Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq core updates from Thomas Gleixner:
 "A rather large update for the interrupt core code and the irq chip drivers:

   - Add a new bitmap matrix allocator and supporting changes, which is
     used to replace the x86 vector allocator which comes with separate
     pull request. This allows to replace the convoluted nested loop
     allocation function in x86 with a facility which supports the
     recently added property of managed interrupts proper and allows to
     switch to a best effort vector reservation scheme, which addresses
     problems with vector exhaustion.

   - A large update to the ARM GIC-V3-ITS driver adding support for
     range selectors.

   - New interrupt controllers:
       - Meson and Meson8 GPIO
       - BCM7271 L2
       - Socionext EXIU

     If you expected that this will stop at some point, I have to
     disappoint you. There are new ones posted already. Sigh!

   - STM32 interrupt controller support for new platforms.

   - A pile of fixes, cleanups and updates to the MIPS GIC driver

   - The usual small fixes, cleanups and updates all over the place.
     Most visible one is to move the irq chip drivers Kconfig switches
     into a separate Kconfig menu"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  genirq: Fix type of shifting literal 1 in __setup_irq()
  irqdomain: Drop pointless NULL check in virq_debug_show_one
  genirq/proc: Return proper error code when irq_set_affinity() fails
  irq/work: Use llist_for_each_entry_safe
  irqchip: mips-gic: Print warning if inherited GIC base is used
  irqchip/mips-gic: Add pr_fmt and reword pr_* messages
  irqchip/stm32: Move the wakeup on interrupt mask
  irqchip/stm32: Fix initial values
  irqchip/stm32: Add stm32h7 support
  dt-bindings/interrupt-controllers: Add compatible string for stm32h7
  irqchip/stm32: Add multi-bank management
  irqchip/stm32: Select GENERIC_IRQ_CHIP
  irqchip/exiu: Add support for Socionext Synquacer EXIU controller
  dt-bindings: Add description of Socionext EXIU interrupt controller
  irqchip/gic-v3-its: Fix VPE activate callback return value
  irqchip: mips-gic: Make IPI bitmaps static
  irqchip: mips-gic: Share register writes in gic_set_type()
  irqchip: mips-gic: Remove gic_vpes variable
  irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
  irqchip: mips-gic: Configure EIC when CPUs come online
  ...

8 files changed, 88 insertions, 2 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 38ed8787261b..b74e13312fdc 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1716,6 +1716,13 @@
 	irqaffinity=	[SMP] Set the default irq affinity mask
 			The argument is a cpu list, as described above.
 
+	irqchip.gicv2_force_probe=
+			[ARM, ARM64]
+			Format: <bool>
+			Force the kernel to look for the second 4kB page
+			of a GICv2 controller even if the memory range
+			exposed by the device tree is too small.
+
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
 			for it. Intended to get systems with badly broken
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index 66e8ce14d23d..304bf22bb83c 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -70,6 +70,7 @@ stable kernels.
 |                |                 |                 |                             |
 | Hisilicon      | Hip0{5,6,7}     | #161010101      | HISILICON_ERRATUM_161010101 |
 | Hisilicon      | Hip0{6,7}       | #161010701      | N/A                         |
+| Hisilicon      | Hip07           | #161600802      | HISILICON_ERRATUM_161600802 |
 |                |                 |                 |                             |
 | Qualcomm Tech. | Falkor v1       | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 | Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
new file mode 100644
index 000000000000..a83f9a5734ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -0,0 +1,36 @@
+Amlogic meson GPIO interrupt controller
+
+Meson SoCs contains an interrupt controller which is able to watch the SoC
+pads and generate an interrupt on edge or level. The controller is essentially
+a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
+or level and polarity. It does not expose all 256 mux inputs because the
+documentation shows that the upper part is not mapped to any pad. The actual
+number of interrupt exposed depends on the SoC.
+
+Required properties:
+
+- compatible : must have "amlogic,meson8-gpio-intc” and either
+   “amlogic,meson8-gpio-intc” for meson8 SoCs (S802) or
+   “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or
+   “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) or
+   “amlogic,meson-gxl-gpio-intc” for GXL SoCs (S905X, S912)
+- interrupt-parent : a phandle to the GIC the interrupts are routed to.
+   Usually this is provided at the root level of the device tree as it is
+   common to most of the SoC.
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+   interrupt source. The value must be 2.
+- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
+   are the hwirqs used on the parent interrupt controller.
+
+Example:
+
+gpio_interrupt: interrupt-controller@9880 {
+	compatible = "amlogic,meson-gxbb-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	reg = <0x0 0x9880 0x0 0x10>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 5eb108e180fa..0a57f2f4167d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -75,6 +75,10 @@ These nodes must have the following properties:
 - reg: Specifies the base physical address and size of the ITS
   registers.
 
+Optional:
+- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated
+  address and size of the pre-ITS window.
+
 The main GIC node must contain the appropriate #address-cells,
 #size-cells and ranges properties for the reg property of all ITS
 nodes.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
index 448273a30a11..36df06c5c567 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
@@ -2,7 +2,8 @@ Broadcom Generic Level 2 Interrupt Controller
 
 Required properties:
 
-- compatible: should be "brcm,l2-intc"
+- compatible: should be "brcm,l2-intc" for latched interrupt controllers
+              should be "brcm,bcm7271-l2-intc" for level interrupt controllers
 - reg: specifies the base physical address and size of the registers
 - interrupt-controller: identifies the node as an interrupt controller
 - #interrupt-cells: specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
index e3f052d8c11a..33c9a10fdc91 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
@@ -13,6 +13,9 @@ Required properties:
     - "renesas,irqc-r8a7793" (R-Car M2-N)
     - "renesas,irqc-r8a7794" (R-Car E2)
     - "renesas,intc-ex-r8a7795" (R-Car H3)
+    - "renesas,intc-ex-r8a7796" (R-Car M3-W)
+    - "renesas,intc-ex-r8a77970" (R-Car V3M)
+    - "renesas,intc-ex-r8a77995" (R-Car D3)
 - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
   interrupts.txt in this directory
 - clocks: Must contain a reference to the functional clock.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
new file mode 100644
index 000000000000..8b2faefe29ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
@@ -0,0 +1,32 @@
+Socionext SynQuacer External Interrupt Unit (EXIU)
+
+The Socionext Synquacer SoC has an external interrupt unit (EXIU)
+that forwards a block of 32 configurable input lines to 32 adjacent
+level-high type GICv3 SPIs.
+
+Required properties:
+
+- compatible           : Should be "socionext,synquacer-exiu".
+- reg                  : Specifies base physical address and size of the
+                         control registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells     : Specifies the number of cells needed to encode an
+                         interrupt source. The value must be 3.
+- interrupt-parent     : phandle of the GIC these interrupts are routed to.
+- socionext,spi-base   : The SPI number of the first SPI of the 32 adjacent
+                         ones the EXIU forwards its interrups to.
+
+Notes:
+
+- Only SPIs can use the EXIU as an interrupt parent.
+
+Example:
+
+	exiu: interrupt-controller@510c0000 {
+		compatible = "socionext,synquacer-exiu";
+		reg = <0x0 0x510c0000 0x0 0x20>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <3>;
+		socionext,spi-base = <112>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
index 6e7703d4ff5b..edf03f09244b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
@@ -2,7 +2,9 @@ STM32 External Interrupt Controller
 
 Required properties:
 
-- compatible: Should be "st,stm32-exti"
+- compatible: Should be:
+    "st,stm32-exti"
+    "st,stm32h7-exti"
 - reg: Specifies base physical address and size of the registers
 - interrupt-controller: Indentifies the node as an interrupt controller
 - #interrupt-cells: Specifies the number of cells to encode an interrupt