Merge v5.6 into drm-next

msm needed rc6, so I just went and merged release
(msm has been in drm-next outside of this tree)

Signed-off-by: Dave Airlie <airlied@redhat.com>

16 files changed, 81 insertions, 21 deletions

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 9120e59578dc..2c08c628febd 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -110,6 +110,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154        |
 +----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX GICv3  | #38539          | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX Core   | #27456          | CAVIUM_ERRATUM_27456        |
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX Core   | #30115          | CAVIUM_ERRATUM_30115        |
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
index 33c7842917f6..8b9a8f337f16 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -23,6 +23,8 @@ properties:
       - items:
         - const: allwinner,sun7i-a20-crypto
         - const: allwinner,sun4i-a10-crypto
+      - items:
+        - const: allwinner,sun8i-a33-crypto
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
index ef2ae729718f..921172f689b8 100644
--- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
@@ -5,6 +5,7 @@ Required properties:
     * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board
     * "cypress,midas-touchkey" - for the touchkey found on midas boards
     * "cypress,aries-touchkey" - for the touchkey found on aries boards
+    * "coreriver,tc360-touchkey" - for the Coreriver TouchCore 360 touchkey
 - reg: I2C address of the chip.
 - interrupts: interrupt to which the chip is connected (see interrupt
 	binding[0]).
diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt
index 250f8d8cdce4..c00fb0d22c7b 100644
--- a/Documentation/devicetree/bindings/net/fsl-fman.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -110,6 +110,13 @@ PROPERTIES
 		Usage: required
 		Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
 
+- fsl,erratum-a050385
+		Usage: optional
+		Value type: boolean
+		Definition: A boolean property. Indicates the presence of the
+		erratum A050385 which indicates that DMA transactions that are
+		split can result in a FMan lock.
+
 =============================================================================
 FMan MURAM Node
 
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index a2da166df1bc..70fbc45b2a3e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -205,6 +205,8 @@ patternProperties:
     description: Colorful GRP, Shenzhen Xueyushi Technology Ltd.
   "^compulab,.*":
     description: CompuLab Ltd.
+  "^coreriver,.*":
+    description: CORERIVER Semiconductor Co.,Ltd.
   "^corpro,.*":
     description: Chengdu Corpro Technology Co., Ltd.
   "^cortina,.*":
diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst
index 790a15089f1f..56e5833e8a07 100644
--- a/Documentation/driver-api/dmaengine/provider.rst
+++ b/Documentation/driver-api/dmaengine/provider.rst
@@ -266,11 +266,15 @@ to use.
   attached (via the dmaengine_desc_attach_metadata() helper to the descriptor.
 
   From the DMA driver the following is expected for this mode:
+
   - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM
+
     The data from the provided metadata buffer should be prepared for the DMA
     controller to be sent alongside of the payload data. Either by copying to a
     hardware descriptor, or highly coupled packet.
+
   - DMA_DEV_TO_MEM
+
     On transfer completion the DMA driver must copy the metadata to the client
     provided metadata buffer before notifying the client about the completion.
     After the transfer completion, DMA drivers must not touch the metadata
@@ -284,10 +288,14 @@ to use.
   and dmaengine_desc_set_metadata_len() is provided as helper functions.
 
   From the DMA driver the following is expected for this mode:
-  - get_metadata_ptr
+
+  - get_metadata_ptr()
+
     Should return a pointer for the metadata buffer, the maximum size of the
     metadata buffer and the currently used / valid (if any) bytes in the buffer.
-  - set_metadata_len
+
+  - set_metadata_len()
+
     It is called by the clients after it have placed the metadata to the buffer
     to let the DMA driver know the number of valid bytes provided.
 
diff --git a/Documentation/filesystems/porting.rst b/Documentation/filesystems/porting.rst
index f18506083ced..26c093969573 100644
--- a/Documentation/filesystems/porting.rst
+++ b/Documentation/filesystems/porting.rst
@@ -850,3 +850,11 @@ business doing so.
 d_alloc_pseudo() is internal-only; uses outside of alloc_file_pseudo() are
 very suspect (and won't work in modules).  Such uses are very likely to
 be misspelled d_alloc_anon().
+
+---
+
+**mandatory**
+
+[should've been added in 2016] stale comment in finish_open() nonwithstanding,
+failure exits in ->atomic_open() instances should *NOT* fput() the file,
+no matter what.  Everything is handled by the caller.
diff --git a/Documentation/filesystems/zonefs.txt b/Documentation/filesystems/zonefs.txt
index d54fa98ac158..78813c34ec47 100644
--- a/Documentation/filesystems/zonefs.txt
+++ b/Documentation/filesystems/zonefs.txt
@@ -258,11 +258,11 @@ conditions.
     |    option    | condition | size     read    write    read    write |
     +--------------+-----------+-----------------------------------------+
     |              | good      | fixed    yes     no       yes     yes   |
-    | remount-ro   | read-only | fixed    yes     no       yes     no    |
+    | remount-ro   | read-only | as is    yes     no       yes     no    |
     | (default)    | offline   |   0      no      no       no      no    |
     +--------------+-----------+-----------------------------------------+
     |              | good      | fixed    yes     no       yes     yes   |
-    | zone-ro      | read-only | fixed    yes     no       yes     no    |
+    | zone-ro      | read-only | as is    yes     no       yes     no    |
     |              | offline   |   0      no      no       no      no    |
     +--------------+-----------+-----------------------------------------+
     |              | good      |   0      no      no       yes     yes   |
@@ -270,7 +270,7 @@ conditions.
     |              | offline   |   0      no      no       no      no    |
     +--------------+-----------+-----------------------------------------+
     |              | good      | fixed    yes     yes      yes     yes   |
-    | repair       | read-only | fixed    yes     no       yes     no    |
+    | repair       | read-only | as is    yes     no       yes     no    |
     |              | offline   |   0      no      no       no      no    |
     +--------------+-----------+-----------------------------------------+
 
