Merge branch 'ioc3-eth-improvements'

Thomas Bogendoerfer says:

====================
ioc3-eth improvements

In my patch series for splitting out the serial code from ioc3-eth
by using a MFD device there was one big patch for ioc3-eth.c,
which wasn't really usefull for reviews. This series contains the
ioc3-eth changes splitted in smaller steps and few more cleanups.
Only the conversion to MFD will be done later in a different series.

Changes in v3:
- no need to check skb == NULL before passing it to dev_kfree_skb_any
- free memory allocated with get_page(s) with free_page(s)
- allocate rx ring with just GFP_KERNEL
- add required alignment for rings in comments

Changes in v2:
- use net_err_ratelimited for printing various ioc3 errors
- added missing clearing of rx buf valid flags into ioc3_alloc_rings
- use __func__ for printing out of memory messages
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 665 insertions, 748 deletions

diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h
index 25c8dccab51f..a947eed48fee 100644
--- a/arch/mips/include/asm/sn/ioc3.h
+++ b/arch/mips/include/asm/sn/ioc3.h
@@ -3,169 +3,161 @@
  * Copyright (C) 1999, 2000 Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
-#ifndef _IOC3_H
-#define _IOC3_H
+#ifndef MIPS_SN_IOC3_H
+#define MIPS_SN_IOC3_H
 
 #include <linux/types.h>
 
+/* serial port register map */
+struct ioc3_serialregs {
+	u32	sscr;
+	u32	stpir;
+	u32	stcir;
+	u32	srpir;
+	u32	srcir;
+	u32	srtr;
+	u32	shadow;
+};
+
 /* SUPERIO uart register map */
-typedef volatile struct ioc3_uartregs {
+struct ioc3_uartregs {
 	union {
-		volatile u8	rbr;	/* read only, DLAB == 0 */
-		volatile u8	thr;	/* write only, DLAB == 0 */
-		volatile u8	dll;	/* DLAB == 1 */
-	} u1;
+		u8	iu_rbr;	/* read only, DLAB == 0 */
+		u8	iu_thr;	/* write only, DLAB == 0 */
+		u8	iu_dll;	/* DLAB == 1 */
+	};
 	union {
-		volatile u8	ier;	/* DLAB == 0 */
-		volatile u8	dlm;	/* DLAB == 1 */
-	} u2;
+		u8	iu_ier;	/* DLAB == 0 */
+		u8	iu_dlm;	/* DLAB == 1 */
+	};
 	union {
-		volatile u8	iir;	/* read only */
-		volatile u8	fcr;	/* write only */
-	} u3;
-	volatile u8	    iu_lcr;
-	volatile u8	    iu_mcr;
-	volatile u8	    iu_lsr;
-	volatile u8	    iu_msr;
-	volatile u8	    iu_scr;
-} ioc3_uregs_t;
-
-#define iu_rbr u1.rbr
-#define iu_thr u1.thr
-#define iu_dll u1.dll
-#define iu_ier u2.ier
-#define iu_dlm u2.dlm
-#define iu_iir u3.iir
-#define iu_fcr u3.fcr
+		u8	iu_iir;	/* read only */
+		u8	iu_fcr;	/* write only */
+	};
+	u8	iu_lcr;
+	u8	iu_mcr;
+	u8	iu_lsr;
+	u8	iu_msr;
+	u8	iu_scr;
+};
 
 struct ioc3_sioregs {
-	volatile u8		fill[0x141];	/* starts at 0x141 */
+	u8	fill[0x141];	/* starts at 0x141 */
 
-	volatile u8		uartc;
-	volatile u8		kbdcg;
+	u8	uartc;
+	u8	kbdcg;
 
-	volatile u8		fill0[0x150 - 0x142 - 1];
+	u8	fill0[0x150 - 0x142 - 1];
 
-	volatile u8		pp_data;
-	volatile u8		pp_dsr;
-	volatile u8		pp_dcr;
+	u8	pp_data;
+	u8	pp_dsr;
+	u8	pp_dcr;
 
-	volatile u8		fill1[0x158 - 0x152 - 1];
+	u8	fill1[0x158 - 0x152 - 1];
 
-	volatile u8		pp_fifa;
-	volatile u8		pp_cfgb;
-	volatile u8		pp_ecr;
+	u8	pp_fifa;
+	u8	pp_cfgb;
+	u8	pp_ecr;
 
-	volatile u8		fill2[0x168 - 0x15a - 1];
+	u8	fill2[0x168 - 0x15a - 1];
 
-	volatile u8		rtcad;
-	volatile u8		rtcdat;
+	u8	rtcad;
+	u8	rtcdat;
 
-	volatile u8		fill3[0x170 - 0x169 - 1];
+	u8	fill3[0x170 - 0x169 - 1];
 
 	struct ioc3_uartregs	uartb;	/* 0x20170  */
 	struct ioc3_uartregs	uarta;	/* 0x20178  */
 };
 
+struct ioc3_ethregs {
+	u32	emcr;		/* 0x000f0  */
+	u32	eisr;		/* 0x000f4  */
+	u32	eier;		/* 0x000f8  */
+	u32	ercsr;		/* 0x000fc  */
+	u32	erbr_h;		/* 0x00100  */
+	u32	erbr_l;		/* 0x00104  */
+	u32	erbar;		/* 0x00108  */
+	u32	ercir;		/* 0x0010c  */
+	u32	erpir;		/* 0x00110  */
+	u32	ertr;		/* 0x00114  */
+	u32	etcsr;		/* 0x00118  */
+	u32	ersr;		/* 0x0011c  */
+	u32	etcdc;		/* 0x00120  */
+	u32	ebir;		/* 0x00124  */
+	u32	etbr_h;		/* 0x00128  */
+	u32	etbr_l;		/* 0x0012c  */
+	u32	etcir;		/* 0x00130  */
+	u32	etpir;		/* 0x00134  */
+	u32	emar_h;		/* 0x00138  */
+	u32	emar_l;		/* 0x0013c  */
+	u32	ehar_h;		/* 0x00140  */
+	u32	ehar_l;		/* 0x00144  */
+	u32	micr;		/* 0x00148  */
+	u32	midr_r;		/* 0x0014c  */
+	u32	midr_w;		/* 0x00150  */
+};
+
+struct ioc3_serioregs {
+	u32	km_csr;		/* 0x0009c  */
+	u32	k_rd;		/* 0x000a0  */
+	u32	m_rd;		/* 0x000a4  */
+	u32	k_wd;		/* 0x000a8  */
+	u32	m_wd;		/* 0x000ac  */
+};
+
 /* Register layout of IOC3 in configuration space.  */
 struct ioc3 {
-	volatile u32	pad0[7];	/* 0x00000  */
-	volatile u32	sio_ir;		/* 0x0001c  */
-	volatile u32	sio_ies;	/* 0x00020  */
-	volatile u32	sio_iec;	/* 0x00024  */
-	volatile u32	sio_cr;		/* 0x00028  */
-	volatile u32	int_out;	/* 0x0002c  */
-	volatile u32	mcr;		/* 0x00030  */
+	/* PCI Config Space registers  */
+	u32	pci_id;		/* 0x00000  */
+	u32	pci_scr;	/* 0x00004  */
+	u32	pci_rev;	/* 0x00008  */
+	u32	pci_lat;	/* 0x0000c  */
+	u32	pci_addr;	/* 0x00010  */
+	u32	pci_err_addr_l;	/* 0x00014  */
+	u32	pci_err_addr_h;	/* 0x00018  */
+
+	u32	sio_ir;		/* 0x0001c  */
+	u32	sio_ies;	/* 0x00020  */
+	u32	sio_iec;	/* 0x00024  */
+	u32	sio_cr;		/* 0x00028  */
+	u32	int_out;	/* 0x0002c  */
+	u32	mcr;		/* 0x00030  */
 
