Merge tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of tiny USB fixes for 5.13-rc6.

  There are more than I would normally like, but there's been a bunch of
  people banging on the gadget and dwc3 and typec code recently for I
  think an Android release, which has resulted in a number of small
  fixes. It's nice to see companies send fixes upstream for this type of
  work, a notable change from years ago.

  Anyway, fixes in here are:

   - usb-serial device id updates

   - usb-serial cp210x driver fixes for broken firmware versions

   - typec fixes for crazy charging devices and other reported problems

   - dwc3 fixes for reported problems found

   - gadget fixes for reported problems

   - tiny xhci fixes

   - other small fixes for reported issues.

   - revert of a problem fix found by linux-next testing

  All of these have passed 0-day and linux-next testing with no reported
  problems (the revert for the found linux-next build problem included)"

* tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits)
  Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs"
  usb: typec: mux: Fix copy-paste mistake in typec_mux_match
  usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path
  usb: gadget: fsl: Re-enable driver for ARM SoCs
  usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
  USB: serial: cp210x: fix CP2102N-A01 modem control
  USB: serial: cp210x: fix alternate function for CP2102N QFN20
  usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource()
  usb: dwc3: ep0: fix NULL pointer exception
  usb: gadget: eem: fix wrong eem header operation
  usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()
  usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
  usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()
  usb: typec: tcpm: Do not finish VDM AMS for retrying Responses
  usb: fix various gadget panics on 10gbps cabling
  usb: fix various gadgets null ptr deref on 10gbps cabling.
  usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
  usb: f_ncm: only first packet of aggregate needs to start timer
  USB: f_ncm: ncm_bitrate (speed) is unsigned
  MAINTAINERS: usb: add entry for isp1760
  ...

40 files changed, 357 insertions, 144 deletions

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 32509b98142e..92b49bc37939 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -149,6 +149,17 @@ properties:
     maxItems: 6
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
+  sink-vdos-v1:
+    description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
+      providing additional information corresponding to the product, the detailed bit
+      definitions and the order of each VDO can be found in
+      "USB Power Delivery Specification Revision 2.0, Version 1.3" chapter 6.4.4.3.1 Discover
+      Identity. User can specify the VDO array via VDO_IDH/_CERT/_PRODUCT/_CABLE/_AMA defined in
+      dt-bindings/usb/pd.h.
+    minItems: 3
+    maxItems: 6
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
   op-sink-microwatt:
     description: Sink required operating power in microwatt, if source can't
       offer the power, Capability Mismatch is set. Required for power sink and
@@ -207,6 +218,10 @@ properties:
       SNK_READY for non-pd link.
     type: boolean
 
+dependencies:
+  sink-vdos-v1: [ 'sink-vdos' ]
+  sink-vdos: [ 'sink-vdos-v1' ]
+
 required:
   - compatible
 
diff --git a/MAINTAINERS b/MAINTAINERS
index b706dd20ff2b..bc0ceef87b73 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18873,6 +18873,13 @@ S:	Maintained
 F:	drivers/usb/host/isp116x*
 F:	include/linux/usb/isp116x.h
 
+USB ISP1760 DRIVER
+M:	Rui Miguel Silva <rui.silva@linaro.org>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/usb/isp1760/*
+F:	Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
+
 USB LAN78XX ETHERNET DRIVER
 M:	Woojung Huh <woojung.huh@microchip.com>
 M:	UNGLinuxDriver@microchip.com
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
index a8b7b50abf64..5281f8d3fb3d 100644
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -2007,7 +2007,7 @@ static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
 		else
 			mask = BIT(priv_ep->num);
 
-		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir) {
 			cdns3_set_register_bit(&regs->tdl_from_trb, mask);
 			cdns3_set_register_bit(&regs->tdl_beh, mask);
 			cdns3_set_register_bit(&regs->tdl_beh2, mask);
@@ -2046,15 +2046,13 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable)
 	case USB_ENDPOINT_XFER_INT:
 		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
 
-		if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
-		    priv_dev->dev_ver > DEV_VER_V2)
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
 			ep_cfg |= EP_CFG_TDL_CHK;
 		break;
 	case USB_ENDPOINT_XFER_BULK:
 		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
 
-		if ((priv_dev->dev_ver == DEV_VER_V2  && !priv_ep->dir) ||
-		    priv_dev->dev_ver > DEV_VER_V2)
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
 			ep_cfg |= EP_CFG_TDL_CHK;
 		break;
 	default:
diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c
index 5f0513c96c04..68972746e363 100644
--- a/drivers/usb/cdns3/cdnsp-ring.c
+++ b/drivers/usb/cdns3/cdnsp-ring.c
@@ -1517,13 +1517,14 @@ irqreturn_t cdnsp_thread_irq_handler(int irq, void *data)
 {
 	struct cdnsp_device *pdev = (struct cdnsp_device *)data;
 	union cdnsp_trb *event_ring_deq;
+	unsigned long flags;
 	int counter = 0;
 
-	spin_lock(&pdev->lock);
+	spin_lock_irqsave(&pdev->lock, flags);
 
 	if (pdev->cdnsp_state & (CDNSP_STATE_HALTED | CDNSP_STATE_DYING)) {
 		cdnsp_died(pdev);
-		spin_unlock(&pdev->lock);
+		spin_unlock_irqrestore(&pdev->lock, flags);
 		return IRQ_HANDLED;
 	}
 
@@ -1539,7 +1540,7 @@ irqreturn_t cdnsp_thread_irq_handler(int irq, void *data)
 
 	cdnsp_update_erst_dequeue(pdev, event_ring_deq, 1);
 
-	spin_unlock(&pdev->lock);
+	spin_unlock_irqrestore(&pdev->lock, flags);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b6e53d8212cd..21129d357f29 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1690,11 +1690,6 @@ static int dwc3_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static void dwc3_shutdown(struct platform_device *pdev)
-{
-	dwc3_remove(pdev);
-}
-
 #ifdef CONFIG_PM
 static int dwc3_core_init_for_resume(struct dwc3 *dwc)
 {
@@ -2012,7 +2007,6 @@ MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
 static struct platform_driver dwc3_driver = {
 	.probe		= dwc3_probe,
 	.remove		= dwc3_remove,
-	.shutdown   = dwc3_shutdown,
 	.driver		= {
 		.name	= "dwc3",
 		.of_match_table	= of_match_ptr(of_dwc3_match),
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index d0ac89c5b317..d223c54115f4 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -413,9 +413,12 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status)
 
