summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorVineet Gupta <vgupta@synopsys.com>2016-04-18 10:49:56 +0530
committerVineet Gupta <vgupta@synopsys.com>2016-05-05 16:35:46 +0530
commit26f9d5fd82ca20fe536cb493ec7cf5628f8997e5 (patch)
treec41863d4e667587efb23cf46e04d013e4ac2ea33
parent2519d753676bdf2460fbbcde276d5b6ba8d6b695 (diff)
ARC: support HIGHMEM even without PAE40
Initial HIGHMEM support on ARC was introduced for PAE40 where the low memory (0x8000_0000 based) and high memory (0x1_0000_0000) were physically contiguous. So CONFIG_FLATMEM sufficed (despite a peipheral hole in the middle, which wasted a bit of struct page memory, but things worked). However w/o PAE, highmem was not possible and we could only reach ~1.75GB of DDR. Now there is a use case to access ~4GB of DDR w/o PAE40 The idea is to have low memory at canonical 0x8000_0000 and highmem at 0 so enire 4GB address space is available for physical addressing This needs additional platform/interconnect mapping to convert the non contiguous physical addresses into linear bus adresses. From Linux point of view, non contiguous divide means FLATMEM no longer works and DISCONTIGMEM is needed to track the pfns in the 2 regions. This scheme would also work for PAE40, only better in that we don't waste struct page memory for the peripheral hole. The DT description will be something like memory { ... reg = <0x80000000 0x200000000 /* 512MB: lowmem */ 0x00000000 0x10000000>; /* 256MB: highmem */ } Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-rw-r--r--arch/arc/Kconfig13
-rw-r--r--arch/arc/include/asm/mmzone.h43
-rw-r--r--arch/arc/include/asm/page.h6
-rw-r--r--arch/arc/mm/init.c54
4 files changed, 98 insertions, 18 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index ec4791ea6911..a8767430df7d 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -58,6 +58,9 @@ config GENERIC_CSUM
config RWSEM_GENERIC_SPINLOCK
def_bool y
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+
config ARCH_FLATMEM_ENABLE
def_bool y
@@ -347,6 +350,15 @@ config ARC_HUGEPAGE_16M
endchoice
+config NODES_SHIFT
+ int "Maximum NUMA Nodes (as a power of 2)"
+ default "1" if !DISCONTIGMEM
+ default "2" if DISCONTIGMEM
+ depends on NEED_MULTIPLE_NODES
+ ---help---
+ Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
+ zones.
+
if ISA_ARCOMPACT
config ARC_COMPACT_IRQ_LEVELS
@@ -455,6 +467,7 @@ config LINUX_LINK_BASE
config HIGHMEM
bool "High Memory Support"
+ select DISCONTIGMEM
help
With ARC 2G:2G address split, only upper 2G is directly addressable by
kernel. Enable this to potentially allow access to rest of 2G and PAE
diff --git a/arch/arc/include/asm/mmzone.h b/arch/arc/include/asm/mmzone.h
new file mode 100644
index 000000000000..8e97136413d9
--- /dev/null
+++ b/arch/arc/include/asm/mmzone.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_MMZONE_H
+#define _ASM_ARC_MMZONE_H
+
+#ifdef CONFIG_DISCONTIGMEM
+
+extern struct pglist_data node_data[];
+#define NODE_DATA(nid) (&node_data[nid])
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+ int is_end_low = 1;
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_PAE40))
+ is_end_low = pfn <= virt_to_pfn(0xFFFFFFFFUL);
+
+ /*
+ * node 0: lowmem: 0x8000_0000 to 0xFFFF_FFFF
+ * node 1: HIGHMEM w/o PAE40: 0x0 to 0x7FFF_FFFF
+ * HIGHMEM with PAE40: 0x1_0000_0000 to ...