 	/* General Purpose I/O registers  */
-	volatile u32	gpcr_s;		/* 0x00034  */
-	volatile u32	gpcr_c;		/* 0x00038  */
-	volatile u32	gpdr;		/* 0x0003c  */
-	volatile u32	gppr_0;		/* 0x00040  */
-	volatile u32	gppr_1;		/* 0x00044  */
-	volatile u32	gppr_2;		/* 0x00048  */
-	volatile u32	gppr_3;		/* 0x0004c  */
-	volatile u32	gppr_4;		/* 0x00050  */
-	volatile u32	gppr_5;		/* 0x00054  */
-	volatile u32	gppr_6;		/* 0x00058  */
-	volatile u32	gppr_7;		/* 0x0005c  */
-	volatile u32	gppr_8;		/* 0x00060  */
-	volatile u32	gppr_9;		/* 0x00064  */
-	volatile u32	gppr_10;	/* 0x00068  */
-	volatile u32	gppr_11;	/* 0x0006c  */
-	volatile u32	gppr_12;	/* 0x00070  */
-	volatile u32	gppr_13;	/* 0x00074  */
-	volatile u32	gppr_14;	/* 0x00078  */
-	volatile u32	gppr_15;	/* 0x0007c  */
+	u32	gpcr_s;		/* 0x00034  */
+	u32	gpcr_c;		/* 0x00038  */
+	u32	gpdr;		/* 0x0003c  */
+	u32	gppr[16];	/* 0x00040  */
 
 	/* Parallel Port Registers  */
-	volatile u32	ppbr_h_a;	/* 0x00080  */
-	volatile u32	ppbr_l_a;	/* 0x00084  */
-	volatile u32	ppcr_a;		/* 0x00088  */
-	volatile u32	ppcr;		/* 0x0008c  */
-	volatile u32	ppbr_h_b;	/* 0x00090  */
-	volatile u32	ppbr_l_b;	/* 0x00094  */
-	volatile u32	ppcr_b;		/* 0x00098  */
+	u32	ppbr_h_a;	/* 0x00080  */
+	u32	ppbr_l_a;	/* 0x00084  */
+	u32	ppcr_a;		/* 0x00088  */
+	u32	ppcr;		/* 0x0008c  */
+	u32	ppbr_h_b;	/* 0x00090  */
+	u32	ppbr_l_b;	/* 0x00094  */
+	u32	ppcr_b;		/* 0x00098  */
 
 	/* Keyboard and Mouse Registers	 */
-	volatile u32	km_csr;		/* 0x0009c  */
-	volatile u32	k_rd;		/* 0x000a0  */
-	volatile u32	m_rd;		/* 0x000a4  */
-	volatile u32	k_wd;		/* 0x000a8  */
-	volatile u32	m_wd;		/* 0x000ac  */
+	struct ioc3_serioregs	serio;
 
 	/* Serial Port Registers  */
-	volatile u32	sbbr_h;		/* 0x000b0  */
-	volatile u32	sbbr_l;		/* 0x000b4  */
-	volatile u32	sscr_a;		/* 0x000b8  */
-	volatile u32	stpir_a;	/* 0x000bc  */
-	volatile u32	stcir_a;	/* 0x000c0  */
-	volatile u32	srpir_a;	/* 0x000c4  */
-	volatile u32	srcir_a;	/* 0x000c8  */
-	volatile u32	srtr_a;		/* 0x000cc  */
-	volatile u32	shadow_a;	/* 0x000d0  */
-	volatile u32	sscr_b;		/* 0x000d4  */
-	volatile u32	stpir_b;	/* 0x000d8  */
-	volatile u32	stcir_b;	/* 0x000dc  */
-	volatile u32	srpir_b;	/* 0x000e0  */
-	volatile u32	srcir_b;	/* 0x000e4  */
-	volatile u32	srtr_b;		/* 0x000e8  */
-	volatile u32	shadow_b;	/* 0x000ec  */
-
-	/* Ethernet Registers  */
-	volatile u32	emcr;		/* 0x000f0  */
-	volatile u32	eisr;		/* 0x000f4  */
-	volatile u32	eier;		/* 0x000f8  */
-	volatile u32	ercsr;		/* 0x000fc  */
-	volatile u32	erbr_h;		/* 0x00100  */
-	volatile u32	erbr_l;		/* 0x00104  */
-	volatile u32	erbar;		/* 0x00108  */
-	volatile u32	ercir;		/* 0x0010c  */
-	volatile u32	erpir;		/* 0x00110  */
-	volatile u32	ertr;		/* 0x00114  */
-	volatile u32	etcsr;		/* 0x00118  */
-	volatile u32	ersr;		/* 0x0011c  */
-	volatile u32	etcdc;		/* 0x00120  */
-	volatile u32	ebir;		/* 0x00124  */
-	volatile u32	etbr_h;		/* 0x00128  */
-	volatile u32	etbr_l;		/* 0x0012c  */
-	volatile u32	etcir;		/* 0x00130  */
-	volatile u32	etpir;		/* 0x00134  */
-	volatile u32	emar_h;		/* 0x00138  */
-	volatile u32	emar_l;		/* 0x0013c  */
-	volatile u32	ehar_h;		/* 0x00140  */
-	volatile u32	ehar_l;		/* 0x00144  */
-	volatile u32	micr;		/* 0x00148  */
-	volatile u32	midr_r;		/* 0x0014c  */
-	volatile u32	midr_w;		/* 0x00150  */
-	volatile u32	pad1[(0x20000 - 0x00154) / 4];
+	u32	sbbr_h;		/* 0x000b0  */
+	u32	sbbr_l;		/* 0x000b4  */
+	struct ioc3_serialregs	port_a;
+	struct ioc3_serialregs	port_b;
+
+	/* Ethernet Registers */
+	struct ioc3_ethregs	eth;
+	u32	pad1[(0x20000 - 0x00154) / 4];
 