 
 #ifdef CONFIG_DEBUG_FS
+extern void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep);
 extern void dwc3_debugfs_init(struct dwc3 *d);
 extern void dwc3_debugfs_exit(struct dwc3 *d);
 #else
+static inline void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
+{  }
 static inline void dwc3_debugfs_init(struct dwc3 *d)
 {  }
 static inline void dwc3_debugfs_exit(struct dwc3 *d)
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 7146ee2ac057..5dbbe53269d3 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -886,30 +886,14 @@ static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep,
 	}
 }
 
-static void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep,
-		struct dentry *parent)
+void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
 {
 	struct dentry		*dir;
 
-	dir = debugfs_create_dir(dep->name, parent);
+	dir = debugfs_create_dir(dep->name, dep->dwc->root);
 	dwc3_debugfs_create_endpoint_files(dep, dir);
 }
 
-static void dwc3_debugfs_create_endpoint_dirs(struct dwc3 *dwc,
-		struct dentry *parent)
-{
-	int			i;
-
-	for (i = 0; i < dwc->num_eps; i++) {
-		struct dwc3_ep	*dep = dwc->eps[i];
-
-		if (!dep)
-			continue;
-
-		dwc3_debugfs_create_endpoint_dir(dep, parent);
-	}
-}
-
 void dwc3_debugfs_init(struct dwc3 *dwc)
 {
 	struct dentry		*root;
@@ -940,7 +924,6 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
 				&dwc3_testmode_fops);
 		debugfs_create_file("link_state", 0644, root, dwc,
 				    &dwc3_link_state_fops);
-		dwc3_debugfs_create_endpoint_dirs(dwc, root);
 	}
 }
 
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index bdf1f98dfad8..ffe301d6ea35 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -651,7 +651,7 @@ static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
 		return PTR_ERR(priv->usb_glue_regmap);
 
 	/* Create a regmap for each USB2 PHY control register set */
-	for (i = 0; i < priv->usb2_ports; i++) {
+	for (i = 0; i < priv->drvdata->num_phys; i++) {
 		struct regmap_config u2p_regmap_config = {
 			.reg_bits = 8,
 			.val_bits = 32,
@@ -659,6 +659,9 @@ static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
 			.max_register = U2P_R1,
 		};
 
+		if (!strstr(priv->drvdata->phy_names[i], "usb2"))
+			continue;
+
 		u2p_regmap_config.name = devm_kasprintf(priv->dev, GFP_KERNEL,
 							"u2p-%d", i);
 		if (!u2p_regmap_config.name)
@@ -772,13 +775,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 
 	ret = priv->drvdata->usb_init(priv);
 	if (ret)
-		goto err_disable_clks;
+		goto err_disable_regulator;
 
 	/* Init PHYs */
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		ret = phy_init(priv->phys[i]);
 		if (ret)
-			goto err_disable_clks;
+			goto err_disable_regulator;
 	}
 
 	/* Set PHY Power */
@@ -816,6 +819,10 @@ err_phys_exit:
 	for (i = 0 ; i < PHY_COUNT ; ++i)
 		phy_exit(priv->phys[i]);
 
+err_disable_regulator:
+	if (priv->vbus)
+		regulator_disable(priv->vbus);
+
 err_disable_clks:
 	clk_bulk_disable_unprepare(priv->drvdata->num_clks,
 				   priv->drvdata->clks);
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 8b668ef46f7f..3cd294264372 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -292,6 +292,9 @@ static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
 		epnum |= 1;
 
 	dep = dwc->eps[epnum];
+	if (dep == NULL)
+		return NULL;
+
 	if (dep->flags & DWC3_EP_ENABLED)
 		return dep;
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 612825a39f82..f14c2aa83759 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2261,13 +2261,10 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 	}
 
 	/*
-	 * Synchronize any pending event handling before executing the controller
-	 * halt routine.
+	 * Synchronize and disable any further event handling while controller
+	 * is being enabled/disabled.
 	 */
-	if (!is_on) {
-		dwc3_gadget_disable_irq(dwc);
-		synchronize_irq(dwc->irq_gadget);
-	}
+	disable_irq(dwc->irq_gadget);
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
@@ -2305,6 +2302,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 
 	ret = dwc3_gadget_run_stop(dwc, is_on, false);
 	spin_unlock_irqrestore(&dwc->lock, flags);
+	enable_irq(dwc->irq_gadget);
+
 	pm_runtime_put(dwc->dev);
 
 	return ret;
@@ -2754,6 +2753,8 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum)
 	INIT_LIST_HEAD(&dep->started_list);
 	INIT_LIST_HEAD(&dep->cancelled_list);
 
+	dwc3_debugfs_create_endpoint_dir(dep);
+
 	return 0;
 }
 
@@ -2797,6 +2798,7 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
 			list_del(&dep->endpoint.ep_list);
 		}
 
+		debugfs_remove_recursive(debugfs_lookup(dep->name, dwc->root));
 		kfree(dep);
 	}
 }
@@ -4046,6 +4048,7 @@ err5:
 	dwc3_gadget_free_endpoints(dwc);
 err4:
 	usb_put_gadget(dwc->gadget);
+	dwc->gadget = NULL;
 err3:
 	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
 			dwc->bounce_addr);
@@ -4065,6 +4068,9 @@ err0:
 
 void dwc3_gadget_exit(struct dwc3 *dwc)
 {
+	if (!dwc->gadget)
+		return;
+
 	usb_del_gadget(dwc->gadget);
 	dwc3_gadget_free_endpoints(dwc);
 	usb_put_gadget(dwc->gadget);
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index 8bb25773b61e..05507606b2b4 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -164,6 +164,14 @@ int usb_assign_descriptors(struct usb_function *f,
 {
 	struct usb_gadget *g = f->config->cdev->gadget;
 