+ */
+ if (pfn >= ARCH_PFN_OFFSET && is_end_low)
+ return 0;
+
+ return 1;
+}
+
+static inline int pfn_valid(unsigned long pfn)
+{
+ int nid = pfn_to_nid(pfn);
+
+ return (pfn <= node_end_pfn(nid));
+}
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 533e5a0c6ba5..0d53854884d0 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -83,7 +83,9 @@ typedef pte_t * pgtable_t;
#define ARCH_PFN_OFFSET virt_to_pfn(CONFIG_LINUX_LINK_BASE)
+#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) (((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+#endif
/*
* __pa, __va, virt_to_page (ALERT: deprecated, don't use them)
@@ -95,9 +97,7 @@ typedef pte_t * pgtable_t;
#define __pa(vaddr) ((unsigned long)(vaddr))
#define __va(paddr) ((void *)((unsigned long)(paddr)))
-#define virt_to_page(kaddr) \
- (mem_map + virt_to_pfn((kaddr) - CONFIG_LINUX_LINK_BASE))
-
+#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr))
#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr))
/* Default Permissions for stack/heaps pages (Non Executable) */
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index 5487d0b97400..8be930394750 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -30,11 +30,16 @@ static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
-static unsigned long min_high_pfn;
+static unsigned long min_high_pfn, max_high_pfn;
static u64 high_mem_start;
static u64 high_mem_sz;
#endif
+#ifdef CONFIG_DISCONTIGMEM
+struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+#endif
+
/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
static int __init setup_mem_sz(char *str)
{
@@ -109,13 +114,11 @@ void __init setup_arch_memory(void)
/* Last usable page of low mem */
max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
-#ifdef CONFIG_HIGHMEM
- min_high_pfn = PFN_DOWN(high_mem_start);
- max_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
+#ifdef CONFIG_FLATMEM
+ /* pfn_valid() uses this */
+ max_mapnr = max_low_pfn - min_low_pfn;
#endif
- max_mapnr = max_pfn - min_low_pfn;
-
/*------------- bootmem allocator setup -----------------------*/
/*
@@ -129,7 +132,7 @@ void __init setup_arch_memory(void)
* the crash
*/
- memblock_add(low_mem_start, low_mem_sz);
+ memblock_add_node(low_mem_start, low_mem_sz, 0);
memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
#ifdef CONFIG_BLK_DEV_INITRD
@@ -149,13 +152,6 @@ void __init setup_arch_memory(void)
zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
zones_holes[ZONE_NORMAL] = 0;
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
-
- /* This handles the peripheral address space hole */
- zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn;
-#endif
-
/*
* We can't use the helper free_area_init(zones[]) because it uses
* PAGE_OFFSET to compute the @min_low_pfn which would be wrong
@@ -168,6 +164,34 @@ void __init setup_arch_memory(void)
zones_holes); /* holes */
#ifdef CONFIG_HIGHMEM
+ /*
+ * Populate a new node with highmem
+ *
+ * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
+ * than addresses in normal ala low memory (0x8000_0000 based).
+ * Even with PAE, the huge peripheral space hole would waste a lot of
+ * mem with single mem_map[]. This warrants a mem_map per region design.
+ * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
+ *
+ * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
+ * populated with normal memory zone while node 1 only has highmem
+ */
+ node_set_online(1);
+
+ min_high_pfn = PFN_DOWN(high_mem_start);
+ max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
+
+ zones_size[ZONE_NORMAL] = 0;
+ zones_holes[ZONE_NORMAL] = 0;
+
+ zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
+ zones_holes[ZONE_HIGHMEM] = 0;
+
+ free_area_init_node(1, /* node-id */
+ zones_size, /* num pages per zone */
+ min_high_pfn, /* first pfn of node */
+ zones_holes); /* holes */
+
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
#endif
@@ -185,7 +209,7 @@ void __init mem_init(void)
unsigned long tmp;
reset_all_zones_managed_pages();
- for (tmp = min_high_pfn; tmp < max_pfn; tmp++)
+ for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif