/data regs */
-u_char
-todc_mc146818_read_val(int addr)
-{
-	outb_p(addr, todc_info->nvram_as0);
-	return inb_p(todc_info->nvram_data);
-}
-
-void
-todc_mc146818_write_val(int addr, unsigned char val)
-{
-	outb_p(addr, todc_info->nvram_as0);
-	outb_p(val, todc_info->nvram_data);
-}
-
-
-/*
- * Routines to make RTC chips with NVRAM buried behind an addr/data pair
- * have the NVRAM and clock regs appear at the same level.
- * The NVRAM will appear to start at addr 0 and the clock regs will appear
- * to start immediately after the NVRAM (actually, start at offset
- * todc_info->nvram_size).
- */
-static inline u_char
-todc_read_val(int addr)
-{
-	u_char	val;
-
-	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
-		if (addr < todc_info->nvram_size) { /* NVRAM */
-			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
-			val = ppc_md.rtc_read_val(todc_info->nvram_data_reg);
-		} else { /* Clock Reg */
-			addr -= todc_info->nvram_size;
-			val = ppc_md.rtc_read_val(addr);
-		}
-	} else
-		val = ppc_md.rtc_read_val(addr);
-
-	return val;
-}
-
-static inline void
-todc_write_val(int addr, u_char val)
-{
-	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
-		if (addr < todc_info->nvram_size) { /* NVRAM */
-			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
-			ppc_md.rtc_write_val(todc_info->nvram_data_reg, val);
-		} else { /* Clock Reg */
-			addr -= todc_info->nvram_size;
-			ppc_md.rtc_write_val(addr, val);
-		}
-	} else
-		ppc_md.rtc_write_val(addr, val);
-}
-
-/*
- * TODC routines
- *
- * There is some ugly stuff in that there are assumptions for the mc146818.
- *
- * Assumptions:
- *	- todc_info->control_a has the offset as mc146818 Register B reg
- *	- todc_info->control_b has the offset as mc146818 Register A reg
- *	- m48txx control reg's write enable or 'W' bit is same as
- *	  mc146818 Register B 'SET' bit (i.e., 0x80)
- *
- * These assumptions were made to make the code simpler.
- */
-long __init
-todc_time_init(void)
-{
-	u_char	cntl_b;
-
-	if (!ppc_md.rtc_read_val)
-		ppc_md.rtc_read_val = ppc_md.nvram_read_val;
-	if (!ppc_md.rtc_write_val)
-		ppc_md.rtc_write_val = ppc_md.nvram_write_val;
-
-	cntl_b = todc_read_val(todc_info->control_b);
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		if ((cntl_b & 0x70) != 0x20) {
-			printk(KERN_INFO "TODC real-time-clock was stopped."
-				"  Now starting...");
-			cntl_b &= ~0x70;
-			cntl_b |= 0x20;
-		}
-
-		todc_write_val(todc_info->control_b, cntl_b);
-	} else if (todc_info->rtc_type == TODC_TYPE_DS17285) {
-		u_char mode;
-
-		mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A);
-		/* Make sure countdown clear is not set */
-		mode &= ~0x40;
-		/* Enable oscillator, extended register set */
-		mode |= 0x30;
-		todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode);
-
-	} else if (todc_info->rtc_type == TODC_TYPE_DS1501) {
-		u_char	month;
-
-		todc_info->enable_read = TODC_DS1501_CNTL_B_TE;
-		todc_info->enable_write = TODC_DS1501_CNTL_B_TE;
-
-		month = todc_read_val(todc_info->month);
-
-		if ((month & 0x80) == 0x80) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-			month &= ~0x80;
-			todc_write_val(todc_info->month, month);
-		}
-
-		cntl_b &= ~TODC_DS1501_CNTL_B_TE;
-		todc_write_val(todc_info->control_b, cntl_b);
-	} else { /* must be a m48txx type */
-		u_char	cntl_a;
-
-		todc_info->enable_read = TODC_MK48TXX_CNTL_A_R;
-		todc_info->enable_write = TODC_MK48TXX_CNTL_A_W;
-
-		cntl_a = todc_read_val(todc_info->control_a);
-
-		/* Check & clear STOP bit in control B register */
-		if (cntl_b & TODC_MK48TXX_DAY_CB) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-
-			cntl_a |= todc_info->enable_write;
-			cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */
-
-			todc_write_val(todc_info->control_a, cntl_a);
-			todc_write_val(todc_info->control_b, cntl_b);
-		}
-
-		/* Make sure READ & WRITE bits are cleared. */
-		cntl_a &= ~(todc_info->enable_write | todc_info->enable_read);
-		todc_write_val(todc_info->control_a, cntl_a);
-	}
-
-	return 0;
-}
-
-/*
- * There is some ugly stuff in that there are assumptions that for a mc146818,
- * the todc_info->control_a has the offset of the mc146818 Register B reg and
- * that the register'ss 'SET' bit is the same as the m48txx's write enable
- * bit in the control register of the m48txx (i.e., 0x80).