+	/* super-speed-plus descriptor falls back to super-speed one,
+	 * if such a descriptor was provided, thus avoiding a NULL
+	 * pointer dereference if a 5gbps capable gadget is used with
+	 * a 10gbps capable config (device port + cable + host port)
+	 */
+	if (!ssp)
+		ssp = ss;
+
 	if (fs) {
 		f->fs_descriptors = usb_copy_descriptors(fs);
 		if (!f->fs_descriptors)
diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c
index 7f5cf488b2b1..ffe2486fce71 100644
--- a/drivers/usb/gadget/function/f_ecm.c
+++ b/drivers/usb/gadget/function/f_ecm.c
@@ -791,7 +791,7 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 		fs_ecm_notify_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function,
-			ecm_ss_function, NULL);
+			ecm_ss_function, ecm_ss_function);
 	if (status)
 		goto fail;
 
diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c
index cfcc4e81fb77..2cd9942707b4 100644
--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -302,7 +302,7 @@ static int eem_bind(struct usb_configuration *c, struct usb_function *f)
 	eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function,
-			eem_ss_function, NULL);
+			eem_ss_function, eem_ss_function);
 	if (status)
 		goto fail;
 
@@ -495,7 +495,7 @@ static int eem_unwrap(struct gether *port,
 			skb2 = skb_clone(skb, GFP_ATOMIC);
 			if (unlikely(!skb2)) {
 				DBG(cdev, "unable to unframe EEM packet\n");
-				continue;
+				goto next;
 			}
 			skb_trim(skb2, len - ETH_FCS_LEN);
 
@@ -505,7 +505,7 @@ static int eem_unwrap(struct gether *port,
 						GFP_ATOMIC);
 			if (unlikely(!skb3)) {
 				dev_kfree_skb_any(skb2);
-				continue;
+				goto next;
 			}
 			dev_kfree_skb_any(skb2);
 			skb_queue_tail(list, skb3);
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index bf109191659a..d4844afeaffc 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -3567,6 +3567,9 @@ static void ffs_func_unbind(struct usb_configuration *c,
 		ffs->func = NULL;
 	}
 
+	/* Drain any pending AIO completions */
+	drain_workqueue(ffs->io_completion_wq);
+
 	if (!--opts->refcnt)
 		functionfs_unbind(ffs);
 
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 1125f4715830..e55699308117 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -802,7 +802,8 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f)
 		hidg_fs_out_ep_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, hidg_fs_descriptors,
-			hidg_hs_descriptors, hidg_ss_descriptors, NULL);
+			hidg_hs_descriptors, hidg_ss_descriptors,
+			hidg_ss_descriptors);
 	if (status)
 		goto fail;
 
diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c
index b56ad7c3838b..ae41f556eb75 100644
--- a/drivers/usb/gadget/function/f_loopback.c
+++ b/drivers/usb/gadget/function/f_loopback.c
@@ -207,7 +207,7 @@ autoconf_fail:
 	ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs,
-			ss_loopback_descs, NULL);
+			ss_loopback_descs, ss_loopback_descs);
 	if (ret)
 		return ret;
 
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index 019bea8e09cc..855127249f24 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -583,7 +583,7 @@ static void ncm_do_notify(struct f_ncm *ncm)
 		data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget));
 		data[1] = data[0];
 
-		DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget));
+		DBG(cdev, "notify speed %u\n", ncm_bitrate(cdev->gadget));
 		ncm->notify_state = NCM_NOTIFY_CONNECT;
 		break;
 	}
@@ -1101,11 +1101,11 @@ static struct sk_buff *ncm_wrap_ntb(struct gether *port,
 			ncm->ndp_dgram_count = 1;
 
 			/* Note: we skip opts->next_ndp_index */
-		}
 
-		/* Delay the timer. */
-		hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS,
-			      HRTIMER_MODE_REL_SOFT);
+			/* Start the timer. */
+			hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS,
+				      HRTIMER_MODE_REL_SOFT);
+		}
 
 		/* Add the datagram position entries */
 		ntb_ndp = skb_put_zero(ncm->skb_tx_ndp, dgram_idx_len);
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index f47fdc1fa7f1..59d382fe1bbf 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1101,7 +1101,8 @@ autoconf_fail:
 	ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, fs_printer_function,
-			hs_printer_function, ss_printer_function, NULL);
+			hs_printer_function, ss_printer_function,
+			ss_printer_function);
 	if (ret)
 		return ret;
 
diff --git a/drivers/usb/gadget/function/f_rndis.c b/drivers/usb/gadget/function/f_rndis.c
index 0739b05a0ef7..ee95e8f5f9d4 100644
--- a/drivers/usb/gadget/function/f_rndis.c
+++ b/drivers/usb/gadget/function/f_rndis.c
@@ -789,7 +789,7 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 	ss_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, eth_fs_function, eth_hs_function,
-			eth_ss_function, NULL);
+			eth_ss_function, eth_ss_function);
 	if (status)
 		goto fail;
 
diff --git a/drivers/usb/gadget/function/f_serial.c b/drivers/usb/gadget/function/f_serial.c
index e62713846350..1ed8ff0ac2d3 100644
--- a/drivers/usb/gadget/function/f_serial.c
+++ b/drivers/usb/gadget/function/f_serial.c
@@ -233,7 +233,7 @@ static int gser_bind(struct usb_configuration *c, struct usb_function *f)
 	gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
-			gser_ss_function, NULL);
+			gser_ss_function, gser_ss_function);
 	if (status)
 		goto fail;
 	dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index 5a201ba7b155..1abf08e5164a 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -431,7 +431,8 @@ no_iso:
 	ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, fs_source_sink_descs,
-			hs_source_sink_descs, ss_source_sink_descs, NULL);
+			hs_source_sink_descs, ss_source_sink_descs,
+			ss_source_sink_descs);
 	if (ret)
 		return ret;
 
diff --git a/drivers/usb/gadget/function/f_subset.c b/drivers/usb/gadget/function/f_subset.c
index 4d945254905d..51c1cae162d9 100644
--- a/drivers/usb/gadget/function/f_subset.c
+++ b/drivers/usb/gadget/function/f_subset.c
@@ -358,7 +358,7 @@ geth_bind(struct usb_configuration *c, struct usb_function *f)
 		fs_subset_out_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function,
-			ss_eth_function, NULL);
+			ss_eth_function, ss_eth_function);
 	if (status)
 		goto fail;
 
diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c
index 7acb507946e6..de161ee0b1f9 100644
--- a/drivers/usb/gadget/function/f_tcm.c
+++ b/drivers/usb/gadget/function/f_tcm.c
@@ -2057,7 +2057,8 @@ static int tcm_bind(struct usb_configuration *c, struct usb_function *f)
 	uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, uasp_fs_function_desc,
-			uasp_hs_function_desc, uasp_ss_function_desc, NULL);
+			uasp_hs_function_desc, uasp_ss_function_desc,
+			uasp_ss_function_desc);
 	if (ret)
 		goto ep_fail;
 
