summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRoger Quadros <rogerq@ti.com>2017-04-21 16:15:38 +0300
committerDavid S. Miller <davem@davemloft.net>2017-04-24 12:40:24 -0400
commit69226896ad636b94f6d2e55d75ff21a29c4de83b (patch)
treef5df9ce46570ffe61c581a9feb68471c9a86cdee
parent15769ff8b6d560a358761598aad5fc413ce2251b (diff)
mdio_bus: Issue GPIO RESET to PHYs.
Some boards [1] leave the PHYs at an invalid state during system power-up or reset thus causing unreliability issues with the PHY which manifests as PHY not being detected or link not functional. To fix this, these PHYs need to be RESET via a GPIO connected to the PHY's RESET pin. Some boards have a single GPIO controlling the PHY RESET pin of all PHYs on the bus whereas some others have separate GPIOs controlling individual PHY RESETs. In both cases, the RESET de-assertion cannot be done in the PHY driver as the PHY will not probe till its reset is de-asserted. So do the RESET de-assertion in the MDIO bus driver. [1] - am572x-idk, am571x-idk, a437x-idk Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--Documentation/devicetree/bindings/net/mdio.txt33
-rw-r--r--drivers/net/phy/mdio_bus.c47
-rw-r--r--drivers/of/of_mdio.c7
-rw-r--r--include/linux/phy.h7
4 files changed, 94 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt
new file mode 100644
index 000000000000..4ffbbacebda1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio.txt
@@ -0,0 +1,33 @@
+Common MDIO bus properties.
+
+These are generic properties that can apply to any MDIO bus.
+
+Optional properties:
+- reset-gpios: List of one or more GPIOs that control the RESET lines
+ of the PHYs on that MDIO bus.
+- reset-delay-us: RESET pulse width in microseconds as per PHY datasheet.
+
+A list of child nodes, one per device on the bus is expected. These
+should follow the generic phy.txt, or a device specific binding document.
+
+Example :
+This example shows these optional properties, plus other properties
+required for the TI Davinci MDIO driver.
+
+ davinci_mdio: ethernet@0x5c030000 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x5c030000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2>; /* PHY datasheet states 1us min */
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy1: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 5a214f3b8671..a898e5c4ef1b 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -22,8 +22,11 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_device.h>
#include <linux/of_mdio.h>
+#include <linux/of_gpio.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
@@ -337,6 +340,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
{
struct mdio_device *mdiodev;
int i, err;
+ struct gpio_desc *gpiod;
if (NULL == bus || NULL == bus->name ||
NULL == bus->read || NULL == bus->write)
@@ -363,6 +367,35 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
if (bus->reset)
bus->reset(bus);
+ /* de-assert bus level PHY GPIO resets */
+ if (bus->num_reset_gpios > 0) {
+ bus->reset_gpiod = devm_kcalloc(&bus->dev,
+ bus->num_reset_gpios,
+ sizeof(struct gpio_desc *),
+ GFP_KERNEL);
+ if (!bus->reset_gpiod)
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < bus->num_reset_gpios; i++) {
+ gpiod = devm_gpiod_get_index(&bus->dev, "reset", i,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod)) {
+ err = PTR_ERR(gpiod);
+ if (err != -ENOENT) {
+ dev_err(&bus->dev,
+ "mii_bus %s couldn't get reset GPIO\n",
+ bus->id);
+ return err;
+ }
+ } else {
+ bus->reset_gpiod[i] = gpiod;
+ gpiod_set_value_cansleep(gpiod, 1);
+ udelay(bus->reset_delay_us);
+ gpiod_set_value_cansleep(gpiod, 0);
+ }
+ }
+
for (i = 0; i < PHY_MAX_ADDR; i++) {
if ((bus->phy_mask & (1 << i)) == 0) {
struct phy_device *phydev;
@@ -390,6 +423,13 @@ error:
mdiodev->device_remove(mdiodev);
mdiodev->device_free(mdiodev);
}
+
+ /* Put PHYs in RESET to save power */
+ for (i = 0; i < bus->num_reset_gpios; i++) {
+ if (bus->reset_gpiod[i])
+ gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
+ }
+
device_del(&bus->dev);
return err;
}
@@ -411,6 +451,13 @@ void mdiobus_unregister(struct mii_bus *bus)
mdiodev->device_remove(mdiodev);
mdiodev->device_free(mdiodev);
}
+
+ /* Put PHYs in RESET to save power */
+ for (i = 0; i < bus->num_reset_gpios; i++) {
+ if (bus->reset_gpiod[i])
+ gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
+ }
+
device_del(&bus->dev);
}
EXPORT_SYMBOL(mdiobus_unregister);
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 0b2979816dbf..7e4c80f9b6cd 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -22,6 +22,8 @@
#include <linux/of_net.h>
#include <linux/module.h>
+#define DEFAULT_GPIO_RESET_DELAY 10 /* in microseconds */
+
MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
MODULE_LICENSE("GPL");
@@ -221,6 +223,11 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
mdio->dev.of_node = np;
+ /* Get bus level PHY reset GPIO details */
+ mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
+ of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
+ mdio->num_reset_gpios = of_gpio_named_count(np, "reset-gpios");
+
/* Register the MDIO bus */
rc = mdiobus_register(mdio);
if (rc)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 624cecf69c28..37ca77d86983 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -217,6 +217,13 @@ struct mii_bus {
* matching its address
*/
int irq[PHY_MAX_ADDR];
+
+ /* GPIO reset pulse width in microseconds */
+ int reset_delay_us;
+ /* Number of reset GPIOs */
+ int num_reset_gpios;
+ /* Array of RESET GPIO descriptors */
+ struct gpio_desc **reset_gpiod;
};
#define to_mii_bus(d) container_of(d, struct mii_bus, dev)