Merge tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform removals from Arnd Bergmann:
 "There are a lot of platforms that have not seen any interesting code
  changes in the past five years or more.

  I made a list and asked around which ones are no longer in use, and
  received confirmation about six ARM platforms and the TI C6x
  architecture that have all reached the end of their life upstream,
  with no known users remaining:

   - efm32 - added in 2011, first Cortex-M, no notable changes after 2013

   - picoxcell - added in 2011, abandoned after 2012 acquisition

   - prima2 - added in 20111, no notable changes since 2015

   - tango - added in 2015, sporadic changes until 2017, but abandoned

   - u300 - added in 2009, no notable changes since 2013

   - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes

   - arch/c6x - added in 2011, but work stalled soon after that

  A number of other platforms on the original list turned out to still
  have users. In some cases there are out-of-tree patches and users that
  plan to contribute them in the future, in other cases the code is
  complete and works reliably"

Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/

* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: remove u300 platform
  ARM: remove tango platform
  ARM: remove zte zx platform
  ARM: remove sirf prima2/atlas platforms
  c6x: remove architecture
  MAINTAINERS: Remove deleted platform efm32
  ARM: drop efm32 platform
  ARM: Remove PicoXcell platform support
  ARM: dts: Remove PicoXcell platforms

6 files changed, 0 insertions, 924 deletions

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6eecdef538bd..ec3c0cb27d1e 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -317,12 +317,6 @@ config ARCH_XGENE
 	help
 	  This enables support for AppliedMicro X-Gene SOC Family
 