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 7bc18cf8042c..18c2bbddf080 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -59,6 +59,7 @@
 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI		0x1138
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI		0x461e
 
+#define PCI_DEVICE_ID_AMD_RENOIR_XHCI			0x1639
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4			0x43b9
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_2			0x43bb
@@ -182,6 +183,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
 		xhci->quirks |= XHCI_U2_DISABLE_WAKE;
 
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+		pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
+		xhci->quirks |= XHCI_BROKEN_D3COLD;
+
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 		xhci->quirks |= XHCI_INTEL_HOST;
@@ -539,7 +544,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	 * Systems with the TI redriver that loses port status change events
 	 * need to have the registers polled during D3, so avoid D3cold.
 	 */
-	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+	if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD))
 		pci_d3cold_disable(pdev);
 
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 2595a8f057c4..e417f5ce13d1 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1892,6 +1892,7 @@ struct xhci_hcd {
 #define XHCI_DISABLE_SPARSE	BIT_ULL(38)
 #define XHCI_SG_TRB_CACHE_SIZE_QUIRK	BIT_ULL(39)
 #define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
+#define XHCI_BROKEN_D3COLD	BIT_ULL(41)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
diff --git a/drivers/usb/misc/brcmstb-usb-pinmap.c b/drivers/usb/misc/brcmstb-usb-pinmap.c
index b3cfe8666ea7..336653091e3b 100644
--- a/drivers/usb/misc/brcmstb-usb-pinmap.c
+++ b/drivers/usb/misc/brcmstb-usb-pinmap.c
@@ -263,6 +263,8 @@ static int __init brcmstb_usb_pinmap_probe(struct platform_device *pdev)
 		return -EINVAL;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -EINVAL;
 
 	pdata = devm_kzalloc(&pdev->dev,
 			     sizeof(*pdata) +
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 8f09a387b773..4c8f0112481f 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2009,9 +2009,8 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 			schedule_delayed_work(&musb->irq_work,
 					      msecs_to_jiffies(1000));
 			musb->quirk_retries--;
-			break;
 		}
-		fallthrough;
+		break;
 	case MUSB_QUIRK_B_INVALID_VBUS_91:
 		if (musb->quirk_retries && !musb->flush_irq_work) {
 			musb_dbg(musb,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index ee595d1bea0a..fcb812bc832c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -252,9 +252,11 @@ struct cp210x_serial_private {
 	u8			gpio_input;
 #endif
 	u8			partnum;
+	u32			fw_version;
 	speed_t			min_speed;
 	speed_t			max_speed;
 	bool			use_actual_rate;
+	bool			no_flow_control;
 };
 
 enum cp210x_event_state {
@@ -398,6 +400,7 @@ struct cp210x_special_chars {
 
 /* CP210X_VENDOR_SPECIFIC values */
 #define CP210X_READ_2NCONFIG	0x000E
+#define CP210X_GET_FW_VER_2N	0x0010
 #define CP210X_READ_LATCH	0x00C2
 #define CP210X_GET_PARTNUM	0x370B
 #define CP210X_GET_PORTCONFIG	0x370C
@@ -537,6 +540,12 @@ struct cp210x_single_port_config {
 #define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX	587
 #define CP210X_2NCONFIG_GPIO_CONTROL_IDX	600
 
+/* CP2102N QFN20 port configuration values */
+#define CP2102N_QFN20_GPIO2_TXLED_MODE		BIT(2)
+#define CP2102N_QFN20_GPIO3_RXLED_MODE		BIT(3)
+#define CP2102N_QFN20_GPIO1_RS485_MODE		BIT(4)
+#define CP2102N_QFN20_GPIO0_CLK_MODE		BIT(6)
+
 /* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */
 struct cp210x_gpio_write {
 	u8	mask;
@@ -1122,6 +1131,7 @@ static bool cp210x_termios_change(const struct ktermios *a, const struct ktermio
 static void cp210x_set_flow_control(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
+	struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	struct cp210x_special_chars chars;
 	struct cp210x_flow_ctl flow_ctl;
@@ -1129,6 +1139,15 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
 	u32 ctl_hs;
 	int ret;
 
+	/*
+	 * Some CP2102N interpret ulXonLimit as ulFlowReplace (erratum
+	 * CP2102N_E104). Report back that flow control is not supported.
+	 */
+	if (priv->no_flow_control) {
+		tty->termios.c_cflag &= ~CRTSCTS;
+		tty->termios.c_iflag &= ~(IXON | IXOFF);
+	}
+
 	if (old_termios &&
 			C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS) &&
 			I_IXON(tty) == (old_termios->c_iflag & IXON) &&
@@ -1185,19 +1204,20 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
 		port_priv->crtscts = false;
 	}
 
-	if (I_IXOFF(tty))
+	if (I_IXOFF(tty)) {
 		flow_repl |= CP210X_SERIAL_AUTO_RECEIVE;
-	else
+
+		flow_ctl.ulXonLimit = cpu_to_le32(128);
+		flow_ctl.ulXoffLimit = cpu_to_le32(128);
+	} else {
 		flow_repl &= ~CP210X_SERIAL_AUTO_RECEIVE;
+	}
 
 	if (I_IXON(tty))
 		flow_repl |= CP210X_SERIAL_AUTO_TRANSMIT;
 	else
 		flow_repl &= ~CP210X_SERIAL_AUTO_TRANSMIT;
 
-	flow_ctl.ulXonLimit = cpu_to_le32(128);
-	flow_ctl.ulXoffLimit = cpu_to_le32(128);
-
 	dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n", __func__,
 			ctl_hs, flow_repl);
 
@@ -1733,7 +1753,19 @@ static int cp2102n_gpioconf_init(struct usb_serial *serial)
 	priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f;
 
