[PATCH] I2O: Adaptec specific SG_IO access, firmware access through sysfs and 2400A workaround

Changes:
 - Provide SG_IO access to BLOCK and EXECUTIVE class on Adaptec
   controllers
 - Use PRIVATE messages in SCSI-OSM because on some controllers normal
   SCSI class commands like READ or READ CAPACITY cause errors
 - Use new DMA and SG list creation function
 - Added workaround to limit sectors per request for Adaptec 2400A
   controllers

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

8 files changed, 282 insertions, 116 deletions

diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig
index ce278e060aca..94b6d676c5cb 100644
--- a/drivers/message/i2o/Kconfig
+++ b/drivers/message/i2o/Kconfig
@@ -24,6 +24,24 @@ config I2O
 
 	  If unsure, say N.
 
+config I2O_EXT_ADAPTEC
+	bool "Enable Adaptec extensions"
+	depends on I2O
+	default y
+	---help---
+	  Say Y for support of raidutils for Adaptec I2O controllers. You also
+	  have to say Y to "I2O Configuration support", "I2O SCSI OSM" below
+	  and to "SCSI generic support" under "SCSI device configuration".
+
+config I2O_EXT_ADAPTEC_DMA64
+	bool "Enable 64-bit DMA"
+	depends on I2O_EXT_ADAPTEC && ( 64BIT || HIGHMEM64G )
+	default y
+	---help---
+	  Say Y for support of 64-bit DMA transfer mode on Adaptec I2O
+	  controllers.
+	  Note: You need at least firmware version 3709.
+
 config I2O_CONFIG
 	tristate "I2O Configuration support"
 	depends on PCI && I2O
diff --git a/drivers/message/i2o/i2o_block.h b/drivers/message/i2o/i2o_block.h
index 9e1a95fb0833..e45cc40ce384 100644
--- a/drivers/message/i2o/i2o_block.h
+++ b/drivers/message/i2o/i2o_block.h
@@ -56,6 +56,12 @@
 #define I2O_BLOCK_RETRY_TIME HZ/4
 #define I2O_BLOCK_MAX_OPEN_REQUESTS 50
 
+/* request queue sizes */
+#define I2O_BLOCK_REQ_MEMPOOL_SIZE		32
+
+#define KERNEL_SECTOR_SHIFT 9
+#define KERNEL_SECTOR_SIZE (1 << KERNEL_SECTOR_SHIFT)
+
 /* I2O Block OSM mempool struct */
 struct i2o_block_mempool {
 	kmem_cache_t	*slab;
diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c
index 849d90aad779..7636833b4623 100644
--- a/drivers/message/i2o/i2o_config.c
+++ b/drivers/message/i2o/i2o_config.c
@@ -515,6 +515,7 @@ static int i2o_cfg_evt_get(unsigned long arg, struct file *fp)
 	return 0;
 }
 
+#ifdef CONFIG_I2O_EXT_ADAPTEC
 #ifdef CONFIG_COMPAT
 static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long arg)
 {
@@ -964,6 +965,7 @@ static int i2o_cfg_passthru(unsigned long arg)
 	kfree(reply);
 	return rcode;
 }
+#endif
 
 /*
  * IOCTL Handler
@@ -1018,9 +1020,11 @@ static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd,
 		ret = i2o_cfg_evt_get(arg, fp);
 		break;
 
+#ifdef CONFIG_I2O_EXT_ADAPTEC
 	case I2OPASSTHRU:
 		ret = i2o_cfg_passthru(arg);
 		break;
+#endif
 
 	default:
 		osm_debug("unknown ioctl called!\n");
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index c3b0c29ac02d..fef53b509a61 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -55,6 +55,7 @@
 #include <linux/pci.h>
 #include <linux/blkdev.h>
 #include <linux/i2o.h>
+#include <linux/scatterlist.h>
 
