Merge tag 'drm-misc-next-2020-03-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.7:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

Driver Changes:
 - fb-helper: Remove drm_fb_helper_{add,add_all,remove}_one_connector
 - fbdev: some cleanups and dead-code removal
 - Conversions to simple-encoder
 - zero-length array removal
 - Panel: panel-dpi support in panel-simple, Novatek NT35510, Elida
   KD35T133,

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309135439.dicfnbo4ikj4tkz7@gilmour

13 files changed, 548 insertions, 213 deletions

diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt
index 78222ced1874..7f55ad4a40c4 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timing.txt
+++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt
@@ -1,123 +1 @@
-display-timing bindings
-=======================
-
-display-timings node
---------------------
-
-required properties:
- - none
-
-optional properties:
- - native-mode: The native mode for the display, in case multiple modes are
-		provided. When omitted, assume the first node is the native.
-
-timing subnode
---------------
-
-required properties:
- - hactive, vactive: display resolution
- - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters
-   in pixels
-   vfront-porch, vback-porch, vsync-len: vertical display timing parameters in
-   lines
- - clock-frequency: display clock in Hz
-
-optional properties:
- - hsync-active: hsync pulse is active low/high/ignored
- - vsync-active: vsync pulse is active low/high/ignored
- - de-active: data-enable pulse is active low/high/ignored
- - pixelclk-active: with
-			- active high = drive pixel data on rising edge/
-					sample data on falling edge
-			- active low  = drive pixel data on falling edge/
-					sample data on rising edge
-			- ignored     = ignored
- - syncclk-active: with
-			- active high = drive sync on rising edge/
-					sample sync on falling edge of pixel
-					clock
-			- active low  = drive sync on falling edge/
-					sample sync on rising edge of pixel
-					clock
-			- omitted     = same configuration as pixelclk-active
- - interlaced (bool): boolean to enable interlaced mode
- - doublescan (bool): boolean to enable doublescan mode
- - doubleclk (bool): boolean to enable doubleclock mode
-
-All the optional properties that are not bool follow the following logic:
-    <1>: high active
-    <0>: low active
-    omitted: not used on hardware
-
-There are different ways of describing the capabilities of a display. The
-devicetree representation corresponds to the one commonly found in datasheets
-for displays. If a display supports multiple signal timings, the native-mode
-can be specified.
-
-The parameters are defined as:
-
-  +----------+-------------------------------------+----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vback_porch                 |          |       |
-  |          |        v                            |          |       |
-  +----------#######################################----------+-------+
-  |          #        ^                            #          |       |
-  |          #        |                            #          |       |
-  |  hback   #        |                            #  hfront  | hsync |
-  |   porch  #        |       hactive              #  porch   |  len  |
-  |<-------->#<-------+--------------------------->#<-------->|<----->|
-  |          #        |                            #          |       |
-  |          #        |vactive                     #          |       |
-  |          #        |                            #          |       |
-  |          #        v                            #          |       |
-  +----------#######################################----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vfront_porch                |          |       |
-  |          |        v                            |          |       |
-  +----------+-------------------------------------+----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vsync_len                   |          |       |
-  |          |        v                            |          |       |
-  +----------+-------------------------------------+----------+-------+
-
-Note: In addition to being used as subnode(s) of display-timings, the timing
-      subnode may also be used on its own. This is appropriate if only one mode
-      need be conveyed. In this case, the node should be named 'panel-timing'.
-
-
-Example:
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 1080p24 {
-			/* 1920x1080p24 */
-			clock-frequency = <52000000>;
-			hactive = <1920>;
-			vactive = <1080>;
-			hfront-porch = <25>;
-			hback-porch = <25>;
-			hsync-len = <25>;
-			vback-porch = <2>;
-			vfront-porch = <2>;
-			vsync-len = <2>;
-			hsync-active = <1>;
-		};
-	};
-
-Every required property also supports the use of ranges, so the commonly used
-datasheet description with minimum, typical and maximum values can be used.
-
-Example:
-
-	timing1: timing {
-		/* 1920x1080p24 */
-		clock-frequency = <148500000>;
-		hactive = <1920>;
-		vactive = <1080>;
-		hsync-len = <0 44 60>;
-		hfront-porch = <80 88 95>;
-		hback-porch = <100 148 160>;
-		vfront-porch = <0 4 6>;
-		vback-porch = <0 36 50>;
-		vsync-len = <0 5 6>;
-	};
+See display-timings.yaml in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
new file mode 100644
index 000000000000..c8c0c9cb0492
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: display timing bindings
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  A display panel may be able to handle several display timings,
+  with different resolutions.
+  The display-timings node makes it possible to specify the timing
+  and to specify the timing that is native for the display.
+
+properties:
+  $nodename:
+    const: display-timings
+
+  native-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The default display timing is the one specified as native-mode.
+      If no native-mode is specified then the first node is assumed the
+      native mode.
+
+patternProperties:
+  "^timing":
+    type: object
+    allOf:
+      - $ref: panel-timing.yaml#
+
+additionalProperties: false
+
+examples:
+  - |+
+
+    /*
+     * Example that specifies panel timing using minimum, typical,
+     * maximum values as commonly used in datasheet description.
+     * timing1 is the native-mode.
+     */
+    display-timings {
+        native-mode = <&timing1>;
+        timing0 {
+            /* 1920x1080p24 */
+            clock-frequency = <148500000>;
+            hactive = <1920>;
+            vactive = <1080>;
+            hsync-len = <0 44 60>;
+            hfront-porch = <80 88 95>;
+            hback-porch = <100 148 160>;
+            vfront-porch = <0 4 6>;
+            vback-porch = <0 36 50>;
+            vsync-len = <0 5 6>;
+        };
+        timing1 {
+            /* 1920x1080p24 */
+            clock-frequency = <52000000>;
+            hactive = <1920>;
+            vactive = <1080>;
+            hfront-porch = <25>;
+            hback-porch = <25>;
+            hsync-len = <0 25 25>;
+            vback-porch = <2>;
+            vfront-porch = <2>;
+            vsync-len = <2>;
+            hsync-active = <1>;
+            pixelclk-active = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
new file mode 100644
index 000000000000..4bd74eaa61be
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/elida,kd35t133.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elida KD35T133 3.5in 320x480 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: elida,kd35t133
+  reg: true
+  backlight: true
+  reset-gpios: true
+  iovcc-supply:
+     description: regulator that supplies the iovcc voltage
+  vdd-supply:
+     description: regulator that supplies the vdd voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi@ff450000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "elida,kd35t133";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vdd-supply = <&vcc3v3_lcd>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
new file mode 100644
index 000000000000..791fc9daa68b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35510.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35510-based display panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: hydis,hva40wv1
+      - const: novatek,nt35510
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the NT35510 panel driver. The compatible
+      string determines how the NT35510 panel driver shall be configured
+      to work with the indicated panel. The novatek,nt35510 compatible shall
+      always be provided as a fallback.
+  reg: true
+  reset-gpios: true
+  vdd-supply:
+     description: regulator that supplies the vdd voltage
+  vddi-supply:
+     description: regulator that supplies the vddi voltage
+  backlight: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi@a0351000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel {
+            compatible = "hydis,hva40wv1", "novatek,nt35510";
+            reg = <0>;
+            vdd-supply = <&ab8500_ldo_aux4_reg>;
+            vddi-supply = <&ab8500_ldo_aux6_reg>;
+            reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+            backlight = <&gpio_bl>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index ef8d8cdfcede..ed051ba12084 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -54,13 +54,20 @@ properties:
 
   # Display Timings
   panel-timing:
-    type: object
     description:
       Most display panels are restricted to a single resolution and
       require specific display timings. The panel-timing subnode expresses those
-      timings as specified in the timing subnode section of the display timing
-      bindings defined in
-      Documentation/devicetree/bindings/display/panel/display-timing.txt.
+      timings.
+    allOf:
+      - $ref: panel-timing.yaml#
+
+  display-timings:
+    description:
+      Some display panels supports several resolutions with different timing.
+      The display-timings bindings supports specifying several timings and
+      optional specify which is the native mode.
+    allOf:
+      - $ref: display-timings.yaml#
 
   # Connectivity
   port:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
deleted file mode 100644
index 6b203bc4d932..000000000000
--- a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Generic MIPI DPI Panel
-======================
-
-Required properties:
-- compatible: "panel-dpi"
-
-Optional properties:
-- label: a symbolic name for the panel
-- enable-gpios: panel enable gpio
-- reset-gpios: GPIO to control the RESET pin
-- vcc-supply: phandle of regulator that will be used to enable power to the display
-- backlight: phandle of the backlight device
-
-Required nodes:
-- "panel-timing" containing video timings
-  (Documentation/devicetree/bindings/display/panel/display-timing.txt)
-- Video port for DPI input
-
-Example
--------
-
-lcd0: display@0 {
-        compatible = "samsung,lte430wq-f0c", "panel-dpi";
-        label = "lcd";
-
-        backlight = <&backlight>;
-
-        port {
-            lcd_in: endpoint {
-                    remote-endpoint = <&dpi_out>;
-            };
-        };
-
-        panel-timing {
-                clock-frequency = <9200000>;
-                hactive = <480>;
-                vactive = <272>;
-                hfront-porch = <8>;
-                hback-porch = <4>;
-                hsync-len = <41>;
-                vback-porch = <2>;
-                vfront-porch = <4>;
-                vsync-len = <10>;
-
-                hsync-active = <0>;
-                vsync-active = <0>;
-                de-active = <1>;
-                pixelclk-active = <1>;
-        };
-};
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
new file mode 100644
index 000000000000..5275d350f8cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MIPI DPI Panel
+
+maintainers:
+  - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    description:
+      Shall contain a panel specific compatible and "panel-dpi"
+      in that order.
+    items:
+      - {}
+      - const: panel-dpi
+
+  data-mapping:
+    enum:
+      - rgb24
+      - rgb565
+      - bgr666
+    description: |
+      Describes the media format, how the display panel is connected
+      to the display interface.
+
+  backlight: true
+  enable-gpios: true
+  height-mm: true
+  label: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  reset-gpios: true
+  width-mm: true
+
+required:
+  - panel-timing
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    panel@0 {
+        compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+        label = "osddisplay";
+        power-supply = <&vcc_supply>;
+        data-mapping = "rgb565";
+        backlight = <&backlight>;
+
+        port {
+            lcd_in: endpoint {
+                remote-endpoint = <&dpi_out>;
+            };
+        };
+        panel-timing {
+            clock-frequency = <9200000>;
+            hactive = <800>;
+            vactive = <480>;
+            hfront-porch = <8>;
+            hback-porch = <4>;
+            hsync-len = <41>;
+            vback-porch = <2>;
+            vfront-porch = <4>;
+            vsync-len = <10>;
+
+            hsync-active = <0>;
+            vsync-active = <0>;
+            de-active = <1>;
+            pixelclk-active = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index e717018d34ae..393ffc6acbba 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -177,6 +177,8 @@ properties:
       - nec,nl4827hc19-05b
         # Netron-DY E231732 7.0" WSVGA TFT LCD panel
       - netron-dy,e231732
+        # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
+      - neweast,wjfh116008a
         # Newhaven Display International 480 x 272 TFT LCD panel
       - newhaven,nhd-4.3-480272ef-atxl
         # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
new file mode 100644
index 000000000000..bd558ad7891f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-timing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: panel timing bindings
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  There are different ways of describing the timing data of a panel. The
+  devicetree representation corresponds to the one commonly found in datasheets
+  for panels.
+
+  The parameters are defined as seen in the following illustration.
+
+  +----------+-------------------------------------+----------+-------+
+  |          |        ^                            |          |       |
+  |          |        |vback_porch                 |          |       |
+  |          |        v                            |          |       |
+  +----------#######################################----------+-------+
+  |          #        ^                            #          |       |
+  |          #        |                            #          |       |
+  |  hback   #        |                            #  hfront  | hsync |
+  |   porch  #        |       hactive              #  porch   |  len  |
+  |<-------->#<-------+--------------------------->#<-------->|<----->|
+  |          #        |                            #          |       |
+  |          #        |vactive                     #          |       |
+  |          #        |                            #          |       |
+  |          #        v                            #          |       |
+  +----------#######################################----------+-------+
+  |          |        ^                            |          |       |
+  |          |        |vfront_porch                |          |       |
+  |          |        v                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+  |          |        ^                            |          |       |
+  |          |        |vsync_len                   |          |       |
+  |          |        v                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+
+
+  The following is the panel timings shown with time on the x-axis.
+  This matches the timing diagrams often found in data sheets.
+
+              Active                 Front           Sync           Back
+              Region                 Porch                          Porch
+  <-----------------------><----------------><-------------><-------------->
+    //////////////////////|
+   ////////////////////// |
+  //////////////////////  |..................               ................
+                                             _______________
+
+  Timing can be specified either as a typical value or as a tuple
+  of min, typ, max values.
+
+properties:
+
+  clock-frequency:
+   description: Panel clock in Hz
+
+  hactive:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Horizontal panel resolution in pixels
+
+  vactive:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vertical panel resolution in pixels
+
+  hfront-porch:
+    description: Horizontal front porch panel timing
+    oneOf:
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - maxItems: 1
+          items:
+            description: typical number of pixels
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32-array
+        - minItems: 3
+          maxItems: 3
+          items:
+            description: min, typ, max number of pixels
+
+  hback-porch:
+    description: Horizontal back porch timing
+    oneOf:
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - maxItems: 1
+          items:
+            description: typical number of pixels
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32-array
+        - minItems: 3
+          maxItems: 3
+          items:
+            description: min, typ, max number of pixels
+
+  hsync-len:
+    description: Horizontal sync length panel timing
+    oneOf:
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - maxItems: 1
+          items:
+            description: typical number of pixels
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32-array
+        - minItems: 3
+          maxItems: 3
+          items:
+            description: min, typ, max number of pixels
+
+  vfront-porch:
+    description: Vertical front porch panel timing
+    oneOf:
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - maxItems: 1
+          items:
+            description: typical number of lines
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32-array
+        - minItems: 3
+          maxItems: 3
+          items:
+            description: min, typ, max number of lines
+
+  vback-porch:
+    description: Vertical back porch panel timing
+    oneOf:
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - maxItems: 1
+          items:
+            description: typical number of lines
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32-array
+        - minItems: 3
+          maxItems: 3
+          items:
+            description: min, typ, max number of lines
+
+  vsync-len:
+    description: Vertical sync length panel timing
+    oneOf:
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - maxItems: 1
+          items:
+            description: typical number of lines
+      - allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32-array
+        - minItems: 3
+          maxItems: 3
+          items:
+            description: min, typ, max number of lines
+
+  hsync-active:
+    description: |
+      Horizontal sync pulse.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    enum: [0, 1]
+
+  vsync-active:
+    description: |
+      Vertical sync pulse.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    enum: [0, 1]
+
+  de-active:
+    description: |
+      Data enable.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    enum: [0, 1]
+
+  pixelclk-active:
+    description: |
+      Data driving on rising or falling edge.
+      Use 0 to drive pixel data on falling edge and
+      sample data on rising edge.
+      Use 1 to drive pixel data on rising edge and
+      sample data on falling edge
+    enum: [0, 1]
+
+  syncclk-active:
+    description: |
+      Drive sync on rising or sample sync on falling edge.
+      If not specified then the setup is as specified by pixelclk-active.
+      Use 0 to drive sync on falling edge and
+      sample sync on rising edge of pixel clock.
+      Use 1 to drive sync on rising edge and
+      sample sync on falling edge of pixel clock
+    enum: [0, 1]
+
+  interlaced:
+    type: boolean
+    description: Enable interlaced mode
+
+  doublescan:
+    type: boolean
+    description: Enable double scan mode
+
+  doubleclk:
+    type: boolean
+    description: Enable double clock mode
+
+required:
+ - clock-frequency
+ - hactive
+ - vactive
+ - hfront-porch
+ - hback-porch
+ - hsync-len
+ - vfront-porch
+ - vback-porch
+ - vsync-len
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt
deleted file mode 100644
index 5707af89319d..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Rockchip DRM master device
-================================
-
-The Rockchip DRM master device is a virtual device needed to list all
-vop devices or other display interface nodes that comprise the
-graphics subsystem.
-
-Required properties:
-- compatible: Should be "rockchip,display-subsystem"
-- ports: Should contain a list of phandles pointing to display interface port
-  of vop devices. vop definitions as defined in
-  Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
-
-example:
-
-display-subsystem {
-	compatible = "rockchip,display-subsystem";
-	ports = <&vopl_out>, <&vopb_out>;
-};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
new file mode 100644
index 000000000000..ec8ae742d4da
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-drm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DRM master device
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The Rockchip DRM master device is a virtual device needed to list all
+  vop devices or other display interface nodes that comprise the
+  graphics subsystem.
+
+properties:
+  compatible:
+    const: rockchip,display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Should contain a list of phandles pointing to display interface port
+      of vop devices. vop definitions as defined in
+      Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "rockchip,display-subsystem";
+        ports = <&vopl_out>, <&vopb_out>;
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9a0cca2fd166..a2da166df1bc 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -425,6 +425,8 @@ patternProperties:
     description: Shenzhen Hugsun Technology Co. Ltd.
   "^hwacom,.*":
     description: HwaCom Systems Inc.
+  "^hydis,.*":
+    description: Hydis Technologies
   "^hyundai,.*":
     description: Hyundai Technology
   "^i2se,.*":
@@ -665,6 +667,8 @@ patternProperties:
     description: Netron DY
   "^netxeon,.*":
     description: Shenzhen Netxeon Technology CO., LTD
+  "^neweast,.*":
+    description: Guangdong Neweast Optoelectronics CO., LTD
   "^nexbox,.*":
     description: Nexbox
   "^nextthing,.*":
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index ccf5e8e34222..439656f55c5d 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -359,23 +359,6 @@ Contact: Sean Paul
 
 Level: Starter
 
-drm_fb_helper tasks
--------------------
-
-- drm_fb_helper_restore_fbdev_mode_unlocked() should call restore_fbdev_mode()
-  not the _force variant so it can bail out if there is a master. But first
-  these igt tests need to be fixed: kms_fbcon_fbt@psr and
-  kms_fbcon_fbt@psr-suspend.
-
-- The max connector argument for drm_fb_helper_init() isn't used anymore and
-  can be removed.
-
-- The helper doesn't keep an array of connectors anymore so these can be
-  removed: drm_fb_helper_single_add_all_connectors(),
-  drm_fb_helper_add_one_connector() and drm_fb_helper_remove_one_connector().
-
-Level: Intermediate
-
 connector register/unregister fixes
 -----------------------------------