 	/* SuperIO Registers  XXX */
 	struct ioc3_sioregs	sregs;	/* 0x20000 */
-	volatile u32	pad2[(0x40000 - 0x20180) / 4];
+	u32	pad2[(0x40000 - 0x20180) / 4];
 
 	/* SSRAM Diagnostic Access */
-	volatile u32	ssram[(0x80000 - 0x40000) / 4];
+	u32	ssram[(0x80000 - 0x40000) / 4];
 
 	/* Bytebus device offsets
 	   0x80000 -   Access to the generic devices selected with   DEV0
@@ -178,6 +170,20 @@ struct ioc3 {
 	   0xFFFFF     bytebus DEV_SEL_3  */
 };
 
+
+#define PCI_LAT			0xc		/* Latency Timer */
+#define PCI_SCR_DROP_MODE_EN	0x00008000	/* drop pios on parity err */
+#define UARTA_BASE		0x178
+#define UARTB_BASE		0x170
+
+/*
+ * Bytebus device space
+ */
+#define IOC3_BYTEBUS_DEV0	0x80000L
+#define IOC3_BYTEBUS_DEV1	0xa0000L
+#define IOC3_BYTEBUS_DEV2	0xc0000L
+#define IOC3_BYTEBUS_DEV3	0xe0000L
+
 /*
  * Ethernet RX Buffer
  */
@@ -233,28 +239,20 @@ struct ioc3_etxd {
 #define ETXD_B2CNT_MASK		0x7ff00000
 #define ETXD_B2CNT_SHIFT	20
 
-/*
- * Bytebus device space
- */
-#define IOC3_BYTEBUS_DEV0	0x80000L
-#define IOC3_BYTEBUS_DEV1	0xa0000L
-#define IOC3_BYTEBUS_DEV2	0xc0000L
-#define IOC3_BYTEBUS_DEV3	0xe0000L
-
 /* ------------------------------------------------------------------------- */
 
 /* Superio Registers (PIO Access) */
 #define IOC3_SIO_BASE		0x20000
 #define IOC3_SIO_UARTC		(IOC3_SIO_BASE+0x141)	/* UART Config */
 #define IOC3_SIO_KBDCG		(IOC3_SIO_BASE+0x142)	/* KBD Config */
-#define IOC3_SIO_PP_BASE	(IOC3_SIO_BASE+PP_BASE)		/* Parallel Port */
+#define IOC3_SIO_PP_BASE	(IOC3_SIO_BASE+PP_BASE)	/* Parallel Port */
 #define IOC3_SIO_RTC_BASE	(IOC3_SIO_BASE+0x168)	/* Real Time Clock */
 #define IOC3_SIO_UB_BASE	(IOC3_SIO_BASE+UARTB_BASE)	/* UART B */
 #define IOC3_SIO_UA_BASE	(IOC3_SIO_BASE+UARTA_BASE)	/* UART A */
 
 /* SSRAM Diagnostic Access */
 #define IOC3_SSRAM	IOC3_RAM_OFF	/* base of SSRAM diagnostic access */
-#define IOC3_SSRAM_LEN	0x40000 /* 256kb (address space size, may not be fully populated) */
+#define IOC3_SSRAM_LEN	0x40000	/* 256kb (addrspc sz, may not be populated) */
 #define IOC3_SSRAM_DM	0x0000ffff	/* data mask */
 #define IOC3_SSRAM_PM	0x00010000	/* parity mask */
 
@@ -294,10 +292,10 @@ struct ioc3_etxd {
 					   SIO_IR to assert */
 #define KM_CSR_M_TO_EN	  0x00080000	/* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause
 					   SIO_IR to assert */
-#define KM_CSR_K_CLAMP_ONE	0x00100000	/* Pull K_CLK low after rec. one char */
-#define KM_CSR_M_CLAMP_ONE	0x00200000	/* Pull M_CLK low after rec. one char */
-#define KM_CSR_K_CLAMP_THREE	0x00400000	/* Pull K_CLK low after rec. three chars */
-#define KM_CSR_M_CLAMP_THREE	0x00800000	/* Pull M_CLK low after rec. three char */
+#define KM_CSR_K_CLAMP_1  0x00100000	/* Pull K_CLK low aft recv 1 char */
+#define KM_CSR_M_CLAMP_1  0x00200000	/* Pull M_CLK low aft recv 1 char */
+#define KM_CSR_K_CLAMP_3  0x00400000	/* Pull K_CLK low aft recv 3 chars */
+#define KM_CSR_M_CLAMP_3  0x00800000	/* Pull M_CLK low aft recv 3 chars */
 
 /* bitmasks for IOC3_K_RD and IOC3_M_RD */
 #define KM_RD_DATA_2	0x000000ff	/* 3rd char recvd since last read */
@@ -440,10 +438,6 @@ struct ioc3_etxd {
 				 SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
 #define SIO_IR_RT		(SIO_IR_RT_INT | SIO_IR_GEN_INT1)
 
-/* macro to load pending interrupts */
-#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \
-				 PCI_INW(&((mem)->sio_ies_ro)))
-
 /* bitmasks for SIO_CR */
 #define SIO_CR_SIO_RESET	0x00000001	/* reset the SIO */
 #define SIO_CR_SER_A_BASE	0x000000fe	/* DMA poll addr port A */
@@ -500,10 +494,11 @@ struct ioc3_etxd {
 #define GPCR_UARTB_MODESEL	0x40	/* pin is output to port B mode sel */
 #define GPCR_UARTA_MODESEL	0x80	/* pin is output to port A mode sel */
 
-#define GPPR_PHY_RESET_PIN	5	/* GIO pin controlling phy reset */
-#define GPPR_UARTB_MODESEL_PIN	6	/* GIO pin controlling uart b mode select */
-#define GPPR_UARTA_MODESEL_PIN	7	/* GIO pin controlling uart a mode select */
+#define GPPR_PHY_RESET_PIN	5	/* GIO pin cntrlling phy reset */
+#define GPPR_UARTB_MODESEL_PIN	6	/* GIO pin cntrlling uart b mode sel */
+#define GPPR_UARTA_MODESEL_PIN	7	/* GIO pin cntrlling uart a mode sel */
 
+/* ethernet */
 #define EMCR_DUPLEX		0x00000001
 #define EMCR_PROMISC		0x00000002
 #define EMCR_PADEN		0x00000004
@@ -595,70 +590,4 @@ struct ioc3_etxd {
 
 #define MIDR_DATA_MASK		0x0000ffff
 
-#define ERXBUF_IPCKSUM_MASK	0x0000ffff
-#define ERXBUF_BYTECNT_MASK	0x07ff0000
-#define ERXBUF_BYTECNT_SHIFT	16
-#define ERXBUF_V		0x80000000
-
-#define ERXBUF_CRCERR		0x00000001	/* aka RSV15 */
-#define ERXBUF_FRAMERR		0x00000002	/* aka RSV14 */
-#define ERXBUF_CODERR		0x00000004	/* aka RSV13 */
-#define ERXBUF_INVPREAMB	0x00000008	/* aka RSV18 */
-#define ERXBUF_LOLEN		0x00007000	/* aka RSV2_0 */
-#define ERXBUF_HILEN		0x03ff0000	/* aka RSV12_3 */
-#define ERXBUF_MULTICAST	0x04000000	/* aka RSV16 */
-#define ERXBUF_BROADCAST	0x08000000	/* aka RSV17 */
-#define ERXBUF_LONGEVENT	0x10000000	/* aka RSV19 */
-#define ERXBUF_BADPKT		0x20000000	/* aka RSV20 */
-#define ERXBUF_GOODPKT		0x40000000	/* aka RSV21 */
-#define ERXBUF_CARRIER		0x80000000	/* aka RSV22 */
-
-#define ETXD_BYTECNT_MASK	0x000007ff	/* total byte count */
-#define ETXD_INTWHENDONE	0x00001000	/* intr when done */
-#define ETXD_D0V		0x00010000	/* data 0 valid */
-#define ETXD_B1V		0x00020000	/* buf 1 valid */
-#define ETXD_B2V		0x00040000	/* buf 2 valid */
-#define ETXD_DOCHECKSUM		0x00080000	/* insert ip cksum */
-#define ETXD_CHKOFF_MASK	0x07f00000	/* cksum byte offset */
-#define ETXD_CHKOFF_SHIFT	20
-
-#define ETXD_D0CNT_MASK		0x0000007f
-#define ETXD_B1CNT_MASK		0x0007ff00
-#define ETXD_B1CNT_SHIFT	8
-#define ETXD_B2CNT_MASK		0x7ff00000
-#define ETXD_B2CNT_SHIFT	20
-
-typedef enum ioc3_subdevs_e {
-    ioc3_subdev_ether,
-    ioc3_subdev_generic,
-    ioc3_subdev_nic,
-    ioc3_subdev_kbms,
-    ioc3_subdev_ttya,
-    ioc3_subdev_ttyb,
-    ioc3_subdev_ecpp,
-    ioc3_subdev_rt,
-    ioc3_nsubdevs
-} ioc3_subdev_t;
-
-/* subdevice disable bits,
- * from the standard INFO_LBL_SUBDEVS
- */
-#define IOC3_SDB_ETHER		(1<<ioc3_subdev_ether)
-#define IOC3_SDB_GENERIC	(1<<ioc3_subdev_generic)
-#define IOC3_SDB_NIC		(1<<ioc3_subdev_nic)
-#define IOC3_SDB_KBMS		(1<<ioc3_subdev_kbms)
-#define IOC3_SDB_TTYA		(1<<ioc3_subdev_ttya)
-#define IOC3_SDB_TTYB		(1<<ioc3_subdev_ttyb)
-#define IOC3_SDB_ECPP		(1<<ioc3_subdev_ecpp)
-#define IOC3_SDB_RT		(1<<ioc3_subdev_rt)
-
-#define IOC3_ALL_SUBDEVS	((1<<ioc3_nsubdevs)-1)
-
-#define IOC3_SDB_SERIAL		(IOC3_SDB_TTYA|IOC3_SDB_TTYB)
-
-#define IOC3_STD_SUBDEVS	IOC3_ALL_SUBDEVS
-
-#define IOC3_INTA_SUBDEVS	IOC3_SDB_ETHER
-#define IOC3_INTB_SUBDEVS	(IOC3_SDB_GENERIC|IOC3_SDB_KBMS|IOC3_SDB_SERIAL|IOC3_SDB_ECPP|IOC3_SDB_RT)
-
-#endif /* _IOC3_H */
+#endif /* MIPS_SN_IOC3_H */
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index 6bdb48d41276..5886bee89d06 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -35,6 +35,7 @@ void prom_putchar(char c)
 {
 	struct ioc3_uartregs *uart = console_uart();
 
-	while ((uart->iu_lsr & 0x20) == 0);
-	uart->iu_thr = c;
+	while ((readb(&uart->iu_lsr) & 0x20) == 0)
+		;
+	writeb(c, &uart->iu_thr);
 }
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 066b33f50bcc..59d5375c9021 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -130,17 +130,6 @@ cnodeid_t get_compact_nodeid(void)
 	return NASID_TO_COMPACT_NODEID(get_nasid());
 }
 
-static inline void ioc3_eth_init(void)
-{
-	struct ioc3 *ioc3;
-	nasid_t nid;
-
-	nid = get_nasid();
-	ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
-
-	ioc3->eier = 0;
-}
-
 extern void ip27_reboot_setup(void);
 
 void __init plat_mem_setup(void)
@@ -182,8 +171,6 @@ void __init plat_mem_setup(void)
 		panic("Kernel compiled for N mode.");
 #endif
 
-	ioc3_eth_init();
-
 	ioport_resource.start = 0;
 	ioport_resource.end = ~0UL;
 	set_io_port_base(IO_BASE);
diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index 358e66b81926..deb636d653f3 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -1,9 +1,5 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Driver for SGI's IOC3 based Ethernet cards as found in the PCI card.
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for SGI's IOC3 based Ethernet cards as found in the PCI card.
  *
  * Copyright (C) 1999, 2000, 01, 03, 06 Ralf Baechle
  * Copyright (C) 1995, 1999, 2000, 2001 by Silicon Graphics, Inc.
@@ -15,11 +11,8 @@
  *
  * To do:
  *
- *  o Handle allocation failures in ioc3_alloc_skb() more gracefully.
- *  o Handle allocation failures in ioc3_init_rings().
  *  o Use prefetching for large packets.  What is a good lower limit for
  *    prefetching?
- *  o We're probably allocating a bit too much memory.
  *  o Use hardware checksums.
  *  o Convert to using a IOC3 meta driver.
  *  o Which PHYs might possibly be attached to the IOC3 in real live,
@@ -39,10 +32,10 @@
 #include <linux/crc32.h>
 #include <linux/mii.h>
 #include <linux/in.h>
+#include <linux/io.h>
 #include <linux/ip.h>
 #include <linux/tcp.h>
 #include <linux/udp.h>
-#include <linux/dma-mapping.h>
 #include <linux/gfp.h>
 
 #ifdef CONFIG_SERIAL_8250
@@ -55,32 +48,52 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/skbuff.h>
+#include <linux/dma-direct.h>
+
 #include <net/ip.h>
 