 #include <asm/dma.h>
 #include <asm/system.h>
@@ -65,19 +66,23 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_request.h>
+#include <scsi/sg.h>
+#include <scsi/sg_request.h>
 
 #define OSM_NAME	"scsi-osm"
-#define OSM_VERSION	"$Rev$"
+#define OSM_VERSION	"1.282"
 #define OSM_DESCRIPTION	"I2O SCSI Peripheral OSM"
 
 static struct i2o_driver i2o_scsi_driver;
 
-static int i2o_scsi_max_id = 16;
-static int i2o_scsi_max_lun = 8;
+static unsigned int i2o_scsi_max_id = 16;
+static unsigned int i2o_scsi_max_lun = 255;
 
 struct i2o_scsi_host {
 	struct Scsi_Host *scsi_host;	/* pointer to the SCSI host */
 	struct i2o_controller *iop;	/* pointer to the I2O controller */
+	unsigned int lun;	/* lun's used for block devices */
 	struct i2o_device *channel[0];	/* channel->i2o_dev mapping table */
 };
 
@@ -100,12 +105,17 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c)
 	u8 type;
 	int i;
 	size_t size;
-	i2o_status_block *sb;
+	u16 body_size = 6;
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec)
+		body_size = 8;
+#endif
 
 	list_for_each_entry(i2o_dev, &c->devices, list)
 	    if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) {
 		if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1)
-		   && (type == 0x01))	/* SCSI bus */
+		    && (type == 0x01))	/* SCSI bus */
 			max_channel++;
 	}
 
@@ -127,20 +137,18 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c)
 	scsi_host->max_id = i2o_scsi_max_id;
 	scsi_host->max_lun = i2o_scsi_max_lun;
 	scsi_host->this_id = c->unit;
-
-	sb = c->status_block.virt;
-
-	scsi_host->sg_tablesize = (sb->inbound_frame_size -
-				   sizeof(struct i2o_message) / 4 - 6) / 2;
+	scsi_host->sg_tablesize = i2o_sg_tablesize(c, body_size);
 
 	i2o_shost = (struct i2o_scsi_host *)scsi_host->hostdata;
 	i2o_shost->scsi_host = scsi_host;
 	i2o_shost->iop = c;
+	i2o_shost->lun = 1;
 
 	i = 0;
 	list_for_each_entry(i2o_dev, &c->devices, list)
 	    if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) {
-		if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1))	/* only SCSI bus */
+		if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1)
+		    && (type == 0x01))	/* only SCSI bus */
 			i2o_shost->channel[i++] = i2o_dev;
 
 		if (i >= max_channel)
@@ -212,8 +220,8 @@ static int i2o_scsi_probe(struct device *dev)
 	struct Scsi_Host *scsi_host;
 	struct i2o_device *parent;
 	struct scsi_device *scsi_dev;
-	u32 id;
-	u64 lun;
+	u32 id = -1;
+	u64 lun = -1;
 	int channel = -1;
 	int i;
 
@@ -223,8 +231,56 @@ static int i2o_scsi_probe(struct device *dev)
 
 	scsi_host = i2o_shost->scsi_host;
 
-	if (i2o_parm_field_get(i2o_dev, 0, 3, &id, 4) < 0)
+	switch (i2o_dev->lct_data.class_id) {
+	case I2O_CLASS_RANDOM_BLOCK_STORAGE:
+	case I2O_CLASS_EXECUTIVE:
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+		if (c->adaptec) {
+			u8 type;
+			struct i2o_device *d = i2o_shost->channel[0];
+
+			if (i2o_parm_field_get(d, 0x0000, 0, &type, 1)
+			    && (type == 0x01))	/* SCSI bus */
+				if (i2o_parm_field_get(d, 0x0200, 4, &id, 4)) {
+					channel = 0;
+					if (i2o_dev->lct_data.class_id ==
+					    I2O_CLASS_RANDOM_BLOCK_STORAGE)
+						lun = i2o_shost->lun++;
+					else
+						lun = 0;
+				}
+		}
+#endif
+		break;
+
+	case I2O_CLASS_SCSI_PERIPHERAL:
+		if (i2o_parm_field_get(i2o_dev, 0x0000, 3, &id, 4) < 0)
+			return -EFAULT;
+
+		if (i2o_parm_field_get(i2o_dev, 0x0000, 4, &lun, 8) < 0)
+			return -EFAULT;
+
+		parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid);
+		if (!parent) {
+			osm_warn("can not find parent of device %03x\n",
+				 i2o_dev->lct_data.tid);
+			return -EFAULT;
+		}
+
+		for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++)
+			if (i2o_shost->channel[i] == parent)
+				channel = i;
+		break;
+
+	default:
+		return -EFAULT;
+	}
+
+	if (channel == -1) {
+		osm_warn("can not find channel of device %03x\n",
+			 i2o_dev->lct_data.tid);
 		return -EFAULT;
+	}
 
 	if (id >= scsi_host->max_id) {
 		osm_warn("SCSI device id (%d) >= max_id of I2O host (%d)", id,
@@ -232,31 +288,12 @@ static int i2o_scsi_probe(struct device *dev)
 		return -EFAULT;
 	}
 
-	if (i2o_parm_field_get(i2o_dev, 0, 4, &lun, 8) < 0)
-		return -EFAULT;
 	if (lun >= scsi_host->max_lun) {
 		osm_warn("SCSI device id (%d) >= max_lun of I2O host (%d)",
 			 (unsigned int)lun, scsi_host->max_lun);
 		return -EFAULT;
 	}
 
-	parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid);
-	if (!parent) {
-		osm_warn("can not find parent of device %03x\n",
-			 i2o_dev->lct_data.tid);
-		return -EFAULT;
-	}
-
-	for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++)
-		if (i2o_shost->channel[i] == parent)
-			channel = i;
-
-	if (channel == -1) {
-		osm_warn("can not find channel of device %03x\n",
-			 i2o_dev->lct_data.tid);
-		return -EFAULT;
-	}
-
 	scsi_dev =
 	    __scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev);
 
@@ -266,7 +303,8 @@ static int i2o_scsi_probe(struct device *dev)
 		return PTR_ERR(scsi_dev);
 	}
 
-	sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj, "scsi");
+	sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj,
+			  "scsi");
 
 	osm_info("device added (TID: %03x) channel: %d, id: %d, lun: %d\n",
 		 i2o_dev->lct_data.tid, channel, id, (unsigned int)lun);
@@ -542,9 +580,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 				 void (*done) (struct scsi_cmnd *))
 {
 	struct i2o_controller *c;
-	struct Scsi_Host *host;
 	struct i2o_device *i2o_dev;
-	struct device *dev;
 	int tid;
 	struct i2o_message __iomem *msg;
 	u32 m;
@@ -554,20 +590,16 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 	 * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME
 	 */
 	u32 scsi_flags = 0x20a00000;
-	u32 sg_flags;
+	u32 sgl_offset;
 	u32 __iomem *mptr;
-	u32 __iomem *lenptr;
-	u32 len;
-	int i;
+	u32 cmd = I2O_CMD_SCSI_EXEC << 24;
+	int rc = 0;
 
 	/*
 	 *      Do the incoming paperwork
 	 */
-
 	i2o_dev = SCpnt->device->hostdata;
-	host = SCpnt->device->host;
 	c = i2o_dev->iop;
-	dev = &c->pdev->dev;
 
 	SCpnt->scsi_done = done;
 
@@ -575,7 +607,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 		osm_warn("no I2O device in request\n");
 		SCpnt->result = DID_NO_CONNECT << 16;
 		done(SCpnt);
-		return 0;
+		goto exit;
 	}
 
 	tid = i2o_dev->lct_data.tid;
@@ -584,46 +616,85 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 	osm_debug("Real scsi messages.\n");
 