@@ -307,8 +307,16 @@ condition changes. The defined behaviors are as follow:
 * zone-offline
 * repair
 
-The I/O error actions defined for each behavior are detailed in the previous
-section.
+The run-time I/O error actions defined for each behavior are detailed in the
+previous section. Mount time I/O errors will cause the mount operation to fail.
+The handling of read-only zones also differs between mount-time and run-time.
+If a read-only zone is found at mount time, the zone is always treated in the
+same manner as offline zones, that is, all accesses are disabled and the zone
+file size set to 0. This is necessary as the write pointer of read-only zones
+is defined as invalib by the ZBC and ZAC standards, making it impossible to
+discover the amount of data that has been written to the zone. In the case of a
+read-only zone discovered at run-time, as indicated in the previous section.
+the size of the zone file is left unchanged from its last updated value.
 
 Zonefs User Space Tools
 =======================
diff --git a/Documentation/kbuild/kbuild.rst b/Documentation/kbuild/kbuild.rst
index f1e5dce86af7..510f38d7e78a 100644
--- a/Documentation/kbuild/kbuild.rst
+++ b/Documentation/kbuild/kbuild.rst
@@ -237,7 +237,7 @@ This is solely useful to speed up test compiles.
 KBUILD_EXTRA_SYMBOLS
 --------------------
 For modules that use symbols from other modules.
-See more details in modules.txt.
+See more details in modules.rst.
 
 ALLSOURCE_ARCHS
 ---------------
diff --git a/Documentation/kbuild/kconfig-macro-language.rst b/Documentation/kbuild/kconfig-macro-language.rst
index 35b3263b7e40..8b413ef9603d 100644
--- a/Documentation/kbuild/kconfig-macro-language.rst
+++ b/Documentation/kbuild/kconfig-macro-language.rst
@@ -44,7 +44,7 @@ intermediate::
             def_bool y
 
 Then, Kconfig moves onto the evaluation stage to resolve inter-symbol
-dependency as explained in kconfig-language.txt.
+dependency as explained in kconfig-language.rst.
 
 
 Variables
diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index 6bc126a14b3d..04d5c01a2e99 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -924,7 +924,7 @@ When kbuild executes, the following steps are followed (roughly):
 	$(KBUILD_AFLAGS_MODULE) is used to add arch-specific options that
 	are used for assembler.
 
-	From commandline AFLAGS_MODULE shall be used (see kbuild.txt).
+	From commandline AFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_CFLAGS_KERNEL
 	$(CC) options specific for built-in
@@ -937,7 +937,7 @@ When kbuild executes, the following steps are followed (roughly):
 
 	$(KBUILD_CFLAGS_MODULE) is used to add arch-specific options that
 	are used for $(CC).
-	From commandline CFLAGS_MODULE shall be used (see kbuild.txt).
+	From commandline CFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_LDFLAGS_MODULE
 	Options for $(LD) when linking modules
@@ -945,7 +945,7 @@ When kbuild executes, the following steps are followed (roughly):
 	$(KBUILD_LDFLAGS_MODULE) is used to add arch-specific options
 	used when linking modules. This is often a linker script.
 
-	From commandline LDFLAGS_MODULE shall be used (see kbuild.txt).
+	From commandline LDFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_LDS
 
diff --git a/Documentation/kbuild/modules.rst b/Documentation/kbuild/modules.rst
index 69fa48ee93d6..e0b45a257f21 100644
--- a/Documentation/kbuild/modules.rst
+++ b/Documentation/kbuild/modules.rst
@@ -470,9 +470,9 @@ build.
 