 #include <asm/byteorder.h>
-#include <asm/io.h>
 #include <asm/pgtable.h>
 #include <linux/uaccess.h>
 #include <asm/sn/types.h>
 #include <asm/sn/ioc3.h>
 #include <asm/pci/bridge.h>
 
-/*
- * 64 RX buffers.  This is tunable in the range of 16 <= x < 512.  The
- * value must be a power of two.
+/* Number of RX buffers.  This is tunable in the range of 16 <= x < 512.
+ * The value must be a power of two.
  */
-#define RX_BUFFS 64
+#define RX_BUFFS		64
+#define RX_RING_ENTRIES		512		/* fixed in hardware */
+#define RX_RING_MASK		(RX_RING_ENTRIES - 1)
+#define RX_RING_SIZE		(RX_RING_ENTRIES * sizeof(u64))
+
+/* 128 TX buffers (not tunable) */
+#define TX_RING_ENTRIES		128
+#define TX_RING_MASK		(TX_RING_ENTRIES - 1)
+#define TX_RING_SIZE		(TX_RING_ENTRIES * sizeof(struct ioc3_etxd))
+
+/* IOC3 does dma transfers in 128 byte blocks */
+#define IOC3_DMA_XFER_LEN	128UL
+
+/* Every RX buffer starts with 8 byte descriptor data */
+#define RX_OFFSET		(sizeof(struct ioc3_erxbuf) + NET_IP_ALIGN)
+#define RX_BUF_SIZE		(13 * IOC3_DMA_XFER_LEN)
 
-#define ETCSR_FD	((17<<ETCSR_IPGR2_SHIFT) | (11<<ETCSR_IPGR1_SHIFT) | 21)
-#define ETCSR_HD	((21<<ETCSR_IPGR2_SHIFT) | (21<<ETCSR_IPGR1_SHIFT) | 21)
+#define ETCSR_FD   ((21 << ETCSR_IPGR2_SHIFT) | (21 << ETCSR_IPGR1_SHIFT) | 21)
+#define ETCSR_HD   ((17 << ETCSR_IPGR2_SHIFT) | (11 << ETCSR_IPGR1_SHIFT) | 21)
 
 /* Private per NIC data of the driver.  */
 struct ioc3_private {
-	struct ioc3 *regs;
+	struct ioc3_ethregs *regs;
+	struct ioc3 *all_regs;
+	struct device *dma_dev;
+	u32 *ssram;
 	unsigned long *rxr;		/* pointer to receiver ring */
 	struct ioc3_etxd *txr;
-	struct sk_buff *rx_skbs[512];
-	struct sk_buff *tx_skbs[128];
+	dma_addr_t rxr_dma;
+	dma_addr_t txr_dma;
+	struct sk_buff *rx_skbs[RX_RING_ENTRIES];
+	struct sk_buff *tx_skbs[TX_RING_ENTRIES];
 	int rx_ci;			/* RX consumer index */
 	int rx_pi;			/* RX producer index */
 	int tx_ci;			/* TX consumer index */
@@ -102,190 +115,138 @@ static void ioc3_set_multicast_list(struct net_device *dev);
 static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static void ioc3_timeout(struct net_device *dev);
 static inline unsigned int ioc3_hash(const unsigned char *addr);
+static void ioc3_start(struct ioc3_private *ip);
 static inline void ioc3_stop(struct ioc3_private *ip);
 static void ioc3_init(struct net_device *dev);
+static int ioc3_alloc_rx_bufs(struct net_device *dev);
+static void ioc3_free_rx_bufs(struct ioc3_private *ip);
+static inline void ioc3_clean_tx_ring(struct ioc3_private *ip);
 
 static const char ioc3_str[] = "IOC3 Ethernet";
 static const struct ethtool_ops ioc3_ethtool_ops;
 
-/* We use this to acquire receive skb's that we can DMA directly into. */
-
-#define IOC3_CACHELINE	128UL
 
 static inline unsigned long aligned_rx_skb_addr(unsigned long addr)
 {
-	return (~addr + 1) & (IOC3_CACHELINE - 1UL);
+	return (~addr + 1) & (IOC3_DMA_XFER_LEN - 1UL);
 }
 
-static inline struct sk_buff * ioc3_alloc_skb(unsigned long length,
-	unsigned int gfp_mask)
+static inline int ioc3_alloc_skb(struct ioc3_private *ip, struct sk_buff **skb,
+				 struct ioc3_erxbuf **rxb, dma_addr_t *rxb_dma)
 {
-	struct sk_buff *skb;
+	struct sk_buff *new_skb;
+	dma_addr_t d;
+	int offset;
+
+	new_skb = alloc_skb(RX_BUF_SIZE + IOC3_DMA_XFER_LEN - 1, GFP_ATOMIC);
+	if (!new_skb)
+		return -ENOMEM;
+
+	/* ensure buffer is aligned to IOC3_DMA_XFER_LEN */
+	offset = aligned_rx_skb_addr((unsigned long)new_skb->data);
+	if (offset)
+		skb_reserve(new_skb, offset);
 
-	skb = alloc_skb(length + IOC3_CACHELINE - 1, gfp_mask);
-	if (likely(skb)) {
-		int offset = aligned_rx_skb_addr((unsigned long) skb->data);
-		if (offset)
-			skb_reserve(skb, offset);
+	d = dma_map_single(ip->dma_dev, new_skb->data,
+			   RX_BUF_SIZE, DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(ip->dma_dev, d)) {
+		dev_kfree_skb_any(new_skb);
+		return -ENOMEM;
 	}
+	*rxb_dma = d;
+	*rxb = (struct ioc3_erxbuf *)new_skb->data;
+	skb_reserve(new_skb, RX_OFFSET);
+	*skb = new_skb;
 
-	return skb;
+	return 0;
 }
 
-static inline unsigned long ioc3_map(void *ptr, unsigned long vdev)
+#ifdef CONFIG_PCI_XTALK_BRIDGE
+static inline unsigned long ioc3_map(dma_addr_t addr, unsigned long attr)
 {
-#ifdef CONFIG_SGI_IP27
-	vdev <<= 57;   /* Shift to PCI64_ATTR_VIRTUAL */
+	return (addr & ~PCI64_ATTR_BAR) | attr;
+}
 
-	return vdev | (0xaUL << PCI64_ATTR_TARG_SHFT) | PCI64_ATTR_PREF |
-	       ((unsigned long)ptr & TO_PHYS_MASK);
+#define ERBAR_VAL	(ERBAR_BARRIER_BIT << ERBAR_RXBARR_SHIFT)
 #else
-	return virt_to_bus(ptr);
-#endif
+static inline unsigned long ioc3_map(dma_addr_t addr, unsigned long attr)
+{
+	return addr;
 }
 
-/* BEWARE: The IOC3 documentation documents the size of rx buffers as
-   1644 while it's actually 1664.  This one was nasty to track down ...  */
-#define RX_OFFSET		10
-#define RX_BUF_ALLOC_SIZE	(1664 + RX_OFFSET + IOC3_CACHELINE)
-
-/* DMA barrier to separate cached and uncached accesses.  */
-#define BARRIER()							\
-	__asm__("sync" ::: "memory")
-
+#define ERBAR_VAL	0
+#endif
 
 #define IOC3_SIZE 0x100000
 
-/*
- * IOC3 is a big endian device
- *
- * Unorthodox but makes the users of these macros more readable - the pointer
- * to the IOC3's memory mapped registers is expected as struct ioc3 * ioc3
- * in the environment.
- */
-#define ioc3_r_mcr()		be32_to_cpu(ioc3->mcr)
-#define ioc3_w_mcr(v)		do { ioc3->mcr = cpu_to_be32(v); } while (0)
-#define ioc3_w_gpcr_s(v)	do { ioc3->gpcr_s = cpu_to_be32(v); } while (0)
-#define ioc3_r_emcr()		be32_to_cpu(ioc3->emcr)
-#define ioc3_w_emcr(v)		do { ioc3->emcr = cpu_to_be32(v); } while (0)
-#define ioc3_r_eisr()		be32_to_cpu(ioc3->eisr)
-#define ioc3_w_eisr(v)		do { ioc3->eisr = cpu_to_be32(v); } while (0)
-#define ioc3_r_eier()		be32_to_cpu(ioc3->eier)
-#define ioc3_w_eier(v)		do { ioc3->eier = cpu_to_be32(v); } while (0)
-#define ioc3_r_ercsr()		be32_to_cpu(ioc3->ercsr)
-#define ioc3_w_ercsr(v)		do { ioc3->ercsr = cpu_to_be32(v); } while (0)
-#define ioc3_r_erbr_h()		be32_to_cpu(ioc3->erbr_h)
-#define ioc3_w_erbr_h(v)	do { ioc3->erbr_h = cpu_to_be32(v); } while (0)
-#define ioc3_r_erbr_l()		be32_to_cpu(ioc3->erbr_l)
-#define ioc3_w_erbr_l(v)	do { ioc3->erbr_l = cpu_to_be32(v); } while (0)
-#define ioc3_r_erbar()		be32_to_cpu(ioc3->erbar)
-#define ioc3_w_erbar(v)		do { ioc3->erbar = cpu_to_be32(v); } while (0)
-#define ioc3_r_ercir()		be32_to_cpu(ioc3->ercir)
-#define ioc3_w_ercir(v)		do { ioc3->ercir = cpu_to_be32(v); } while (0)
-#define ioc3_r_erpir()		be32_to_cpu(ioc3->erpir)
-#define ioc3_w_erpir(v)		do { ioc3->erpir = cpu_to_be32(v); } while (0)
-#define ioc3_r_ertr()		be32_to_cpu(ioc3->ertr)
-#define ioc3_w_ertr(v)		do { ioc3->ertr = cpu_to_be32(v); } while (0)
-#define ioc3_r_etcsr()		be32_to_cpu(ioc3->etcsr)
-#define ioc3_w_etcsr(v)		do { ioc3->etcsr = cpu_to_be32(v); } while (0)
-#define ioc3_r_ersr()		be32_to_cpu(ioc3->ersr)
-#define ioc3_w_ersr(v)		do { ioc3->ersr = cpu_to_be32(v); } while (0)
-#define ioc3_r_etcdc()		be32_to_cpu(ioc3->etcdc)
-#define ioc3_w_etcdc(v)		do { ioc3->etcdc = cpu_to_be32(v); } while (0)
-#define ioc3_r_ebir()		be32_to_cpu(ioc3->ebir)
-#define ioc3_w_ebir(v)		do { ioc3->ebir = cpu_to_be32(v); } while (0)
-#define ioc3_r_etbr_h()		be32_to_cpu(ioc3->etbr_h)
-#define ioc3_w_etbr_h(v)	do { ioc3->etbr_h = cpu_to_be32(v); } while (0)
-#define ioc3_r_etbr_l()		be32_to_cpu(ioc3->etbr_l)
-#define ioc3_w_etbr_l(v)	do { ioc3->etbr_l = cpu_to_be32(v); } while (0)
-#define ioc3_r_etcir()		be32_to_cpu(ioc3->etcir)
-#define ioc3_w_etcir(v)		do { ioc3->etcir = cpu_to_be32(v); } while (0)
-#define ioc3_r_etpir()		be32_to_cpu(ioc3->etpir)
-#define ioc3_w_etpir(v)		do { ioc3->etpir = cpu_to_be32(v); } while (0)
-#define ioc3_r_emar_h()		be32_to_cpu(ioc3->emar_h)
-#define ioc3_w_emar_h(v)	do { ioc3->emar_h = cpu_to_be32(v); } while (0)
-#define ioc3_r_emar_l()		be32_to_cpu(ioc3->emar_l)
-#define ioc3_w_emar_l(v)	do { ioc3->emar_l = cpu_to_be32(v); } while (0)
-#define ioc3_r_ehar_h()		be32_to_cpu(ioc3->ehar_h)
-#define ioc3_w_ehar_h(v)	do { ioc3->ehar_h = cpu_to_be32(v); } while (0)
-#define ioc3_r_ehar_l()		be32_to_cpu(ioc3->ehar_l)
-#define ioc3_w_ehar_l(v)	do { ioc3->ehar_l = cpu_to_be32(v); } while (0)
-#define ioc3_r_micr()		be32_to_cpu(ioc3->micr)
-#define ioc3_w_micr(v)		do { ioc3->micr = cpu_to_be32(v); } while (0)
-#define ioc3_r_midr_r()		be32_to_cpu(ioc3->midr_r)
-#define ioc3_w_midr_r(v)	do { ioc3->midr_r = cpu_to_be32(v); } while (0)
-#define ioc3_r_midr_w()		be32_to_cpu(ioc3->midr_w)
-#define ioc3_w_midr_w(v)	do { ioc3->midr_w = cpu_to_be32(v); } while (0)
-
 static inline u32 mcr_pack(u32 pulse, u32 sample)
 {
 	return (pulse << 10) | (sample << 2);
 }
 
-static int nic_wait(struct ioc3 *ioc3)
+static int nic_wait(u32 __iomem *mcr)
 {
-	u32 mcr;
+	u32 m;
 
-        do {
-                mcr = ioc3_r_mcr();
-        } while (!(mcr & 2));
+	do {
+		m = readl(mcr);
+	} while (!(m & 2));
 
-        return mcr & 1;
+	return m & 1;
 }
 
-static int nic_reset(struct ioc3 *ioc3)
+static int nic_reset(u32 __iomem *mcr)
 {
-        int presence;
+	int presence;
 
-	ioc3_w_mcr(mcr_pack(500, 65));
-	presence = nic_wait(ioc3);
+	writel(mcr_pack(500, 65), mcr);
+	presence = nic_wait(mcr);
 
-	ioc3_w_mcr(mcr_pack(0, 500));
-	nic_wait(ioc3);
+	writel(mcr_pack(0, 500), mcr);
+	nic_wait(mcr);
 
-        return presence;
+	return presence;
 }
 
-static inline int nic_read_bit(struct ioc3 *ioc3)
+static inline int nic_read_bit(u32 __iomem *mcr)
 {
 	int result;
 
-	ioc3_w_mcr(mcr_pack(6, 13));
-	result = nic_wait(ioc3);
-	ioc3_w_mcr(mcr_pack(0, 100));
-	nic_wait(ioc3);
+	writel(mcr_pack(6, 13), mcr);
+	result = nic_wait(mcr);
+	writel(mcr_pack(0, 100), mcr);
+	nic_wait(mcr);
 
 	return result;
 }
 
-static inline void nic_write_bit(struct ioc3 *ioc3, int bit)
+static inline void nic_write_bit(u32 __iomem *mcr, int bit)
 {
 	if (bit)
-		ioc3_w_mcr(mcr_pack(6, 110));
+		writel(mcr_pack(6, 110), mcr);
 	else
-		ioc3_w_mcr(mcr_pack(80, 30));
+		writel(mcr_pack(80, 30), mcr);
 
-	nic_wait(ioc3);
+	nic_wait(mcr);
 }
 
-/*
- * Read a byte from an iButton device
+/* Read a byte from an iButton device
  */
-static u32 nic_read_byte(struct ioc3 *ioc3)
+static u32 nic_read_byte(u32 __iomem *mcr)
 {
 	u32 result = 0;
 	int i;
 
 	for (i = 0; i < 8; i++)
-		result = (result >> 1) | (nic_read_bit(ioc3) << 7);
+		result = (result >> 1) | (nic_read_bit(mcr) << 7);
 
 	return result;
 }
 
-/*
- * Write a byte to an iButton device
+/* Write a byte to an iButton device
  */
-static void nic_write_byte(struct ioc3 *ioc3, int byte)
+static void nic_write_byte(u32 __iomem *mcr, int byte)
 {
 	int i, bit;
 
@@ -293,26 +254,26 @@ static void nic_write_byte(struct ioc3 *ioc3, int byte)
 		bit = byte & 1;
 		byte >>= 1;
 
-		nic_write_bit(ioc3, bit);
+		nic_write_bit(mcr, bit);
 	}
 }
 
-static u64 nic_find(struct ioc3 *ioc3, int *last)
+static u64 nic_find(u32 __iomem *mcr, int *last)
 {
 	int a, b, index, disc;
 	u64 address = 0;
 
-	nic_reset(ioc3);
+	nic_reset(mcr);
 	/* Search ROM.  */
-	nic_write_byte(ioc3, 0xf0);
+	nic_write_byte(mcr, 0xf0);
 
 	/* Algorithm from ``Book of iButton Standards''.  */
 	for (index = 0, disc = 0; index < 64; index++) {
-		a = nic_read_bit(ioc3);
-		b = nic_read_bit(ioc3);
+		a = nic_read_bit(mcr);
+		b = nic_read_bit(mcr);
 
 		if (a && b) {
-			printk("NIC search failed (not fatal).\n");
+			pr_warn("NIC search failed (not fatal).\n");
 			*last = 0;
 			return 0;
 		}
@@ -323,16 +284,17 @@ static u64 nic_find(struct ioc3 *ioc3, int *last)
 			} else if (index > *last) {
 				address &= ~(1UL << index);
 				disc = index;
-			} else if ((address & (1UL << index)) == 0)
+			} else if ((address & (1UL << index)) == 0) {
 				disc = index;
-			nic_write_bit(ioc3, address & (1UL << index));
+			}
+			nic_write_bit(mcr, address & (1UL << index));
 			continue;
 		} else {
 			if (a)
 				address |= 1UL << index;
 			else
 				address &= ~(1UL << index);
-			nic_write_bit(ioc3, a);
+			nic_write_bit(mcr, a);
 			continue;
 		}
 	}
@@ -342,7 +304,7 @@ static u64 nic_find(struct ioc3 *ioc3, int *last)
 	return address;
 }
 
-static int nic_init(struct ioc3 *ioc3)
+static int nic_init(u32 __iomem *mcr)
 {
 	const char *unknown = "unknown";
 	const char *type = unknown;
@@ -352,7 +314,8 @@ static int nic_init(struct ioc3 *ioc3)
 
 	while (1) {
 		u64 reg;
-		reg = nic_find(ioc3, &save);
+
+		reg = nic_find(mcr, &save);
 
 		switch (reg & 0xff) {
 		case 0x91:
@@ -366,12 +329,12 @@ static int nic_init(struct ioc3 *ioc3)
 			continue;
 		}
 
-		nic_reset(ioc3);
+		nic_reset(mcr);
 
 		/* Match ROM.  */
-		nic_write_byte(ioc3, 0x55);
+		nic_write_byte(mcr, 0x55);
 		for (i = 0; i < 8; i++)
-			nic_write_byte(ioc3, (reg >> (i << 3)) & 0xff);
+			nic_write_byte(mcr, (reg >> (i << 3)) & 0xff);
 
 		reg >>= 8; /* Shift out type.  */
 		for (i = 0; i < 6; i++) {
@@ -382,52 +345,50 @@ static int nic_init(struct ioc3 *ioc3)
 		break;
 	}
 
-	printk("Found %s NIC", type);
+	pr_info("Found %s NIC", type);
 	if (type != unknown)
-		printk (" registration number %pM, CRC %02x", serial, crc);
-	printk(".\n");
+		pr_cont(" registration number %pM, CRC %02x", serial, crc);
+	pr_cont(".\n");
 
 	return 0;
 }
 
-/*
- * Read the NIC (Number-In-a-Can) device used to store the MAC address on
+/* Read the NIC (Number-In-a-Can) device used to store the MAC address on
  * SN0 / SN00 nodeboards and PCI cards.
  */
 static void ioc3_get_eaddr_nic(struct ioc3_private *ip)
 {
-	struct ioc3 *ioc3 = ip->regs;
-	u8 nic[14];
+	u32 __iomem *mcr = &ip->all_regs->mcr;
 	int tries = 2; /* There may be some problem with the battery?  */
+	u8 nic[14];
 	int i;
 
-	ioc3_w_gpcr_s(1 << 21);
+	writel(1 << 21, &ip->all_regs->gpcr_s);
 
 	while (tries--) {
-		if (!nic_init(ioc3))
+		if (!nic_init(mcr))
 			break;
 		udelay(500);
 	}
 
 	if (tries < 0) {
-		printk("Failed to read MAC address\n");
+		pr_err("Failed to read MAC address\n");
 		return;
 	}
 