 	/*
-	 *      Obtain an I2O message. If there are none free then
-	 *      throw it back to the scsi layer
-	 */
-
-	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
-	if (m == I2O_QUEUE_EMPTY)
-		return SCSI_MLQUEUE_HOST_BUSY;
-
-	mptr = &msg->body[0];
-
-	/*
 	 *      Put together a scsi execscb message
 	 */
-
 	switch (SCpnt->sc_data_direction) {
 	case PCI_DMA_NONE:
 		/* DATA NO XFER */
-		sg_flags = 0x00000000;
+		sgl_offset = SGL_OFFSET_0;
 		break;
 
 	case PCI_DMA_TODEVICE:
 		/* DATA OUT (iop-->dev) */
 		scsi_flags |= 0x80000000;
-		sg_flags = 0x14000000;
+		sgl_offset = SGL_OFFSET_10;
 		break;
 
 	case PCI_DMA_FROMDEVICE:
 		/* DATA IN  (iop<--dev) */
 		scsi_flags |= 0x40000000;
-		sg_flags = 0x10000000;
+		sgl_offset = SGL_OFFSET_10;
 		break;
 
 	default:
 		/* Unknown - kill the command */
 		SCpnt->result = DID_NO_CONNECT << 16;
 		done(SCpnt);
-		return 0;
+		goto exit;
 	}
 
-	writel(I2O_CMD_SCSI_EXEC << 24 | HOST_TID << 12 | tid, &msg->u.head[1]);
+	/*
+	 *      Obtain an I2O message. If there are none free then
+	 *      throw it back to the scsi layer
+	 */
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY) {
+		rc = SCSI_MLQUEUE_HOST_BUSY;
+		goto exit;
+	}
+
+	mptr = &msg->body[0];
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec) {
+		u32 adpt_flags = 0;
+
+		if (SCpnt->sc_request && SCpnt->sc_request->upper_private_data) {
+			i2o_sg_io_hdr_t __user *usr_ptr =
+			    ((Sg_request *) (SCpnt->sc_request->
+					     upper_private_data))->header.
+			    usr_ptr;
+
+			if (usr_ptr)
+				get_user(adpt_flags, &usr_ptr->flags);
+		}
+
+		switch (i2o_dev->lct_data.class_id) {
+		case I2O_CLASS_EXECUTIVE:
+		case I2O_CLASS_RANDOM_BLOCK_STORAGE:
+			/* interpret flag has to be set for executive */
+			adpt_flags ^= I2O_DPT_SG_FLAG_INTERPRET;
+			break;
+
+		default:
+			break;
+		}
+
+		/*
+		 * for Adaptec controllers we use the PRIVATE command, because
+		 * the normal SCSI EXEC doesn't support all SCSI commands on
+		 * all controllers (for example READ CAPACITY).
+		 */
+		if (sgl_offset == SGL_OFFSET_10)
+			sgl_offset = SGL_OFFSET_12;
+		cmd = I2O_CMD_PRIVATE << 24;
+		writel(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC, mptr++);
+		writel(adpt_flags | tid, mptr++);
+	}
+#endif
+
+	writel(cmd | HOST_TID << 12 | tid, &msg->u.head[1]);
 	writel(i2o_scsi_driver.context, &msg->u.s.icntxt);
 
 	/* We want the SCSI control block back */
@@ -655,55 +726,30 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 	/* Write SCSI command into the message - always 16 byte block */
 	memcpy_toio(mptr, SCpnt->cmnd, 16);
 	mptr += 4;
-	lenptr = mptr++;	/* Remember me - fill in when we know */
-
-	/* Now fill in the SGList and command */
-	if (SCpnt->use_sg) {
-		struct scatterlist *sg;
-		int sg_count;
-
-		sg = SCpnt->request_buffer;
-		len = 0;
 
