diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-06-03 16:27:18 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-06-03 16:27:18 -0700 |
commit | cb8e59cc87201af93dfbb6c3dccc8fcad72a09c2 (patch) | |
tree | a334db9022f89654b777bbce8c4c6632e65b9031 /arch/arm64 | |
parent | 2e63f6ce7ed2c4ff83ba30ad9ccad422289a6c63 (diff) | |
parent | 065fcfd49763ec71ae345bb5c5a74f961031e70e (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
Diffstat (limited to 'arch/arm64')
-rw-r--r-- | arch/arm64/boot/dts/mediatek/mt8516.dtsi | 17 | ||||
-rw-r--r-- | arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 34 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 | ||||
-rw-r--r-- | arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 22 | ||||
-rw-r--r-- | arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 21 | ||||
-rw-r--r-- | arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 12 | ||||
-rw-r--r-- | arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 11 | ||||
-rw-r--r-- | arch/arm64/kernel/armv8_deprecated.c | 2 | ||||
-rw-r--r-- | arch/arm64/kernel/fpsimd.c | 3 |
9 files changed, 121 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi index 2f8adf042195..89af661e7f63 100644 --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi @@ -191,6 +191,11 @@ #clock-cells = <1>; }; + pericfg: pericfg@10003050 { + compatible = "mediatek,mt8516-pericfg", "syscon"; + reg = <0 0x10003050 0 0x1000>; + }; + apmixedsys: apmixedsys@10018000 { compatible = "mediatek,mt8516-apmixedsys", "syscon"; reg = <0 0x10018000 0 0x710>; @@ -401,6 +406,18 @@ status = "disabled"; }; + ethernet: ethernet@11180000 { + compatible = "mediatek,mt8516-eth"; + reg = <0 0x11180000 0 0x1000>; + mediatek,pericfg = <&pericfg>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_RG_ETH>, + <&topckgen CLK_TOP_66M_ETH>, + <&topckgen CLK_TOP_133M_ETH>; + clock-names = "core", "reg", "trans"; + status = "disabled"; + }; + rng: rng@1020c000 { compatible = "mediatek,mt8516-rng", "mediatek,mt7623-rng"; diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi index a31093d7142b..dfceffe6950a 100644 --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi @@ -9,6 +9,7 @@ / { aliases { serial0 = &uart0; + ethernet0 = ðernet; }; chosen { @@ -166,6 +167,24 @@ status = "okay"; }; +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins_default>; + phy-handle = <ð_phy>; + phy-mode = "rmii"; + mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + &usb0 { status = "okay"; dr_mode = "peripheral"; @@ -218,4 +237,19 @@ bias-pull-up; }; }; + + ethernet_pins_default: ethernet { + pins_ethernet { + pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>, + <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>, + <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>, + <MT8516_PIN_6_EINT6__FUNC_EXT_RXC>, + <MT8516_PIN_7_EINT7__FUNC_EXT_RXDV>, + <MT8516_PIN_8_EINT8__FUNC_EXT_RXD0>, + <MT8516_PIN_9_EINT9__FUNC_EXT_RXD1>, + <MT8516_PIN_12_EINT12__FUNC_EXT_TXEN>, + <MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO>, + <MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 8f926b5234d4..de6bb86c4968 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1761,6 +1761,8 @@ ipa: ipa@1e40000 { compatible = "qcom,sdm845-ipa"; + + iommus = <&apps_smmu 0x720 0x3>; reg = <0 0x1e40000 0 0x7000>, <0 0x1e47000 0 0x2000>, <0 0x1e04000 0 0x2c000>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 11887c72f23a..0d533d52fcda 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -570,6 +570,28 @@ <0x5>; /* RX_CHAN */ ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */ }; + + cpts@310d0000 { + compatible = "ti,am65-cpts"; + reg = <0x0 0x310d0000 0x0 0x400>; + reg-names = "cpts"; + clocks = <&main_cpts_mux>; + clock-names = "cpts"; + interrupts-extended = <&intr_main_navss 163 0>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + + main_cpts_mux: refclk-mux { + #clock-cells = <0>; + clocks = <&k3_clks 118 5>, <&k3_clks 118 11>, + <&k3_clks 118 6>, <&k3_clks 118 3>, + <&k3_clks 118 8>, <&k3_clks 118 14>, + <&k3_clks 120 3>, <&k3_clks 121 3>; + assigned-clocks = <&main_cpts_mux>; + assigned-clock-parents = <&k3_clks 118 5>; + }; + }; }; main_gpio0: main_gpio0@600000 { diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 353d1e2532a7..ae5f813d0cac 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -247,5 +247,26 @@ clock-names = "fck"; bus_freq = <1000000>; }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&mcu_cpsw_cpts_mux>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 570 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + + mcu_cpsw_cpts_mux: refclk-mux { + #clock-cells = <0>; + clocks = <&k3_clks 118 5>, <&k3_clks 118 11>, + <&k3_clks 118 6>, <&k3_clks 118 3>, + <&k3_clks 118 8>, <&k3_clks 118 14>, + <&k3_clks 120 3>, <&k3_clks 121 3>; + assigned-clocks = <&mcu_cpsw_cpts_mux>; + assigned-clock-parents = <&k3_clks 118 5>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 0b9d14b838a1..844a5b50cf09 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -254,6 +254,18 @@ <0x0c>; /* RX_UHCHAN */ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ }; + + cpts@310d0000 { + compatible = "ti,j721e-cpts"; + reg = <0x0 0x310d0000 0x0 0x400>; + reg-names = "cpts"; + clocks = <&k3_clks 201 1>; + clock-names = "cpts"; + interrupts-extended = <&main_navss_intr 201 0>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + }; }; main_pmx0: pinmux@11c000 { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 3d6064125b40..dc31bd0434cb 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -338,5 +338,16 @@ clock-names = "fck"; bus_freq = <1000000>; }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 18 2>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; }; }; diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c index c19aa81ddc8c..7364de008bab 100644 --- a/arch/arm64/kernel/armv8_deprecated.c +++ b/arch/arm64/kernel/armv8_deprecated.c @@ -203,7 +203,7 @@ static void __init register_insn_emulation(struct insn_emulation_ops *ops) } static int emulation_proc_handler(struct ctl_table *table, int write, - void __user *buffer, size_t *lenp, + void *buffer, size_t *lenp, loff_t *ppos) { int ret = 0; diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 94289d126993..35cb5e66c504 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -341,8 +341,7 @@ static unsigned int find_supported_vector_length(unsigned int vl) #ifdef CONFIG_SYSCTL static int sve_proc_do_default_vl(struct ctl_table *table, int write, - void __user *buffer, size_t *lenp, - loff_t *ppos) + void *buffer, size_t *lenp, loff_t *ppos) { int ret; int vl = sve_default_vl; |