Merge tag 'v4.12-rc4' into x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 files changed, 79 insertions, 53 deletions

diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index 6db22103e2dd..025cf8c9324a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -36,7 +36,7 @@ Optional properties:
                 control gpios
 
  - threshold:   allows setting the "click"-threshold in the range
-                from 20 to 80.
+                from 0 to 80.
 
  - gain:        allows setting the sensitivity in the range from 0 to
                 31. Note that lower values indicate higher
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
index 05485699d70e..9630ac0e4b56 100644
--- a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
@@ -16,6 +16,11 @@ Required properties:
 - reg:                  Base address of PMIC on Hi6220 SoC.
 - interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
 - pmic-gpios:           The GPIO used by PMIC IRQ.
+- #clock-cells:		From common clock binding; shall be set to 0
+
+Optional properties:
+- clock-output-names: From common clock binding to override the
+  default output clock name
 
 Example:
 	pmic: pmic@f8000000 {
@@ -24,4 +29,5 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		#clock-cells = <0>;
 	}
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
index e25436861867..9029b45b8a22 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
@@ -18,6 +18,8 @@ Optional properties:
   "ext_clock" (External clock provided to the card).
 - post-power-on-delay-ms : Delay in ms after powering the card and
 	de-asserting the reset-gpios (if any)
+- power-off-delay-us : Delay in us after asserting the reset-gpios (if any)
+	during power off of the card.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index a1e3693cca16..6f55bdd52f8a 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -15,6 +15,10 @@ Optional properties:
 - phy-reset-active-high : If present then the reset sequence using the GPIO
   specified in the "phy-reset-gpios" property is reversed (H=reset state,
   L=operation state).
+- phy-reset-post-delay : Post reset delay in milliseconds. If present then
+  a delay of phy-reset-post-delay milliseconds will be observed after the
+  phy-reset-gpios has been toggled. Can be omitted thus no delay is
+  observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
 - phy-supply : regulator that powers the Ethernet PHY.
 - phy-handle : phandle to the PHY device connected to this device.
 - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index 71a3c134af1b..f01d154090da 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -247,7 +247,6 @@ bias-bus-hold		- latch weakly
 bias-pull-up		- pull up the pin
 bias-pull-down		- pull down the pin
 bias-pull-pin-default	- use pin-default pull state
-bi-directional		- pin supports simultaneous input/output operations
 drive-push-pull		- drive actively high and low
 drive-open-drain	- drive with open drain
 drive-open-source	- drive with open source
@@ -260,7 +259,6 @@ input-debounce		- debounce mode with debound time X
 power-source		- select between different power supplies
 low-power-enable	- enable low power mode
 low-power-disable	- disable low power mode
-output-enable		- enable output on pin regardless of output value
 output-low		- set the pin to output mode with low level
 output-high		- set the pin to output mode with high level
 slew-rate		- set the slew rate
diff --git a/Documentation/input/devices/edt-ft5x06.rst b/Documentation/input/devices/edt-ft5x06.rst
index 2032f0b7a8fa..1ccc94b192b7 100644
--- a/Documentation/input/devices/edt-ft5x06.rst
+++ b/Documentation/input/devices/edt-ft5x06.rst
@@ -15,7 +15,7 @@ It has been tested with the following devices:
 The driver allows configuration of the touch screen via a set of sysfs files:
 
 /sys/class/input/eventX/device/device/threshold:
-    allows setting the "click"-threshold in the range from 20 to 80.
+    allows setting the "click"-threshold in the range from 0 to 80.
 
 /sys/class/input/eventX/device/device/gain:
     allows setting the sensitivity in the range from 0 to 31. Note that
diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst
index 5338673c88d9..773d2bfacc6c 100644
--- a/Documentation/sound/hd-audio/models.rst
+++ b/Documentation/sound/hd-audio/models.rst
@@ -16,6 +16,8 @@ ALC880
     6-jack in back, 2-jack in front
 6stack-digout
     6-jack with a SPDIF out
+6stack-automute
+    6-jack with headphone jack detection
 
 ALC260
 ======
@@ -62,6 +64,8 @@ lenovo-dock
     Enables docking station I/O for some Lenovos
 hp-gpio-led
     GPIO LED support on HP laptops
+hp-dock-gpio-mic1-led
+    HP dock with mic LED support
 dell-headset-multi
     Headset jack, which can also be used as mic-in
 dell-headset-dock
@@ -72,6 +76,12 @@ alc283-sense-combo
     Combo jack sensing on ALC283
 tpt440-dock
     Pin configs for Lenovo Thinkpad Dock support
+tpt440
+    Lenovo Thinkpad T440s setup
+tpt460
+    Lenovo Thinkpad T460/560 setup
+dual-codecs
+    Lenovo laptops with dual codecs
 