 	/* 0 indicates GPIO mode, 1 is alternate function */
-	priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+	if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN20) {
+		/* QFN20 is special... */
+		if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE)   /* GPIO 0 */
+			priv->gpio_altfunc |= BIT(0);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO1_RS485_MODE) /* GPIO 1 */
+			priv->gpio_altfunc |= BIT(1);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO2_TXLED_MODE) /* GPIO 2 */
+			priv->gpio_altfunc |= BIT(2);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO3_RXLED_MODE) /* GPIO 3 */
+			priv->gpio_altfunc |= BIT(3);
+	} else {
+		priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+	}
 
 	if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) {
 		/*
@@ -1908,6 +1940,45 @@ static void cp210x_init_max_speed(struct usb_serial *serial)
 	priv->use_actual_rate = use_actual_rate;
 }
 
+static int cp210x_get_fw_version(struct usb_serial *serial, u16 value)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	u8 ver[3];
+	int ret;
+
+	ret = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, value,
+			ver, sizeof(ver));
+	if (ret)
+		return ret;
+
+	dev_dbg(&serial->interface->dev, "%s - %d.%d.%d\n", __func__,
+			ver[0], ver[1], ver[2]);
+
+	priv->fw_version = ver[0] << 16 | ver[1] << 8 | ver[2];
+
+	return 0;
+}
+
+static void cp210x_determine_quirks(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	int ret;
+
+	switch (priv->partnum) {
+	case CP210X_PARTNUM_CP2102N_QFN28:
+	case CP210X_PARTNUM_CP2102N_QFN24:
+	case CP210X_PARTNUM_CP2102N_QFN20:
+		ret = cp210x_get_fw_version(serial, CP210X_GET_FW_VER_2N);
+		if (ret)
+			break;
+		if (priv->fw_version <= 0x10004)
+			priv->no_flow_control = true;
+		break;
+	default:
+		break;
+	}
+}
+
 static int cp210x_attach(struct usb_serial *serial)
 {
 	int result;
@@ -1928,6 +1999,7 @@ static int cp210x_attach(struct usb_serial *serial)
 
 	usb_set_serial_data(serial, priv);
 
+	cp210x_determine_quirks(serial);
 	cp210x_init_max_speed(serial);
 
 	result = cp210x_gpio_init(serial);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 369ef140df78..4a1f3a95d017 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -611,6 +611,7 @@ static const struct usb_device_id id_table_combined[] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index d854e04a4286..add602bebd82 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -581,6 +581,7 @@
 #define FTDI_NT_ORIONLXM_PID		0x7c90	/* OrionLXm Substation Automation Platform */
 #define FTDI_NT_ORIONLX_PLUS_PID	0x7c91	/* OrionLX+ Substation Automation Platform */
 #define FTDI_NT_ORION_IO_PID		0x7c92	/* Orion I/O */
+#define FTDI_NT_ORIONMX_PID		0x7c93	/* OrionMX */
 
 /*
  * Synapse Wireless product ids (FTDI_VID)
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 83c62f920c50..41f1b872d277 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * USB ZyXEL omni.net LCD PLUS driver
+ * USB ZyXEL omni.net driver
  *
  * Copyright (C) 2013,2017 Johan Hovold <johan@kernel.org>
  *
@@ -22,10 +22,11 @@
 #include <linux/usb/serial.h>
 
 #define DRIVER_AUTHOR "Alessandro Zummo"
-#define DRIVER_DESC "USB ZyXEL omni.net LCD PLUS Driver"
+#define DRIVER_DESC "USB ZyXEL omni.net Driver"
 
 #define ZYXEL_VENDOR_ID		0x0586
 #define ZYXEL_OMNINET_ID	0x1000
+#define ZYXEL_OMNI_56K_PLUS_ID	0x1500
 /* This one seems to be a re-branded ZyXEL device */
 #define BT_IGNITIONPRO_ID	0x2000
 
@@ -40,6 +41,7 @@ static void omninet_port_remove(struct usb_serial_port *port);
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
+	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) },
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
 	{ }						/* Terminating entry */
 };
@@ -50,7 +52,7 @@ static struct usb_serial_driver zyxel_omninet_device = {
 		.owner =	THIS_MODULE,
 		.name =		"omninet",
 	},
-	.description =		"ZyXEL - omni.net lcd plus usb",
+	.description =		"ZyXEL - omni.net usb",
 	.id_table =		id_table,
 	.num_bulk_out =		2,
 	.calc_num_ports =	omninet_calc_num_ports,
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 5f2e7f668e68..067690dac24c 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -416,7 +416,7 @@ static void qt2_close(struct usb_serial_port *port)
 
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
-			    usb_rcvctrlpipe(serial->dev, 0),
+			    usb_sndctrlpipe(serial->dev, 0),
 			    QT2_FLUSH_DEVICE, 0x40, 1,
 			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 
@@ -426,7 +426,7 @@ static void qt2_close(struct usb_serial_port *port)
 
 	/* flush the port receive buffer */
 	i = usb_control_msg(serial->dev,
-			    usb_rcvctrlpipe(serial->dev, 0),
+			    usb_sndctrlpipe(serial->dev, 0),
 			    QT2_FLUSH_DEVICE, 0x40, 0,
 			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 
@@ -639,7 +639,7 @@ static int qt2_attach(struct usb_serial *serial)
 	int status;
 
 	/* power on unit */
-	status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 0xc2, 0x40, 0x8000, 0, NULL, 0,
 				 QT2_USB_TIMEOUT);
 	if (status < 0) {
diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
index 8514bec7e1b8..77dabd306ba8 100644
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -239,7 +239,7 @@ find_mux:
 	dev = class_find_device(&typec_mux_class, NULL, fwnode,
 				mux_fwnode_match);
 
-	return dev ? to_typec_switch(dev) : ERR_PTR(-EPROBE_DEFER);
+	return dev ? to_typec_mux(dev) : ERR_PTR(-EPROBE_DEFER);
 }
 
 /**
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index 46a25b8db72e..ffa8aa12d5f1 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -582,10 +582,15 @@ static int pmc_usb_probe_iom(struct pmc_usb *pmc)
 	acpi_dev_free_resource_list(&resource_list);
 
 	if (!pmc->iom_base) {
-		put_device(&adev->dev);
+		acpi_dev_put(adev);
 		return -ENOMEM;
 	}
 