 	The syntax of the Module.symvers file is::
 
-	<CRC>       <Symbol>          <Namespace>  <Module>                         <Export Type>
+	<CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
 
-	0xe1cc2a05  usb_stor_suspend  USB_STORAGE  drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL
+	0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
 
 	The fields are separated by tabs and values may be empty (e.g.
 	if no namespace is defined for an exported symbol).
diff --git a/Documentation/networking/devlink/devlink-region.rst b/Documentation/networking/devlink/devlink-region.rst
index 1a7683e7acb2..8b46e8591fe0 100644
--- a/Documentation/networking/devlink/devlink-region.rst
+++ b/Documentation/networking/devlink/devlink-region.rst
@@ -40,9 +40,6 @@ example usage
     # Delete a snapshot using:
     $ devlink region del pci/0000:00:05.0/cr-space snapshot 1
 
-    # Trigger (request) a snapshot be taken:
-    $ devlink region trigger pci/0000:00:05.0/cr-space
-
     # Dump a snapshot:
     $ devlink region dump pci/0000:00:05.0/fw-health snapshot 1
     0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30
diff --git a/Documentation/networking/net_failover.rst b/Documentation/networking/net_failover.rst
index 06c97dcb57ca..e143ab79a960 100644
--- a/Documentation/networking/net_failover.rst
+++ b/Documentation/networking/net_failover.rst
@@ -8,9 +8,9 @@ Overview
 ========
 
 The net_failover driver provides an automated failover mechanism via APIs
-to create and destroy a failover master netdev and mananges a primary and
+to create and destroy a failover master netdev and manages a primary and
 standby slave netdevs that get registered via the generic failover
-infrastructrure.
+infrastructure.
 
 The failover netdev acts a master device and controls 2 slave devices. The
 original paravirtual interface is registered as 'standby' slave netdev and
@@ -29,7 +29,7 @@ virtio-net accelerated datapath: STANDBY mode
 =============================================
 
 net_failover enables hypervisor controlled accelerated datapath to virtio-net
-enabled VMs in a transparent manner with no/minimal guest userspace chanages.
+enabled VMs in a transparent manner with no/minimal guest userspace changes.
 
 To support this, the hypervisor needs to enable VIRTIO_NET_F_STANDBY
 feature on the virtio-net interface and assign the same MAC address to both
diff --git a/Documentation/networking/rds.txt b/Documentation/networking/rds.txt
index f2a0147c933d..eec61694e894 100644
--- a/Documentation/networking/rds.txt
+++ b/Documentation/networking/rds.txt
@@ -159,7 +159,7 @@ Socket Interface
 	set SO_RDS_TRANSPORT on a socket for which the transport has
 	been previously attached explicitly (by SO_RDS_TRANSPORT) or
 	implicitly (via bind(2)) will return an error of EOPNOTSUPP.
-	An attempt to set SO_RDS_TRANSPPORT to RDS_TRANS_NONE will
+	An attempt to set SO_RDS_TRANSPORT to RDS_TRANS_NONE will
 	always return EINVAL.
 
 RDMA for RDS
diff --git a/Documentation/virt/kvm/amd-memory-encryption.rst b/Documentation/virt/kvm/amd-memory-encryption.rst
index d18c97b4e140..c3129b9ba5cb 100644
--- a/Documentation/virt/kvm/amd-memory-encryption.rst
+++ b/Documentation/virt/kvm/amd-memory-encryption.rst
@@ -53,6 +53,29 @@ key management interface to perform common hypervisor activities such as
 encrypting bootstrap code, snapshot, migrating and debugging the guest. For more
 information, see the SEV Key Management spec [api-spec]_
 
+The main ioctl to access SEV is KVM_MEM_ENCRYPT_OP.  If the argument
+to KVM_MEM_ENCRYPT_OP is NULL, the ioctl returns 0 if SEV is enabled
+and ``ENOTTY` if it is disabled (on some older versions of Linux,
+the ioctl runs normally even with a NULL argument, and therefore will
+likely return ``EFAULT``).  If non-NULL, the argument to KVM_MEM_ENCRYPT_OP
+must be a struct kvm_sev_cmd::
+
+       struct kvm_sev_cmd {
+               __u32 id;
+               __u64 data;
+               __u32 error;
+               __u32 sev_fd;
+       };
+
+
+The ``id`` field contains the subcommand, and the ``data`` field points to
+another struct containing arguments specific to command.  The ``sev_fd``
+should point to a file descriptor that is opened on the ``/dev/sev``
+device, if needed (see individual commands).
+
+On output, ``error`` is zero on success, or an error code.  Error codes
+are defined in ``<linux/psp-dev.h>`.
+
 KVM implements the following commands to support common lifecycle events of SEV
 guests, such as launching, running, snapshotting, migrating and decommissioning.
 
@@ -90,6 +113,8 @@ Returns: 0 on success, -negative on error
 
 On success, the 'handle' field contains a new handle and on error, a negative value.
 
+KVM_SEV_LAUNCH_START requires the ``sev_fd`` field to be valid.
+
 For more details, see SEV spec Section 6.2.
 
 3. KVM_SEV_LAUNCH_UPDATE_DATA