-		sg_count = dma_map_sg(dev, sg, SCpnt->use_sg,
-				      SCpnt->sc_data_direction);
-
-		if (unlikely(sg_count <= 0))
-			return -ENOMEM;
-
-		for (i = SCpnt->use_sg; i > 0; i--) {
-			if (i == 1)
-				sg_flags |= 0xC0000000;
-			writel(sg_flags | sg_dma_len(sg), mptr++);
-			writel(sg_dma_address(sg), mptr++);
-			len += sg_dma_len(sg);
-			sg++;
-		}
-
-		writel(len, lenptr);
-	} else {
-		len = SCpnt->request_bufflen;
-
-		writel(len, lenptr);
-
-		if (len > 0) {
-			dma_addr_t dma_addr;
-
-			dma_addr = dma_map_single(dev, SCpnt->request_buffer,
-						  SCpnt->request_bufflen,
-						  SCpnt->sc_data_direction);
-			if (!dma_addr)
-				return -ENOMEM;
-
-			SCpnt->SCp.ptr = (void *)(unsigned long)dma_addr;
-			sg_flags |= 0xC0000000;
-			writel(sg_flags | SCpnt->request_bufflen, mptr++);
-			writel(dma_addr, mptr++);
+	if (sgl_offset != SGL_OFFSET_0) {
+		/* write size of data addressed by SGL */
+		writel(SCpnt->request_bufflen, mptr++);
+
+		/* Now fill in the SGList and command */
+		if (SCpnt->use_sg) {
+			if (!i2o_dma_map_sg(c, SCpnt->request_buffer,
+					    SCpnt->use_sg,
+					    SCpnt->sc_data_direction, &mptr))
+				goto nomem;
+		} else {
+			SCpnt->SCp.dma_handle =
+			    i2o_dma_map_single(c, SCpnt->request_buffer,
+					       SCpnt->request_bufflen,
+					       SCpnt->sc_data_direction, &mptr);
+			if (dma_mapping_error(SCpnt->SCp.dma_handle))
+				goto nomem;
 		}
 	}
 
 	/* Stick the headers on */
-	writel((mptr - &msg->u.head[0]) << 16 | SGL_OFFSET_10, &msg->u.head[0]);
+	writel(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | sgl_offset,
+	       &msg->u.head[0]);
 
 	/* Queue the message */
 	i2o_msg_post(c, m);
@@ -711,6 +757,13 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 	osm_debug("Issued %ld\n", SCpnt->serial_number);
 
 	return 0;
+
+      nomem:
+	rc = -ENOMEM;
+	i2o_msg_nop(c, m);
+
+      exit:
+	return rc;
 };
 
 /**
diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c
index a499af096a68..964fe481849e 100644
--- a/drivers/message/i2o/pci.c
+++ b/drivers/message/i2o/pci.c
@@ -362,11 +362,33 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
 		c->promise = 1;
 	}
 
+	if (pdev->subsystem_vendor == PCI_VENDOR_ID_DPT)
+		c->adaptec = 1;
+
 	/* Cards that go bananas if you quiesce them before you reset them. */
 	if (pdev->vendor == PCI_VENDOR_ID_DPT) {
 		c->no_quiesce = 1;
 		if (pdev->device == 0xa511)
 			c->raptor = 1;
+
+		if (pdev->subsystem_device == 0xc05a) {
+			c->limit_sectors = 1;
+			printk(KERN_INFO
+			       "%s: limit sectors per request to %d\n", c->name,
+			       I2O_MAX_SECTORS_LIMITED);
+		}
+#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
+		if (sizeof(dma_addr_t) > 4) {
+			if (pci_set_dma_mask(pdev, DMA_64BIT_MASK))
+				printk(KERN_INFO "%s: 64-bit DMA unavailable\n",
+				       c->name);
+			else {
+				c->pae_support = 1;
+				printk(KERN_INFO "%s: using 64-bit DMA\n",
+				       c->name);
+			}
+		}
+#endif
 	}
 
 	if ((rc = i2o_pci_alloc(c))) {
diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h
index 90c984ecd521..d4a08d29e36d 100644
--- a/include/linux/i2o-dev.h
+++ b/include/linux/i2o-dev.h
@@ -33,6 +33,13 @@ typedef unsigned int u32;
 #endif				/* __KERNEL__ */
 
