Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc Marvell Orion device-tree updates from Olof Johansson:
 "This contains a set of device-tree conversions for Marvell Orion
  platforms that were staged early but took a few tries to get the
  branch into a format where it was suitable for us to pick up.

  Given that most people working on these platforms are hobbyists with
  limited time, we were a bit more flexible with merging it even though
  it came in late."

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
  ARM: Kirkwood: Describe Dreamplug LEDs in DT.
  ARM: Kirkwood: Describe iConnects LEDs in DT.
  ARM: Kirkwood: Describe iConnects temperature sensor in DT.
  ARM: Kirkwood: Describe IB62x0 LEDs in DT.
  ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
  ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
  ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
  ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
  ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
  ARM: Kirkwood: Use DT to configure SATA device.
  ARM: kirkwood: use devicetree for SPI on dreamplug
  ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
  ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
  ARM: Kirkwood: Add basic device tree support for QNAP TS219.
  ATA: sata_mv: Add device tree support
  ARM: Orion: DTify the watchdog timer.
  ARM: Orion: Add arch support needed for I2C via DT.
  ARM: kirkwood: use devicetree for orion-spi
  ...

Conflicts:
	drivers/watchdog/orion_wdt.c

14 files changed, 672 insertions, 71 deletions

diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index 9a33077130e8..5bb0bf39d3b8 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
+/include/ "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-320 NAS (Rev A1)";
@@ -15,6 +15,31 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
+	gpio-leds {
+		compatible = "gpio-leds";
+		blue-power {
+			label = "dns320:blue:power";
+			gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
+			linux,default-trigger = "default-on";
+		};
+		blue-usb {
+			label = "dns320:blue:usb";
+			gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+		};
+		orange-l_hdd {
+			label = "dns320:orange:l_hdd";
+			gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
+		};
+		orange-r_hdd {
+			label = "dns320:orange:r_hdd";
+			gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+		};
+		orange-usb {
+			label = "dns320:orange:usb";
+			gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */
+		};
+	};
+
 	ocp@f1000000 {
 		serial@12000 {
 			clock-frequency = <166666667>;
@@ -25,40 +50,5 @@
 			clock-frequency = <166666667>;
 			status = "okay";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
-			};
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index 16734c1b5dfe..d430713ea9b9 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
+/include/ "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-325 NAS (Rev A1)";
@@ -15,45 +15,43 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
-	ocp@f1000000 {
-		serial@12000 {
-			clock-frequency = <200000000>;
-			status = "okay";
+	gpio-leds {
+		compatible = "gpio-leds";
+		white-power {
+			label = "dns325:white:power";
+			gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
+			linux,default-trigger = "default-on";
+		};
+		white-usb {
+			label = "dns325:white:usb";
+			gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+		};
+		red-l_hdd {
+			label = "dns325:red:l_hdd";
+			gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
 		};
+		red-r_hdd {
+			label = "dns325:red:r_hdd";
+			gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+		};
+		red-usb {
+			label = "dns325:red:usb";
+			gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */
+		};
+	};
 
-		nand@3000000 {
+	ocp@f1000000 {
+		i2c@11000 {
 			status = "okay";
 
