Merge tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Biggest part is the addition of the rk3288 variant of the VMARC
SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes
with it as the underlying Dalang carrier board is shared by both
an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10).

Other than that rk3288 gets its ohci node added that only works
on the fixed rk3288w variant of the soc and some asorted fixes
and improvements for dt-binding-check.

* tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add PCIe for RockPI N10
  ARM: dts: rockchip: Add HDMI out for RockPI N8/N10
  ARM: dts: rockchip: Add USB for RockPI N8/N10
  ARM: dts: rockchip: Add usb host0 ohci node for rk3288
  ARM: dts: rockchip: Fix VBUS on rk3288-vyasa
  ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support
  ARM: dts: rockchip: Add VMARC RK3288 SOM initial support
  dt-bindings: arm: rockchip: Add Rock Pi N8 binding
  arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier
  arm64: dts: rk3399pro: vmarc-som: Move supply regulators into Carrier
  arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, properties
  ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOM
  ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac
  ARM: dts: rockchip: Add marvell BT irq config
  ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio

Link: https://lore.kernel.org/r/2472314.kD9Egx1jfM@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 170 insertions, 42 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
index a1783e7f769a..369de5dc0ebd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
@@ -8,11 +8,15 @@
 /dts-v1/;
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
-#include "rk3399pro-vmarc-som.dtsi"
 #include <arm/rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3399pro-vmarc-som.dtsi"
 
 / {
 	model = "Radxa ROCK Pi N10";
 	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
 		     "rockchip,rk3399pro";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 0a516334f15f..5d087be04af8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -12,30 +12,16 @@
 / {
 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
 
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	vcc12v_dcin: vcc12v-dcin-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys-regulator {
+	vcc3v3_pcie: vcc-pcie-regulator {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr>;
+		regulator-name = "vcc3v3_pcie";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
@@ -61,23 +47,20 @@
 
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
 	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
 	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
 };
 
 &i2c0 {
 	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <180>;
 	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <180>;
 	status = "okay";
 
 	rk809: pmic@20 {
@@ -171,7 +154,8 @@
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <900000>;
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
 				};
 			};
 
@@ -206,7 +190,8 @@
 				regulator-min-microvolt = <1850000>;
 				regulator-max-microvolt = <1850000>;
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1850000>;
 				};
 			};
 
@@ -297,11 +282,88 @@
 	};
 };
 
+&i2c1 {
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <140>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcca_1v8>;
-	sdmmc-supply = <&vccio_sd>;
 	gpio1830-supply = <&vccio_3v0>;
+	sdmmc-supply = <&vccio_sd>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcca_0v9>;	/* VCC_0V9_S0 */
+	vpcie1v8-supply = <&vcca_1v8>;	/* VCC_1V8_S0 */
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr: pcie-pwr {
+			rockchip,pins =	<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -317,17 +379,79 @@
 	status = "okay";
 };
 
-&tsadc {
+&sdmmc {
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	max-frequency = <150000000>;
+};
+
+&tcphy0 {
 	status = "okay";
+};
+
+&tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
 };
 
-&pinctrl {
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins =
-				<1 RK_PC2 0 &pcfg_pull_up>;
-		};
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vbus_typec>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
 	};
 };
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_oc>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_oc>;
+};