+	if (IS_ERR(pmc->iom_base)) {
+		acpi_dev_put(adev);
+		return PTR_ERR(pmc->iom_base);
+	}
+
 	pmc->iom_adev = adev;
 
 	return 0;
@@ -636,8 +641,10 @@ static int pmc_usb_probe(struct platform_device *pdev)
 			break;
 
 		ret = pmc_usb_register_port(pmc, i, fwnode);
-		if (ret)
+		if (ret) {
+			fwnode_handle_put(fwnode);
 			goto err_remove_ports;
+		}
 	}
 
 	platform_set_drvdata(pdev, pmc);
@@ -651,7 +658,7 @@ err_remove_ports:
 		usb_role_switch_unregister(pmc->port[i].usb_sw);
 	}
 
-	put_device(&pmc->iom_adev->dev);
+	acpi_dev_put(pmc->iom_adev);
 
 	return ret;
 }
@@ -667,7 +674,7 @@ static int pmc_usb_remove(struct platform_device *pdev)
 		usb_role_switch_unregister(pmc->port[i].usb_sw);
 	}
 
-	put_device(&pmc->iom_adev->dev);
+	acpi_dev_put(pmc->iom_adev);
 
 	return 0;
 }
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 9ce8c9af4da5..63470cf7f4cd 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -401,6 +401,8 @@ struct tcpm_port {
 	unsigned int nr_src_pdo;
 	u32 snk_pdo[PDO_MAX_OBJECTS];
 	unsigned int nr_snk_pdo;
+	u32 snk_vdo_v1[VDO_MAX_OBJECTS];
+	unsigned int nr_snk_vdo_v1;
 	u32 snk_vdo[VDO_MAX_OBJECTS];
 	unsigned int nr_snk_vdo;
 
@@ -1547,42 +1549,45 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev,
 			if (PD_VDO_VID(p[0]) != USB_SID_PD)
 				break;
 
-			if (PD_VDO_SVDM_VER(p[0]) < svdm_version)
+			if (PD_VDO_SVDM_VER(p[0]) < svdm_version) {
 				typec_partner_set_svdm_version(port->partner,
 							       PD_VDO_SVDM_VER(p[0]));
+				svdm_version = PD_VDO_SVDM_VER(p[0]);
+			}
 
-			tcpm_ams_start(port, DISCOVER_IDENTITY);
-			/* 6.4.4.3.1: Only respond as UFP (device) */
-			if (port->data_role == TYPEC_DEVICE &&
+			port->ams = DISCOVER_IDENTITY;
+			/*
+			 * PD2.0 Spec 6.10.3: respond with NAK as DFP (data host)
+			 * PD3.1 Spec 6.4.4.2.5.1: respond with NAK if "invalid field" or
+			 * "wrong configuation" or "Unrecognized"
+			 */
+			if ((port->data_role == TYPEC_DEVICE || svdm_version >= SVDM_VER_2_0) &&
 			    port->nr_snk_vdo) {
-				/*
-				 * Product Type DFP and Connector Type are not defined in SVDM
-				 * version 1.0 and shall be set to zero.
-				 */
-				if (typec_get_negotiated_svdm_version(typec) < SVDM_VER_2_0)
-					response[1] = port->snk_vdo[0] & ~IDH_DFP_MASK
-						      & ~IDH_CONN_MASK;
-				else
-					response[1] = port->snk_vdo[0];
-				for (i = 1; i <  port->nr_snk_vdo; i++)
-					response[i + 1] = port->snk_vdo[i];
-				rlen = port->nr_snk_vdo + 1;
+				if (svdm_version < SVDM_VER_2_0) {
+					for (i = 0; i < port->nr_snk_vdo_v1; i++)
+						response[i + 1] = port->snk_vdo_v1[i];
+					rlen = port->nr_snk_vdo_v1 + 1;
+
+				} else {
+					for (i = 0; i < port->nr_snk_vdo; i++)
+						response[i + 1] = port->snk_vdo[i];
+					rlen = port->nr_snk_vdo + 1;
+				}
 			}
 			break;
 		case CMD_DISCOVER_SVID:
-			tcpm_ams_start(port, DISCOVER_SVIDS);
+			port->ams = DISCOVER_SVIDS;
 			break;
 		case CMD_DISCOVER_MODES:
-			tcpm_ams_start(port, DISCOVER_MODES);
+			port->ams = DISCOVER_MODES;
 			break;
 		case CMD_ENTER_MODE:
-			tcpm_ams_start(port, DFP_TO_UFP_ENTER_MODE);
+			port->ams = DFP_TO_UFP_ENTER_MODE;
 			break;
 		case CMD_EXIT_MODE:
-			tcpm_ams_start(port, DFP_TO_UFP_EXIT_MODE);
+			port->ams = DFP_TO_UFP_EXIT_MODE;
 			break;
 		case CMD_ATTENTION:
-			tcpm_ams_start(port, ATTENTION);
 			/* Attention command does not have response */
 			*adev_action = ADEV_ATTENTION;
 			return 0;
@@ -1937,6 +1942,9 @@ static void vdm_run_state_machine(struct tcpm_port *port)
 			tcpm_log(port, "VDM Tx error, retry");
 			port->vdm_retries++;
 			port->vdm_state = VDM_STATE_READY;
+			if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMDT(vdo_hdr) == CMDT_INIT)
+				tcpm_ams_finish(port);
+		} else {
 			tcpm_ams_finish(port);
 		}
 		break;
@@ -2183,20 +2191,25 @@ static void tcpm_handle_alert(struct tcpm_port *port, const __le32 *payload,
 
 	if (!type) {
 		tcpm_log(port, "Alert message received with no type");
+		tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP);
 		return;
 	}
 
 	/* Just handling non-battery alerts for now */
 	if (!(type & USB_PD_ADO_TYPE_BATT_STATUS_CHANGE)) {
-		switch (port->state) {
-		case SRC_READY:
-		case SNK_READY:
+		if (port->pwr_role == TYPEC_SOURCE) {
+			port->upcoming_state = GET_STATUS_SEND;
+			tcpm_ams_start(port, GETTING_SOURCE_SINK_STATUS);
+		} else {
+			/*
+			 * Do not check SinkTxOk here in case the Source doesn't set its Rp to
+			 * SinkTxOk in time.
+			 */
+			port->ams = GETTING_SOURCE_SINK_STATUS;
 			tcpm_set_state(port, GET_STATUS_SEND, 0);
-			break;
-		default:
-			tcpm_queue_message(port, PD_MSG_CTRL_WAIT);
-			break;
 		}
+	} else {
+		tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP);
 	}
 }
 