-config ARCH_ZX
-	bool "ZTE ZX SoC Family"
-	select PINCTRL
-	help
-	  This enables support for ZTE ZX SoC Family
-
 config ARCH_ZYNQMP
 	bool "Xilinx ZynqMP Family"
 	help
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 9b1170658d60..f1173cd93594 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -29,4 +29,3 @@ subdir-y += synaptics
 subdir-y += ti
 subdir-y += toshiba
 subdir-y += xilinx
-subdir-y += zte
diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile
deleted file mode 100644
index 126896144bda..000000000000
--- a/arch/arm64/boot/dts/zte/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb
-dtb-$(CONFIG_ARCH_ZX) += zx296718-pcbox.dtb
diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts
deleted file mode 100644
index cb2519ecd724..000000000000
--- a/arch/arm64/boot/dts/zte/zx296718-evb.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2016 ZTE Corporation.
- * Copyright 2016 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "zx296718.dtsi"
-
-/ {
-	model = "ZTE zx296718 evaluation board";
-	compatible = "zte,zx296718-evb", "zte,zx296718";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	sound-spdif0 {
-		compatible = "audio-graph-card";
-		dais = <&spdif0_port>;
-	};
-
-	sound-i2s0 {
-		compatible = "audio-graph-card";
-		dais = <&i2s0_port>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&amplifier_pins>;
-		pa-gpios = <&bgpio4 0 GPIO_ACTIVE_HIGH>;
-		widgets = "Line", "Line Out Jack";
-		routing = "Amplifier", "LINEOUTL",
-			  "Amplifier", "LINEOUTR",
-			  "Line Out Jack", "Amplifier";
-	};
-};
-
-&aud96p22 {
-	port {
-		aud96p22_endpoint: endpoint {
-			remote-endpoint = <&i2s0_endpoint>;
-		};
-	};
-};
-
-&emmc {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-
-	port {
-		hdmi_endpoint: endpoint {
-			remote-endpoint = <&spdif0_endpoint>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2s0 {
-	status = "okay";
-
-	i2s0_port: port {
-		i2s0_endpoint: endpoint {
-			remote-endpoint = <&aud96p22_endpoint>;
-			dai-format = "i2s";
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&pmm {
-	amplifier_pins: amplifier {
-		pins = "TSI3_DATA";
-		function = "BGPIO";
-	};
-};
-
-&sd1 {
-	status = "okay";
-};
-
-&spdif0 {
-	status = "okay";
-
-	spdif0_port: port {
-		spdif0_endpoint: endpoint {
-			remote-endpoint = <&hdmi_endpoint>;
-		};
-	};
-};
-
-&tvenc {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts b/arch/arm64/boot/dts/zte/zx296718-pcbox.dts
deleted file mode 100644
index e02509f7082b..000000000000
--- a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) 2017 Sanechips Technology Co., Ltd.
- * Copyright 2017 Linaro Ltd.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- */
-
-/dts-v1/;
-#include "zx296718.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "ZTE ZX296718 PCBOX Board";
-	compatible = "zte,zx296718-pcbox", "zte,zx296718";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	a53_vdd0v9: regulator-a53 {
-		compatible = "pwm-regulator";
-		pwms = <&pwm 3 1250 PWM_POLARITY_INVERTED>;
-		regulator-name = "A53_VDD0V9";
-		regulator-min-microvolt = <855000>;
-		regulator-max-microvolt = <1183000>;
-		pwm-dutycycle-unit = <100>;
-		pwm-dutycycle-range = <0 100>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	sound-spdif0 {
-		compatible = "audio-graph-card";
-		dais = <&spdif0_port>;
-	};
-
-	sound-i2s0 {
-		compatible = "audio-graph-card";
-		dais = <&i2s0_port>;
-	};
-};
-
-&aud96p22 {
-	port {
-		aud96p22_endpoint: endpoint {
-			remote-endpoint = <&i2s0_endpoint>;
-		};
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&a53_vdd0v9>;
-};
-
-&emmc {
-	status = "okay";
-};
-
-&hdmi {
-	status = "disabled";
-
-	port {
-		hdmi_endpoint: endpoint {
-			remote-endpoint = <&spdif0_endpoint>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2s0 {
-	status = "okay";
-
-	i2s0_port: port {
-		i2s0_endpoint: endpoint {
-			remote-endpoint = <&aud96p22_endpoint>;
-			dai-format = "i2s";
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&irdec {
-	status = "okay";
-};
-
-&pmm {
-	pwm3_pins: pwm3 {
-		pins = "KEY_ROW2";
-		function = "PWM";
-	};
-
-	vga_pins: vga {
-		pins = "KEY_COL1", "KEY_COL2", "VGA_HS", "VGA_VS";
-		function = "VGA";
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_pins>;
-	status = "okay";
-};
-
-&sd0 {
-	status = "okay";
-};
-
-&sd1 {
-	status = "okay";
-};
-
-&spdif0 {
-	status = "okay";
-
-	spdif0_port: port {
-		spdif0_endpoint: endpoint {
-			remote-endpoint = <&hdmi_endpoint>;
-		};
-	};
-};
-
-&tvenc {
-	status = "disabled";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&vga {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vga_pins>;
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
deleted file mode 100644
index cc54837ff4ba..000000000000
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ /dev/null
@@ -1,627 +0,0 @@
-/*
- * Copyright 2016 ZTE Corporation.
- * Copyright 2016 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/zx296718-clock.h>
-
-/ {
-	compatible = "zte,zx296718";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	aliases {
-		gpio0 = &bgpio0;
-		gpio1 = &bgpio1;
-		gpio2 = &bgpio2;
-		gpio3 = &bgpio3;
-		gpio4 = &bgpio4;
-		gpio5 = &bgpio5;
-		gpio6 = &bgpio6;
-		serial0 = &uart0;
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-				core2 {
-					cpu = <&cpu2>;
-				};
-				core3 {
-					cpu = <&cpu3>;