 ALC66x/67x/892
 ==============
@@ -97,6 +107,8 @@ inv-dmic
     Inverted internal mic workaround
 dell-headset-multi
     Headset jack, which can also be used as mic-in
+dual-codecs
+    Lenovo laptops with dual codecs
 
 ALC680
 ======
@@ -114,6 +126,8 @@ inv-dmic
     Inverted internal mic workaround
 no-primary-hp
     VAIO Z/VGC-LN51JGB workaround (for fixed speaker DAC)
+dual-codecs
+    ALC1220 dual codecs for Gaming mobos
 
 ALC861/660
 ==========
@@ -206,65 +220,47 @@ auto
 
 Conexant 5045
 =============
-laptop-hpsense
-    Laptop with HP sense (old model laptop)
-laptop-micsense
-    Laptop with Mic sense (old model fujitsu)
-laptop-hpmicsense
-    Laptop with HP and Mic senses
-benq
-    Benq R55E
-laptop-hp530
-    HP 530 laptop
-test
-    for testing/debugging purpose, almost all controls can be
-    adjusted.  Appearing only when compiled with $CONFIG_SND_DEBUG=y
+cap-mix-amp
+    Fix max input level on mixer widget
+toshiba-p105
+    Toshiba P105 quirk
+hp-530
+    HP 530 quirk
 
 Conexant 5047
 =============
-laptop
-    Basic Laptop config 
-laptop-hp
-    Laptop config for some HP models (subdevice 30A5)
-laptop-eapd
-    Laptop config with EAPD support
-test
-    for testing/debugging purpose, almost all controls can be
-    adjusted.  Appearing only when compiled with $CONFIG_SND_DEBUG=y
+cap-mix-amp
+    Fix max input level on mixer widget
 
 Conexant 5051
 =============
-laptop
-    Basic Laptop config (default)
-hp
-    HP Spartan laptop
-hp-dv6736
-    HP dv6736
-hp-f700
-    HP Compaq Presario F700
-ideapad
-    Lenovo IdeaPad laptop
-toshiba
-    Toshiba Satellite M300
+lenovo-x200
+    Lenovo X200 quirk
 
 Conexant 5066
 =============
-laptop
-    Basic Laptop config (default)
-hp-laptop
-    HP laptops, e g G60
-asus
-    Asus K52JU, Lenovo G560
-dell-laptop
-    Dell laptops
-dell-vostro
-    Dell Vostro
-olpc-xo-1_5
-    OLPC XO 1.5
-ideapad
-    Lenovo IdeaPad U150
+stereo-dmic
+    Workaround for inverted stereo digital mic
+gpio1
+    Enable GPIO1 pin
+headphone-mic-pin
+    Enable headphone mic NID 0x18 without detection
+tp410
+    Thinkpad T400 & co quirks
 thinkpad
-    Lenovo Thinkpad
+    Thinkpad mute/mic LED quirk
+lemote-a1004
+    Lemote A1004 quirk
+lemote-a1205
+    Lemote A1205 quirk
+olpc-xo
+    OLPC XO quirk
+mute-led-eapd
+    Mute LED control via EAPD
+hp-dock
+    HP dock support
+mute-led-gpio
+    Mute LED control via GPIO
 
 STAC9200
 ========
@@ -444,6 +440,8 @@ dell-eq
     Dell desktops/laptops
 alienware
     Alienware M17x
+asus-mobo
+    Pin configs for ASUS mobo with 5.1/SPDIF out
 auto
     BIOS setup (default)
 
@@ -477,6 +475,8 @@ hp-envy-ts-bass
     Pin fixup for HP Envy TS bass speaker (NID 0x10)
 hp-bnb13-eq
     Hardware equalizer setup for HP laptops
+hp-envy-ts-bass
+    HP Envy TS bass support
 auto
     BIOS setup (default)
 
@@ -496,10 +496,22 @@ auto
 
 Cirrus Logic CS4206/4207
 ========================
+mbp53
+    MacBook Pro 5,3
 mbp55
     MacBook Pro 5,5
 imac27
     IMac 27 Inch
+imac27_122
+    iMac 12,2
+apple
+    Generic Apple quirk
+mbp101
+    MacBookPro 10,1
+mbp81
+    MacBookPro 8,1
+mba42
+    MacBookAir 4,2
 auto
     BIOS setup (default)
 
@@ -509,6 +521,10 @@ mba6
     MacBook Air 6,1 and 6,2
 gpio0
     Enable GPIO 0 amp
+mbp11
+    MacBookPro 11,2
+macmini
+    MacMini 7,1
 auto
     BIOS setup (default)