@@ -2440,7 +2453,12 @@ static void tcpm_pd_data_request(struct tcpm_port *port,
 		tcpm_pd_handle_state(port, BIST_RX, BIST, 0);
 		break;
 	case PD_DATA_ALERT:
-		tcpm_handle_alert(port, msg->payload, cnt);
+		if (port->state != SRC_READY && port->state != SNK_READY)
+			tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ?
+					     SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET,
+					     NONE_AMS, 0);
+		else
+			tcpm_handle_alert(port, msg->payload, cnt);
 		break;
 	case PD_DATA_BATT_STATUS:
 	case PD_DATA_GET_COUNTRY_INFO:
@@ -2764,24 +2782,16 @@ static void tcpm_pd_ext_msg_request(struct tcpm_port *port,
 
 	switch (type) {
 	case PD_EXT_STATUS:
-		/*
-		 * If PPS related events raised then get PPS status to clear
-		 * (see USB PD 3.0 Spec, 6.5.2.4)
-		 */
-		if (msg->ext_msg.data[USB_PD_EXT_SDB_EVENT_FLAGS] &
-		    USB_PD_EXT_SDB_PPS_EVENTS)
-			tcpm_pd_handle_state(port, GET_PPS_STATUS_SEND,
-					     GETTING_SOURCE_SINK_STATUS, 0);
-
-		else
-			tcpm_pd_handle_state(port, ready_state(port), NONE_AMS, 0);
-		break;
 	case PD_EXT_PPS_STATUS:
-		/*
-		 * For now the PPS status message is used to clear events
-		 * and nothing more.
-		 */
-		tcpm_pd_handle_state(port, ready_state(port), NONE_AMS, 0);
+		if (port->ams == GETTING_SOURCE_SINK_STATUS) {
+			tcpm_ams_finish(port);
+			tcpm_set_state(port, ready_state(port), 0);
+		} else {
+			/* unexpected Status or PPS_Status Message */
+			tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ?
+					     SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET,
+					     NONE_AMS, 0);
+		}
 		break;
 	case PD_EXT_SOURCE_CAP_EXT:
 	case PD_EXT_GET_BATT_CAP:
@@ -5947,6 +5957,22 @@ sink:
 			return ret;
 	}
 
+	/* If sink-vdos is found, sink-vdos-v1 is expected for backward compatibility. */
+	if (port->nr_snk_vdo) {
+		ret = fwnode_property_count_u32(fwnode, "sink-vdos-v1");
+		if (ret < 0)
+			return ret;
+		else if (ret == 0)
+			return -ENODATA;
+
+		port->nr_snk_vdo_v1 = min(ret, VDO_MAX_OBJECTS);
+		ret = fwnode_property_read_u32_array(fwnode, "sink-vdos-v1",
+						     port->snk_vdo_v1,
+						     port->nr_snk_vdo_v1);
+		if (ret < 0)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -6312,6 +6338,11 @@ void tcpm_unregister_port(struct tcpm_port *port)
 {
 	int i;
 
+	hrtimer_cancel(&port->send_discover_timer);
+	hrtimer_cancel(&port->enable_frs_timer);
+	hrtimer_cancel(&port->vdm_state_machine_timer);
+	hrtimer_cancel(&port->state_machine_timer);
+
 	tcpm_reset_port(port);
 	for (i = 0; i < ARRAY_SIZE(port->port_altmode); i++)
 		typec_unregister_altmode(port->port_altmode[i]);
diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c
index 79ae63950050..5d125339687a 100644
--- a/drivers/usb/typec/tcpm/wcove.c
+++ b/drivers/usb/typec/tcpm/wcove.c
@@ -378,7 +378,7 @@ static int wcove_pd_transmit(struct tcpc_dev *tcpc,
 		const u8 *data = (void *)msg;
 		int i;
 
-		for (i = 0; i < pd_header_cnt(msg->header) * 4 + 2; i++) {
+		for (i = 0; i < pd_header_cnt_le(msg->header) * 4 + 2; i++) {
 			ret = regmap_write(wcove->regmap, USBC_TX_DATA + i,
 					   data[i]);
 			if (ret)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index b433169ef6fa..b7d104c80d85 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1253,6 +1253,7 @@ err_unregister:
 	}
 
 err_reset:
+	memset(&ucsi->cap, 0, sizeof(ucsi->cap));
 	ucsi_reset_ppm(ucsi);
 err:
 	return ret;
diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h
index fef3ef65967f..e6526b138174 100644
--- a/include/dt-bindings/usb/pd.h
+++ b/include/dt-bindings/usb/pd.h
@@ -106,6 +106,10 @@
  * <20:16>  :: Reserved, Shall be set to zero
  * <15:0>   :: USB-IF assigned VID for this cable vendor
  */
+
+/* PD Rev2.0 definition */
+#define IDH_PTYPE_UNDEF		0
+
 /* SOP Product Type (UFP) */
 #define IDH_PTYPE_NOT_UFP       0
 #define IDH_PTYPE_HUB           1
@@ -163,10 +167,10 @@
 #define UFP_VDO_VER1_2		2
 
 /* Device Capability */
-#define DEV_USB2_CAPABLE	BIT(0)
-#define DEV_USB2_BILLBOARD	BIT(1)
-#define DEV_USB3_CAPABLE	BIT(2)
-#define DEV_USB4_CAPABLE	BIT(3)
+#define DEV_USB2_CAPABLE	(1 << 0)
+#define DEV_USB2_BILLBOARD	(1 << 1)
+#define DEV_USB3_CAPABLE	(1 << 2)
+#define DEV_USB4_CAPABLE	(1 << 3)
 
 /* Connector Type */
 #define UFP_RECEPTACLE		2
@@ -191,9 +195,9 @@
 
 /* Alternate Modes */
 #define UFP_ALTMODE_NOT_SUPP	0
-#define UFP_ALTMODE_TBT3	BIT(0)
-#define UFP_ALTMODE_RECFG	BIT(1)
-#define UFP_ALTMODE_NO_RECFG	BIT(2)
+#define UFP_ALTMODE_TBT3	(1 << 0)
+#define UFP_ALTMODE_RECFG	(1 << 1)
+#define UFP_ALTMODE_NO_RECFG	(1 << 2)
 