-				};
-			};
-		};
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			clocks = <&topcrm A53_GATE>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			clocks = <&topcrm A53_GATE>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			clocks = <&topcrm A53_GATE>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			clocks = <&topcrm A53_GATE>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-	};
-
-	cluster0_opp: opp-table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <866000>;
-			clock-latency-ns = <500000>;
-		};
-
-		opp-648000000 {
-			opp-hz = /bits/ 64 <648000000>;
-			opp-microvolt = <866000>;
-			clock-latency-ns = <500000>;
-		};
-
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <888000>;
-			clock-latency-ns = <500000>;
-		};
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <898000>;
-			clock-latency-ns = <500000>;
-		};
-
-		opp-1188000000 {
-			opp-hz = /bits/ 64 <1188000000>;
-			opp-microvolt = <1015000>;
-			clock-latency-ns = <500000>;
-		};
-	};
-
-	clk24k: clk-24k {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000>;
-		clock-output-names = "rtcclk";
-	};
-
-	osc32k: clk-osc32k {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32000>;
-		clock-output-names = "osc32k";
-	};
-
-	osc12m: clk-osc12m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-		clock-output-names = "osc12m";
-	};
-
-	osc24m: clk-osc24m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc24m";
-	};
-
-	osc25m: clk-osc25m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-		clock-output-names = "osc25m";
-	};
-
-	osc60m: clk-osc60m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <60000000>;
-		clock-output-names = "osc60m";
-	};
-
-	osc99m: clk-osc99m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <99000000>;
-		clock-output-names = "osc99m";
-	};
-
-	osc125m: clk-osc125m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "osc125m";
-	};
-
-	osc198m: clk-osc198m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <198000000>;
-		clock-output-names = "osc198m";
-	};
-
-	pll_audio: clk-pll-884m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <884000000>;
-		clock-output-names = "pll_audio";
-	};
-
-	pll_ddr: clk-pll-932m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <932000000>;
-		clock-output-names = "pll_ddr";
-	};
-
-	pll_hsic: clk-pll-960m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <960000000>;
-		clock-output-names = "pll_hsic";
-	};
-
-	pll_mac: clk-pll-1000m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1000000000>;
-		clock-output-names = "pll_mac";
-	};
-
-	pll_mm0: clk-pll-1188m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1188000000>;
-		clock-output-names = "pll_mm0";
-	};
-
-	pll_mm1: clk-pll-1296m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1296000000>;
-		clock-output-names = "pll_mm1";
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	gic: interrupt-controller@2a00000 {
-		compatible = "arm,gic-v3";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x02a00000 0x10000>,
-		      <0x02b00000 0xc0000>;
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		irdec: ir-decoder@111000 {
-			compatible = "zte,zx296718-irdec";
-			reg = <0x111000 0x1000>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		aon_sysctrl: aon-sysctrl@116000 {
-			compatible = "zte,zx296718-aon-sysctrl", "syscon";
-			reg = <0x116000 0x1000>;
-		};
-
-		iocfg: pin-controller@119000 {
-			compatible = "zte,zx296718-iocfg";
-			reg = <0x119000 0x1000>;
-		};
-
-		uart0: uart@11f000 {
-			compatible = "arm,pl011", "arm,primecell";
-			arm,primecell-periphid = <0x001feffe>;
-			reg = <0x11f000 0x1000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc24m>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		sd0: mmc@1110000 {
-			compatible = "zte,zx296718-dw-mshc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x01110000 0x1000>;
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			fifo-depth = <32>;
-			data-addr = <0x200>;
-			fifo-watermark-aligned;
-			bus-width = <4>;
-			clock-frequency = <50000000>;
-			clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
-			clock-names = "biu", "ciu";
-			max-frequency = <50000000>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			sd-uhs-sdr50;
-			sd-uhs-sdr104;
-			sd-uhs-ddr50;
-			status = "disabled";
-		};
-
-		sd1: mmc@1111000 {
-			compatible = "zte,zx296718-dw-mshc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x01111000 0x1000>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			fifo-depth = <32>;
-			data-addr = <0x200>;
-			fifo-watermark-aligned;
-			bus-width = <4>;
-			clock-frequency = <167000000>;
-			clocks = <&topcrm SD1_AHB>, <&topcrm SD1_WCLK>;
-			clock-names = "biu", "ciu";
-			max-frequency = <167000000>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			status = "disabled";
-		};
-
-		dma: dma-controller@1460000 {
-			compatible = "zte,zx296702-dma";
-			reg = <0x01460000 0x1000>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc24m>;
-			clock-names = "dmaclk";
-			#dma-cells = <1>;
-			dma-channels = <32>;
-			dma-requests = <32>;
-		};
-
-		lsp0crm: clock-controller@1420000 {
-			compatible = "zte,zx296718-lsp0crm";