- *
- * It was done to make the code look simpler.
- */
-void
-todc_get_rtc_time(struct rtc_time *tm)
-{
-	uint	year = 0, mon = 0, mday = 0, hour = 0, min = 0, sec = 0;
-	uint	limit, i;
-	u_char	save_control, uip = 0;
-	extern void GregorianDay(struct rtc_time *);
-
-	spin_lock(&rtc_lock);
-	save_control = todc_read_val(todc_info->control_a);
-
-	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
-		limit = 1;
-
-		switch (todc_info->rtc_type) {
-		case TODC_TYPE_DS1553:
-		case TODC_TYPE_DS1557:
-		case TODC_TYPE_DS1743:
-		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-		case TODC_TYPE_DS1747:
-		case TODC_TYPE_DS17285:
-			break;
-		default:
-			todc_write_val(todc_info->control_a,
-				(save_control | todc_info->enable_read));
-		}
-	} else
-		limit = 100000000;
-
-	for (i=0; i<limit; i++) {
-		if (todc_info->rtc_type == TODC_TYPE_MC146818)
-			uip = todc_read_val(todc_info->RTC_FREQ_SELECT);
-
-		sec = todc_read_val(todc_info->seconds) & 0x7f;
-		min = todc_read_val(todc_info->minutes) & 0x7f;
-		hour = todc_read_val(todc_info->hours) & 0x3f;
-		mday = todc_read_val(todc_info->day_of_month) & 0x3f;
-		mon = todc_read_val(todc_info->month) & 0x1f;
-		year = todc_read_val(todc_info->year) & 0xff;
-
-		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-			uip |= todc_read_val(todc_info->RTC_FREQ_SELECT);
-			if ((uip & RTC_UIP) == 0)
-				break;
-		}
-	}
-
-	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
-		switch (todc_info->rtc_type) {
-		case TODC_TYPE_DS1553:
-		case TODC_TYPE_DS1557:
-		case TODC_TYPE_DS1743:
-		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-		case TODC_TYPE_DS1747:
-		case TODC_TYPE_DS17285:
-			break;
-		default:
-			save_control &= ~(todc_info->enable_read);
-			todc_write_val(todc_info->control_a, save_control);
-		}
-	}
-	spin_unlock(&rtc_lock);
-
-	if ((todc_info->rtc_type != TODC_TYPE_MC146818)
-			|| ((save_control & RTC_DM_BINARY) == 0)
-			|| RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(mday);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
-	}
-
-	if ((year + 1900) < 1970) {
-		year += 100;
-	}
-
-	tm->tm_sec = sec;
-	tm->tm_min = min;
-	tm->tm_hour = hour;
-	tm->tm_mday = mday;
-	tm->tm_mon = mon;
-	tm->tm_year = year;
-
-	GregorianDay(tm);
-}
-
-int
-todc_set_rtc_time(struct rtc_time *tm)
-{
-	u_char save_control, save_freq_select = 0;
-
-	spin_lock(&rtc_lock);
-	save_control = todc_read_val(todc_info->control_a);
-
-	/* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */
-	todc_write_val(todc_info->control_a,
-		(save_control | todc_info->enable_write));
-	save_control &= ~(todc_info->enable_write); /* in case it was set */
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT);
-		todc_write_val(todc_info->RTC_FREQ_SELECT,
-			save_freq_select | RTC_DIV_RESET2);
-	}
-
-	if ((todc_info->rtc_type != TODC_TYPE_MC146818)
-			|| ((save_control & RTC_DM_BINARY) == 0)
-			|| RTC_ALWAYS_BCD) {
-		BIN_TO_BCD(tm->tm_sec);
-		BIN_TO_BCD(tm->tm_min);
-		BIN_TO_BCD(tm->tm_hour);
-		BIN_TO_BCD(tm->tm_mon);
-		BIN_TO_BCD(tm->tm_mday);
-		BIN_TO_BCD(tm->tm_year);
-	}
-
-	todc_write_val(todc_info->seconds, tm->tm_sec);
-	todc_write_val(todc_info->minutes, tm->tm_min);
-	todc_write_val(todc_info->hours, tm->tm_hour);
-	todc_write_val(todc_info->month, tm->tm_mon);
-	todc_write_val(todc_info->day_of_month, tm->tm_mday);
-	todc_write_val(todc_info->year, tm->tm_year);
-
-	todc_write_val(todc_info->control_a, save_control);
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818)
-		todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select);
-
-	spin_unlock(&rtc_lock);
-	return 0;
-}