 /* USB Highest Speed */
 #define UFP_USB2_ONLY		0
@@ -217,9 +221,9 @@
  * <4:0>   :: Port number
  */
 #define DFP_VDO_VER1_1		1
-#define HOST_USB2_CAPABLE	BIT(0)
-#define HOST_USB3_CAPABLE	BIT(1)
-#define HOST_USB4_CAPABLE	BIT(2)
+#define HOST_USB2_CAPABLE	(1 << 0)
+#define HOST_USB3_CAPABLE	(1 << 1)
+#define HOST_USB4_CAPABLE	(1 << 2)
 #define DFP_RECEPTACLE		2
 #define DFP_CAPTIVE		3
 
@@ -228,7 +232,25 @@
 	 | ((pnum) & 0x1f))
 
 /*
- * Passive Cable VDO
+ * Cable VDO (for both Passive and Active Cable VDO in PD Rev2.0)
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:20> :: Reserved, Shall be set to zero
+ * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive)
+ * <17>    :: Reserved, Shall be set to zero
+ * <16:13> :: cable latency (0001 == <10ns(~1m length))
+ * <12:11> :: cable termination type (11b == both ends active VCONN req)
+ * <10>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <9>     :: SSTX2 Directionality support
+ * <8>     :: SSRX1 Directionality support
+ * <7>     :: SSRX2 Directionality support
+ * <6:5>   :: Vbus current handling capability (01b == 3A, 10b == 5A)
+ * <4>     :: Vbus through cable (0b == no, 1b == yes)
+ * <3>     :: SOP" controller present? (0b == no, 1b == yes)
+ * <2:0>   :: USB SS Signaling support
+ *
+ * Passive Cable VDO (PD Rev3.0+)
  * ---------
  * <31:28> :: Cable HW version
  * <27:24> :: Cable FW version
@@ -244,7 +266,7 @@
  * <4:3>   :: Reserved, Shall be set to zero
  * <2:0>   :: USB highest speed
  *
- * Active Cable VDO 1
+ * Active Cable VDO 1 (PD Rev3.0+)
  * ---------
  * <31:28> :: Cable HW version
  * <27:24> :: Cable FW version
@@ -266,7 +288,9 @@
 #define CABLE_VDO_VER1_0	0
 #define CABLE_VDO_VER1_3	3
 
-/* Connector Type */
+/* Connector Type (_ATYPE and _BTYPE are for PD Rev2.0 only) */
+#define CABLE_ATYPE		0
+#define CABLE_BTYPE		1
 #define CABLE_CTYPE		2
 #define CABLE_CAPTIVE		3
 
@@ -303,12 +327,22 @@
 #define CABLE_CURR_3A		1
 #define CABLE_CURR_5A		2
 
+/* USB SuperSpeed Signaling Support (PD Rev2.0) */
+#define CABLE_USBSS_U2_ONLY	0
+#define CABLE_USBSS_U31_GEN1	1
+#define CABLE_USBSS_U31_GEN2	2
+
 /* USB Highest Speed */
 #define CABLE_USB2_ONLY		0
 #define CABLE_USB32_GEN1	1
 #define CABLE_USB32_4_GEN2	2
 #define CABLE_USB4_GEN3		3
 
+#define VDO_CABLE(hw, fw, cbl, lat, term, tx1d, tx2d, rx1d, rx2d, cur, vps, sopp, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18		\
+	 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10		\
+	 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 | ((cur) & 0x3) << 5		\
+	 | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7))
 #define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd)			\
 	(((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21		\
 	 | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11	\
@@ -374,6 +408,35 @@
 	 | (iso) << 2 | (gen))
 
 /*
+ * AMA VDO (PD Rev2.0)
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:12> :: Reserved, Shall be set to zero
+ * <11>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <10>    :: SSTX2 Directionality support
+ * <9>     :: SSRX1 Directionality support
+ * <8>     :: SSRX2 Directionality support
+ * <7:5>   :: Vconn power
+ * <4>     :: Vconn power required
+ * <3>     :: Vbus power required
+ * <2:0>   :: USB SS Signaling support
+ */
+#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24			\
+	 | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8	\
+	 | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3		\
+	 | ((usbss) & 0x7))
+
+#define PD_VDO_AMA_VCONN_REQ(vdo)	(((vdo) >> 4) & 1)
+#define PD_VDO_AMA_VBUS_REQ(vdo)	(((vdo) >> 3) & 1)
+
+#define AMA_USBSS_U2_ONLY	0
+#define AMA_USBSS_U31_GEN1	1
+#define AMA_USBSS_U31_GEN2	2
+#define AMA_USBSS_BBONLY	3
+
+/*
  * VPD VDO
  * ---------
  * <31:28> :: HW version
diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
index bf00259493e0..96b7ff66f074 100644
--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -460,7 +460,7 @@ static inline unsigned int rdo_max_power(u32 rdo)
 #define PD_T_RECEIVER_RESPONSE	15	/* 15ms max */
 #define PD_T_SOURCE_ACTIVITY	45
 #define PD_T_SINK_ACTIVITY	135
-#define PD_T_SINK_WAIT_CAP	240
+#define PD_T_SINK_WAIT_CAP	310	/* 310 - 620 ms */
 #define PD_T_PS_TRANSITION	500
 #define PD_T_SRC_TRANSITION	35
 #define PD_T_DRP_SNK		40
diff --git a/include/linux/usb/pd_ext_sdb.h b/include/linux/usb/pd_ext_sdb.h
index 0eb83ce19597..b517ebc8f0ff 100644
--- a/include/linux/usb/pd_ext_sdb.h
+++ b/include/linux/usb/pd_ext_sdb.h
@@ -24,8 +24,4 @@ enum usb_pd_ext_sdb_fields {
 #define USB_PD_EXT_SDB_EVENT_OVP		BIT(3)
 #define USB_PD_EXT_SDB_EVENT_CF_CV_MODE		BIT(4)
 
-#define USB_PD_EXT_SDB_PPS_EVENTS	(USB_PD_EXT_SDB_EVENT_OCP |	\
-					 USB_PD_EXT_SDB_EVENT_OTP |	\
-					 USB_PD_EXT_SDB_EVENT_OVP)
-
 #endif /* __LINUX_USB_PD_EXT_SDB_H */