-			reg = <0x01420000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		bgpio0: gpio@142d000 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d000 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 48 16>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio1: gpio@142d040 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d040 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 80 16>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio2: gpio@142d080 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d080 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 80 3
-				       &pmm 3 32 4
-				       &pmm 7 83 9>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio3: gpio@142d0c0 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d0c0 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 92 16>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio4: gpio@142d100 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d100 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 108 12
-				       &pmm 12 121 4>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio5: gpio@142d140 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d140 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 125 16>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio6: gpio@142d180 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d180 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 141 2>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		lsp1crm: clock-controller@1430000 {
-			compatible = "zte,zx296718-lsp1crm";
-			reg = <0x01430000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		pwm: pwm@1439000 {
-			compatible = "zte,zx296718-pwm";
-			reg = <0x1439000 0x1000>;
-			clocks = <&lsp1crm LSP1_PWM_PCLK>,
-				 <&lsp1crm LSP1_PWM_WCLK>;
-			clock-names = "pclk", "wclk";
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		vou: vou@1440000 {
-			compatible = "zte,zx296718-vou";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x1440000 0x10000>;
-
-			dpc: dpc@0 {
-				compatible = "zte,zx296718-dpc";
-				reg = <0x0000 0x1000>, <0x1000 0x1000>,
-				      <0x5000 0x1000>, <0x6000 0x1000>,
-				      <0xa000 0x1000>;
-				reg-names = "osd", "timing_ctrl",
-					    "dtrc", "vou_ctrl",
-					    "otfppu";
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>,
-					 <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>;
-				clock-names = "aclk", "ppu_wclk",
-					      "main_wclk", "aux_wclk";
-			};
-
-			vga: vga@8000 {
-				compatible = "zte,zx296718-vga";
-				reg = <0x8000 0x1000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&topcrm VGA_I2C_WCLK>;
-				clock-names = "i2c_wclk";
-				zte,vga-power-control = <&sysctrl 0x170 0xe0>;
-				status = "disabled";
-			};
-
-			hdmi: hdmi@c000 {
-				compatible = "zte,zx296718-hdmi";
-				reg = <0xc000 0x4000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&topcrm HDMI_OSC_CEC>,
-					 <&topcrm HDMI_OSC_CLK>,
-					 <&topcrm HDMI_XCLK>;
-				clock-names = "osc_cec", "osc_clk", "xclk";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			tvenc: tvenc@2000 {
-				compatible = "zte,zx296718-tvenc";
-				reg = <0x2000 0x1000>;
-				zte,tvenc-power-control = <&sysctrl 0x170 0x10>;
-				status = "disabled";
-			};
-		};
-
-		topcrm: clock-controller@1461000 {
-			compatible = "zte,zx296718-topcrm";
-			reg = <0x01461000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		pmm: pin-controller@1462000 {
-			compatible = "zte,zx296718-pmm";
-			reg = <0x1462000 0x1000>;
-			zte,auxiliary-controller = <&iocfg>;
-		};
-
-		sysctrl: sysctrl@1463000 {
-			compatible = "zte,zx296718-sysctrl", "syscon";
-			reg = <0x1463000 0x1000>;
-		};
-
-		emmc: mmc@1470000{
-			compatible = "zte,zx296718-dw-mshc";
-			reg = <0x01470000 0x1000>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			zte,aon-syscon = <&aon_sysctrl>;
-			bus-width = <8>;
-			fifo-depth = <128>;
-			data-addr = <0x200>;
-			fifo-watermark-aligned;
-			clock-frequency = <167000000>;
-			clocks = <&topcrm EMMC_NAND_AHB>, <&topcrm EMMC_WCLK>;
-			clock-names = "biu", "ciu";
-			max-frequency = <167000000>;
-			cap-mmc-highspeed;
-			mmc-ddr-1_8v;
-			mmc-hs200-1_8v;
-			non-removable;
-			disable-wp;
-			status = "disabled";
-		};
-
-		audiocrm: clock-controller@1480000 {
-			compatible = "zte,zx296718-audiocrm";
-			reg = <0x01480000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		i2s0: i2s@1482000 {
-			compatible = "zte,zx296718-i2s", "zte,zx296702-i2s";
-			reg = <0x01482000 0x1000>;
-			clocks = <&audiocrm AUDIO_I2S0_WCLK>,
-				 <&audiocrm AUDIO_I2S0_PCLK>;
-			clock-names = "wclk", "pclk";
-			assigned-clocks = <&audiocrm I2S0_WCLK_MUX>;
-			assigned-clock-parents = <&topcrm AUDIO_99M>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dma 22>, <&dma 23>;
-			dma-names = "tx", "rx";
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@1486000 {
-			compatible = "zte,zx296718-i2c";
-			reg = <0x01486000 0x1000>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&audiocrm AUDIO_I2C0_WCLK>;
-			clock-frequency = <1600000>;
-			status = "disabled";
-
-			aud96p22: codec@22 {
-				compatible = "zte,zx-aud96p22";
-				#sound-dai-cells = <0>;
-				reg = <0x22>;
-			};
-		};
-
-		spdif0: spdif@1488000 {
-			compatible = "zte,zx296702-spdif";
-			reg = <0x1488000 0x1000>;
-			clocks = <&audiocrm AUDIO_SPDIF0_WCLK>;
-			clock-names = "tx";
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			#sound-dai-cells = <0>;
-			dmas = <&dma 30>;
-			dma-names = "tx";
-			status = "disabled";
-		};
-	};
-};