 /*
+ *	Software module types
+ */
+#define I2O_SOFTWARE_MODULE_IRTOS		0x11
+#define I2O_SOFTWARE_MODULE_IOP_PRIVATE		0x22
+#define I2O_SOFTWARE_MODULE_IOP_CONFIG		0x23
+
+/*
  *	Vendors
  */
 #define I2O_VENDOR_DPT				0x001b
@@ -125,6 +132,10 @@ struct i2o_evt_get {
 	int lost;
 };
 
+typedef struct i2o_sg_io_hdr {
+	unsigned int flags;	/* see I2O_DPT_SG_IO_FLAGS */
+} i2o_sg_io_hdr_t;
+
 /**************************************************************************
  * HRT related constants and structures
  **************************************************************************/
@@ -403,4 +414,15 @@ typedef struct _i2o_status_block {
 #define ADAPTER_STATE_FAILED			0x10
 #define ADAPTER_STATE_FAULTED			0x11
 
+
+/*
+ * DPT / Adaptec specific values for i2o_sg_io_hdr flags.
+ */
+#define I2O_DPT_SG_FLAG_INTERPRET		0x00010000
+#define I2O_DPT_SG_FLAG_PHYSICAL		0x00020000
+
+#define I2O_DPT_FLASH_FRAG_SIZE			0x10000
+#define I2O_DPT_FLASH_READ			0x0101
+#define I2O_DPT_FLASH_WRITE			0x0102
+
 #endif				/* _I2O_DEV_H */
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index 497ea574f96b..2039a87c2b91 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -147,10 +147,13 @@ struct i2o_controller {
 
 	struct pci_dev *pdev;	/* PCI device */
 
-	unsigned int short_req:1;	/* use small block sizes */
-	unsigned int no_quiesce:1;	/* dont quiesce before reset */
-	unsigned int raptor:1;		/* split bar */
 	unsigned int promise:1;		/* Promise controller */
+	unsigned int adaptec:1;		/* DPT / Adaptec controller */
+	unsigned int raptor:1;	/* split bar */
+	unsigned int no_quiesce:1;	/* dont quiesce before reset */
+	unsigned int short_req:1;	/* use small block sizes */
+	unsigned int limit_sectors:1;	/* limit number of sectors / request */
+	unsigned int pae_support:1;	/* controller has 64-bit SGL support */
 
 	struct list_head devices;	/* list of I2O devices */
 	struct list_head list;	/* Controller list */
@@ -746,7 +749,21 @@ static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct i2o_controll
 static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr,
 				size_t len, unsigned int gfp_mask)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
+	int dma_64 = 0;
+
+	if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) {
+			dma_64 = 1;
+			if(pci_set_dma_mask(pdev, DMA_32BIT_MASK))
+				return -ENOMEM;
+	}
+
 	addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask);
+
+	if ((sizeof(dma_addr_t) > 4) && dma_64)
+		if(pci_set_dma_mask(pdev, DMA_64BIT_MASK))
+			printk(KERN_WARNING "i2o: unable to set 64-bit DMA");
+
 	if (!addr->virt)
 		return -ENOMEM;
 
@@ -946,7 +963,7 @@ extern void i2o_debug_state(struct i2o_controller *c);
 #define I2O_CMD_BLOCK_MEJECT		0x43
 #define I2O_CMD_BLOCK_POWER		0x70
 
