Merge tag 'for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Battery/charger driver changes:

   - collie_battery, generic-adc-battery, s3c-adc-battery: convert to
     GPIO descriptors (incl ARM board files)

   - misc cleanup and fixes

  Reset drivers:

   - new poweroff driver for force disabling a regulator

   - use printk format symbol resolver

   - ocelot: add support for Luton and Jaguar2"

* tag 'for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (31 commits)
  power: supply: Fix a typo in warning message
  Documentation: DT: binding documentation for regulator-poweroff
  power: reset: new driver regulator-poweroff
  power: supply: ab8500: Use dev_err_probe() for IIO channels
  power: supply: ab8500_fg: Request all IRQs as threaded
  power: supply: ab8500_charger: Oneshot threaded IRQs
  power: supply: ab8500: Convert to dev_pm_ops
  power: supply: ab8500: Use local helper
  power: supply: wm831x_power: remove unneeded break
  power: supply: bq24735: Drop unused include
  power: supply: bq24190_charger: Drop unused include
  power: supply: generic-adc-battery: Use GPIO descriptors
  power: supply: collie_battery: Convert to GPIO descriptors
  power: supply: bq24190_charger: fix reference leak
  power: supply: s3c-adc-battery: Convert to GPIO descriptors
  power: reset: Use printk format symbol resolver
  power: supply: axp20x_usb_power: Use power efficient workqueue for debounce
  power: supply: axp20x_usb_power: fix typo
  power: supply: max8997-charger: Improve getting charger status
  power: supply: max8997-charger: Fix platform data retrieval
  ...

2 files changed, 20 insertions, 3 deletions

diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
index 53d51aa83200..8a43ed1c4c4d 100644
--- a/arch/arm/mach-s3c/mach-h1940.c
+++ b/arch/arm/mach-s3c/mach-h1940.c
@@ -297,6 +297,15 @@ static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
 	{ .volt = 3841, .cur = 0, .level = 0},
 };
 
+static struct gpiod_lookup_table h1940_bat_gpio_table = {
+	.dev_id = "s3c-adc-battery",
+	.table = {
+		/* Charge status S3C2410_GPF(3) */
+		GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static int h1940_bat_init(void)
 {
 	int ret;
@@ -330,8 +339,6 @@ static struct s3c_adc_bat_pdata h1940_bat_cfg = {
 	.exit = h1940_bat_exit,
 	.enable_charger = h1940_enable_charger,
 	.disable_charger = h1940_disable_charger,
-	.gpio_charge_finished = S3C2410_GPF(3),
-	.gpio_inverted = 1,
 	.lut_noac = bat_lut_noac,
 	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
 	.lut_acin = bat_lut_acin,
@@ -720,6 +727,7 @@ static void __init h1940_init(void)
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
 	gpiod_add_lookup_table(&h1940_mmc_gpio_table);
 	gpiod_add_lookup_table(&h1940_audio_gpio_table);
+	gpiod_add_lookup_table(&h1940_bat_gpio_table);
 	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
 	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
 			      S3C_GPIO_PULL_NONE);
diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
index b9758f0a9a14..6e19add158a9 100644
--- a/arch/arm/mach-s3c/mach-rx1950.c
+++ b/arch/arm/mach-s3c/mach-rx1950.c
@@ -206,6 +206,15 @@ static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
 	{ .volt = 3820, .cur = 0, .level = 0},
 };
 
+static struct gpiod_lookup_table rx1950_bat_gpio_table = {
+	.dev_id = "s3c-adc-battery",
+	.table = {
+		/* Charge status S3C2410_GPF(3) */
+		GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static int rx1950_bat_init(void)
 {
 	int ret;
@@ -331,7 +340,6 @@ static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
 	.exit = rx1950_bat_exit,
 	.enable_charger = rx1950_enable_charger,
 	.disable_charger = rx1950_disable_charger,
-	.gpio_charge_finished = S3C2410_GPF(3),
 	.lut_noac = bat_lut_noac,
 	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
 	.lut_acin = bat_lut_acin,
@@ -840,6 +848,7 @@ static void __init rx1950_init_machine(void)
 
 	pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
 	gpiod_add_lookup_table(&rx1950_audio_gpio_table);
+	gpiod_add_lookup_table(&rx1950_bat_gpio_table);
 	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
 	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
 			      S3C_GPIO_PULL_NONE);