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
+			lm75: lm75@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
 			};
 		};
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
new file mode 100644
index 000000000000..7408655f91b5
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -0,0 +1,69 @@
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "D-Link DNS NASes (kirkwood-based)";
+	compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "Power button";
+			linux,code = <116>;
+			gpios = <&gpio1 2 1>;
+		};
+		button@2 {
+			label = "USB unmount button";
+			linux,code = <161>;
+			gpios = <&gpio1 15 1>;
+		};
+		button@3 {
+			label = "Reset button";
+			linux,code = <0x198>;
+			gpios = <&gpio1 16 1>;
+		};
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x500000>;
+			};
+
+			partition@600000 {
+				label = "ramdisk";
+				reg = <0x0600000 0x500000>;
+			};
+
+			partition@b00000 {
+				label = "image";
+				reg = <0x0b00000 0x6600000>;
+			};
+
+			partition@7100000 {
+				label = "mini firmware";
+				reg = <0x7100000 0xa00000>;
+			};
+
+			partition@7b00000 {
+				label = "config";
+				reg = <0x7b00000 0x500000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 78b0f06a09a2..26e281fbf6bc 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -20,5 +20,55 @@
 			clock-frequency = <200000000>;
 			status = "ok";
 		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l1606e";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@100000 {
+					reg = <0x100000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@180000 {
+					reg = <0x180000 0x10000>;
+					label = "dtb";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		bluetooth {
+			label = "dreamplug:blue:bluetooth";
+			gpios = <&gpio1 15 1>;
+		};
+		wifi {
+			label = "dreamplug:green:wifi";
+			gpios = <&gpio1 16 1>;
+		};
+		wifi-ap {
+			label = "dreamplug:green:wifi_ap";
+			gpios = <&gpio1 17 1>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
new file mode 100644
index 000000000000..7c8238fbb6f9
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate GoFlex Net";
+	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "pogoplug";
+				reg = <0x0500000 0x2000000>;
+			};
+
+			partition@2500000 {
+				label = "root";
+				reg = <0x02500000 0xd800000>;
+			};
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+		left0 {
+			label = "status:white:left0";
+			gpios = <&gpio1 10 0>;
+		};
+		left1 {
+			label = "status:white:left1";
+			gpios = <&gpio1 11 0>;
+		};
+		left2 {
+			label = "status:white:left2";
+			gpios = <&gpio1 12 0>;
+		};
+		left3 {
+			label = "status:white:left3";
+			gpios = <&gpio1 13 0>;
+		};
+		right0 {
+			label = "status:white:right0";
+			gpios = <&gpio1 6 0>;
+		};
+		right1 {
+			label = "status:white:right1";
+			gpios = <&gpio1 7 0>;
+		};
+		right2 {
+			label = "status:white:right2";
+			gpios = <&gpio1 8 0>;
+		};
+		right3 {
+			label = "status:white:right3";
+			gpios = <&gpio1 9 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index f59dcf6dc45f..66794ed75ff1 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -21,6 +21,11 @@
 			status = "okay";
 		};
 
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
 		nand@3000000 {
 			status = "okay";
 
@@ -41,4 +46,37 @@
 
 		};
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "USB Copy";
+			linux,code = <133>;
+			gpios = <&gpio0 29 1>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <0x198>;
+			gpios = <&gpio0 28 1>;
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green-os {
+			label = "ib62x0:green:os";
+			gpios = <&gpio0 25 0>;
+			linux,default-trigger = "default-on";
+		};
+		red-os {
+			label = "ib62x0:red:os";
+			gpios = <&gpio0 22 0>;
+		};
+		usb-copy {
+			label = "ib62x0:red:usb_copy";
+			gpios = <&gpio0 27 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 026a1f82d813..52d947045106 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -18,9 +18,51 @@
 	};
 