-#define I2O_PRIVATE_MSG			0xFF
+#define I2O_CMD_PRIVATE			0xFF
 
 /* Command status values  */
 
@@ -1095,9 +1112,9 @@ extern void i2o_debug_state(struct i2o_controller *c);
 #define SGL_OFFSET_8    (0x0080 | I2OVERSION)
 #define SGL_OFFSET_9    (0x0090 | I2OVERSION)
 #define SGL_OFFSET_10   (0x00A0 | I2OVERSION)
-
-#define TRL_OFFSET_5    (0x0050 | I2OVERSION)
-#define TRL_OFFSET_6    (0x0060 | I2OVERSION)
+#define SGL_OFFSET_11   (0x00B0 | I2OVERSION)
+#define SGL_OFFSET_12   (0x00C0 | I2OVERSION)
+#define SGL_OFFSET(x)   (((x)<<4) | I2OVERSION)
 
 /* Transaction Reply Lists (TRL) Control Word structure */
 #define TRL_SINGLE_FIXED_LENGTH		0x00
@@ -1130,7 +1147,6 @@ extern void i2o_debug_state(struct i2o_controller *c);
 #define HOST_TID		1
 
 #define MSG_FRAME_SIZE		128	/* i2o_scsi assumes >= 32 */
-#define REPLY_FRAME_SIZE	17
 #define SG_TABLESIZE		30
 #define NMBR_MSG_FRAMES		128
 
@@ -1155,11 +1171,10 @@ extern void i2o_debug_state(struct i2o_controller *c);
 #define I2O_HRT_GET_TRIES		3
 #define I2O_LCT_GET_TRIES		3
 
-/* request queue sizes */
+/* defines for max_sectors and max_phys_segments */
 #define I2O_MAX_SECTORS			1024
+#define I2O_MAX_SECTORS_LIMITED		256
 #define I2O_MAX_PHYS_SEGMENTS		MAX_PHYS_SEGMENTS
 
-#define I2O_REQ_MEMPOOL_SIZE		32
-
 #endif				/* __KERNEL__ */
 #endif				/* _I2O_H */
diff --git a/include/scsi/sg_request.h b/include/scsi/sg_request.h
new file mode 100644
index 000000000000..57ff525bdd3b
--- /dev/null
+++ b/include/scsi/sg_request.h
@@ -0,0 +1,26 @@
+typedef struct scsi_request Scsi_Request;
+
+static Scsi_Request *dummy_cmdp;	/* only used for sizeof */
+
+typedef struct sg_scatter_hold { /* holding area for scsi scatter gather info */
+	unsigned short k_use_sg; /* Count of kernel scatter-gather pieces */
+	unsigned short sglist_len; /* size of malloc'd scatter-gather list ++ */
+	unsigned bufflen;	/* Size of (aggregate) data buffer */
+	unsigned b_malloc_len;	/* actual len malloc'ed in buffer */
+	void *buffer;		/* Data buffer or scatter list (k_use_sg>0) */
+	char dio_in_use;	/* 0->indirect IO (or mmap), 1->dio */
+	unsigned char cmd_opcode; /* first byte of command */
+} Sg_scatter_hold;
+
+typedef struct sg_request {	/* SG_MAX_QUEUE requests outstanding per file */
+	Scsi_Request *my_cmdp;	/* != 0  when request with lower levels */
+	struct sg_request *nextrp;	/* NULL -> tail request (slist) */
+	struct sg_fd *parentfp;	/* NULL -> not in use */
+	Sg_scatter_hold data;	/* hold buffer, perhaps scatter list */
+	sg_io_hdr_t header;	/* scsi command+info, see <scsi/sg.h> */
+	unsigned char sense_b[sizeof (dummy_cmdp->sr_sense_buffer)];
+	char res_used;		/* 1 -> using reserve buffer, 0 -> not ... */
+	char orphan;		/* 1 -> drop on sight, 0 -> normal */
+	char sg_io_owned;	/* 1 -> packet belongs to SG_IO */
+	volatile char done;	/* 0->before bh, 1->before read, 2->read */
+} Sg_request;