 	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
 		};
 	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-level {
+			label = "led_level";
+			gpios = <&gpio1 9 0>;
+			linux,default-trigger = "default-on";
+		};
+		power-blue {
+			label = "power:blue";
+			gpios = <&gpio1 11 0>;
+			linux,default-trigger = "timer";
+		};
+		usb1 {
+			label = "usb1:blue";
+			gpios = <&gpio1 12 0>;
+		};
+		usb2 {
+			label = "usb2:blue";
+			gpios = <&gpio1 13 0>;
+		};
+		usb3 {
+			label = "usb3:blue";
+			gpios = <&gpio1 14 0>;
+		};
+		usb4 {
+			label = "usb4:blue";
+			gpios = <&gpio1 15 0>;
+		};
+		otb {
+			label = "otb:blue";
+			gpios = <&gpio1 16 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts
new file mode 100644
index 000000000000..9510c9ea666c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts
@@ -0,0 +1,20 @@
+/dts-v1/;
+
+/include/ "kirkwood-lsxl.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-CHLv2";
+	compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <166666667>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts
new file mode 100644
index 000000000000..739019c4cba9
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts
@@ -0,0 +1,20 @@
+/dts-v1/;
+
+/include/ "kirkwood-lsxl.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-XHL";
+	compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
new file mode 100644
index 000000000000..8ac51c08269d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -0,0 +1,95 @@
+/include/ "kirkwood.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p40";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "Function Button";
+			linux,code = <132>;
+			gpios = <&gpio1 9 1>;
+		};
+		button@2 {
+			label = "Power-on Switch";
+			linux,code = <116>;
+			gpios = <&gpio1 10 1>;
+		};
+		button@3 {
+			label = "Power-auto Switch";
+			linux,code = <142>;
+			gpios = <&gpio1 11 1>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "lschlv2:blue:func";
+			gpios = <&gpio1 4 1>;
+		};
+
+		led@2 {
+			label = "lschlv2:red:alarm";
+			gpios = <&gpio1 5 1>;
+		};
+
+		led@3 {
+			label = "lschlv2:amber:info";
+			gpios = <&gpio1 6 1>;
+		};
+
+		led@4 {
+			label = "lschlv2:blue:power";
+			gpios = <&gpio1 7 1>;
+			linux,default-trigger = "default-on";
+		};
+
+		led@5 {
+			label = "lschlv2:red:func";
+			gpios = <&gpio1 16 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
new file mode 100644
index 000000000000..ccbf32757800
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -0,0 +1,21 @@
+/dts-v1/;
+
+/include/ "kirkwood-ts219.dtsi"
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "USB Copy";
+			linux,code = <133>;
+			gpios = <&gpio0 15 1>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <0x198>;
+			gpios = <&gpio0 16 1>;
+		};
+	};
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
new file mode 100644
index 000000000000..fbe9932161a1
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -0,0 +1,21 @@
+/dts-v1/;
+
+/include/ "kirkwood-ts219.dtsi"
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "USB Copy";
+			linux,code = <133>;
+			gpios = <&gpio1 11 1>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <0x198>;
+			gpios = <&gpio1 5 1>;
+		};
+	};
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
new file mode 100644
index 000000000000..64ea27cb3298
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -0,0 +1,78 @@
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "QNAP TS219 family";
+	compatible = "qnap,ts219", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			s35390a: s35390a@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
+		serial@12100 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p128";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0000000 {
+					reg = <0x00000000 0x00080000>;
+					label = "U-Boot";
+				};
+
+				partition@00200000 {
+					reg = <0x00200000 0x00200000>;
+					label = "Kernel";
+				};
+
+				partition@00400000 {
+					reg = <0x00400000 0x00900000>;
+					label = "RootFS1";
+				};
+				partition@00d00000 {
+					reg = <0x00d00000 0x00300000>;
+					label = "RootFS2";
+				};
+				partition@00040000 {
+					reg = <0x00080000 0x00040000>;
+					label = "U-Boot Config";
+				};
+				partition@000c0000 {
+					reg = <0x000c0000 0x00140000>;
+					label = "NAS Config";
+				};
+			};
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index f95dbc190ab6..cef9616f330a 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -2,6 +2,15 @@
 
 / {
 	compatible = "marvell,kirkwood";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc", "marvell,intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf1020204 0x04>,
+		      <0xf1020214 0x04>;
+	};
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
@@ -9,6 +18,24 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		gpio0: gpio@10100 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10100 0x40>;
+			ngpio = <32>;
+			interrupts = <35>, <36>, <37>, <38>;
+		};
+
+		gpio1: gpio@10140 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10140 0x40>;
+			ngpio = <18>;
+			interrupts = <39>, <40>, <41>;
+		};
+
 		serial@12000 {
 			compatible = "ns16550a";
 			reg = <0x12000 0x100>;
@@ -33,6 +60,29 @@
 			interrupts = <53>;
 		};
 
+		spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <23>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		wdt@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>;
+			status = "okay";
+		};
+
+		sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			status = "disabled";
+		};
+
 		nand@3000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -45,5 +95,15 @@
 			/* set partition map and/or chip-delay in board dts */
 			status = "disabled";
 		};
+
+		i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <29>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 	};
 };