 	/* Read Memory.  */
-	nic_write_byte(ioc3, 0xf0);
-	nic_write_byte(ioc3, 0x00);
-	nic_write_byte(ioc3, 0x00);
+	nic_write_byte(mcr, 0xf0);
+	nic_write_byte(mcr, 0x00);
+	nic_write_byte(mcr, 0x00);
 
 	for (i = 13; i >= 0; i--)
-		nic[i] = nic_read_byte(ioc3);
+		nic[i] = nic_read_byte(mcr);
 
 	for (i = 2; i < 8; i++)
 		ip->dev->dev_addr[i - 2] = nic[i];
 }
 
-/*
- * Ok, this is hosed by design.  It's necessary to know what machine the
+/* Ok, this is hosed by design.  It's necessary to know what machine the
  * NIC is in in order to know how to read the NIC address.  We also have
  * to know if it's a PCI card or a NIC in on the node board ...
  */
@@ -435,17 +396,21 @@ static void ioc3_get_eaddr(struct ioc3_private *ip)
 {
 	ioc3_get_eaddr_nic(ip);
 
-	printk("Ethernet address is %pM.\n", ip->dev->dev_addr);
+	pr_info("Ethernet address is %pM.\n", ip->dev->dev_addr);
 }
 
 static void __ioc3_set_mac_address(struct net_device *dev)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
-	struct ioc3 *ioc3 = ip->regs;
 
-	ioc3_w_emar_h((dev->dev_addr[5] <<  8) | dev->dev_addr[4]);
-	ioc3_w_emar_l((dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) |
-	              (dev->dev_addr[1] <<  8) | dev->dev_addr[0]);
+	writel((dev->dev_addr[5] <<  8) |
+	       dev->dev_addr[4],
+	       &ip->regs->emar_h);
+	writel((dev->dev_addr[3] << 24) |
+	       (dev->dev_addr[2] << 16) |
+	       (dev->dev_addr[1] <<  8) |
+	       dev->dev_addr[0],
+	       &ip->regs->emar_l);
 }
 
 static int ioc3_set_mac_address(struct net_device *dev, void *addr)
@@ -462,31 +427,35 @@ static int ioc3_set_mac_address(struct net_device *dev, void *addr)
 	return 0;
 }
 
-/*
- * Caller must hold the ioc3_lock ever for MII readers.  This is also
+/* Caller must hold the ioc3_lock ever for MII readers.  This is also
  * used to protect the transmitter side but it's low contention.
  */
 static int ioc3_mdio_read(struct net_device *dev, int phy, int reg)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
-	struct ioc3 *ioc3 = ip->regs;
+	struct ioc3_ethregs *regs = ip->regs;
 
-	while (ioc3_r_micr() & MICR_BUSY);
-	ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG);
-	while (ioc3_r_micr() & MICR_BUSY);
+	while (readl(&regs->micr) & MICR_BUSY)
+		;
+	writel((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG,
+	       &regs->micr);
+	while (readl(&regs->micr) & MICR_BUSY)
+		;
 
-	return ioc3_r_midr_r() & MIDR_DATA_MASK;
+	return readl(&regs->midr_r) & MIDR_DATA_MASK;
 }
 
 static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
-	struct ioc3 *ioc3 = ip->regs;
-
-	while (ioc3_r_micr() & MICR_BUSY);
-	ioc3_w_midr_w(data);
-	ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg);
-	while (ioc3_r_micr() & MICR_BUSY);
+	struct ioc3_ethregs *regs = ip->regs;
+
+	while (readl(&regs->micr) & MICR_BUSY)
+		;
+	writel(data, &regs->midr_w);
+	writel((phy << MICR_PHYADDR_SHIFT) | reg, &regs->micr);
+	while (readl(&regs->micr) & MICR_BUSY)
+		;
 }
 
 static int ioc3_mii_init(struct ioc3_private *ip);
@@ -494,23 +463,22 @@ static int ioc3_mii_init(struct ioc3_private *ip);
 static struct net_device_stats *ioc3_get_stats(struct net_device *dev)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
-	struct ioc3 *ioc3 = ip->regs;
+	struct ioc3_ethregs *regs = ip->regs;
 
-	dev->stats.collisions += (ioc3_r_etcdc() & ETCDC_COLLCNT_MASK);
+	dev->stats.collisions += readl(&regs->etcdc) & ETCDC_COLLCNT_MASK;
 	return &dev->stats;
 }
 
-static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len)
+static void ioc3_tcpudp_checksum(struct sk_buff *skb, u32 hwsum, int len)
 {
 	struct ethhdr *eh = eth_hdr(skb);
-	uint32_t csum, ehsum;
 	unsigned int proto;
-	struct iphdr *ih;
-	uint16_t *ew;
 	unsigned char *cp;
+	struct iphdr *ih;
+	u32 csum, ehsum;
+	u16 *ew;
 
-	/*
-	 * Did hardware handle the checksum at all?  The cases we can handle
+	/* Did hardware handle the checksum at all?  The cases we can handle
 	 * are:
 	 *
 	 * - TCP and UDP checksums of IPv4 only.
@@ -526,7 +494,7 @@ static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len)
 	if (eh->h_proto != htons(ETH_P_IP))
 		return;
 
-	ih = (struct iphdr *) ((char *)eh + ETH_HLEN);
+	ih = (struct iphdr *)((char *)eh + ETH_HLEN);
 	if (ip_is_fragment(ih))
 		return;
 
@@ -537,12 +505,12 @@ static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len)
 	/* Same as tx - compute csum of pseudo header  */
 	csum = hwsum +
 	       (ih->tot_len - (ih->ihl << 2)) +
-	       htons((uint16_t)ih->protocol) +
+	       htons((u16)ih->protocol) +
 	       (ih->saddr >> 16) + (ih->saddr & 0xffff) +
 	       (ih->daddr >> 16) + (ih->daddr & 0xffff);
 
 	/* Sum up ethernet dest addr, src addr and protocol  */
-	ew = (uint16_t *) eh;
+	ew = (u16 *)eh;
 	ehsum = ew[0] + ew[1] + ew[2] + ew[3] + ew[4] + ew[5] + ew[6];
 
 	ehsum = (ehsum & 0xffff) + (ehsum >> 16);
@@ -551,14 +519,15 @@ static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len)
 	csum += 0xffff ^ ehsum;
 
 	/* In the next step we also subtract the 1's complement
-	   checksum of the trailing ethernet CRC.  */
+	 * checksum of the trailing ethernet CRC.
+	 */
 	cp = (char *)eh + len;	/* points at trailing CRC */
 	if (len & 1) {
-		csum += 0xffff ^ (uint16_t) ((cp[1] << 8) | cp[0]);
-		csum += 0xffff ^ (uint16_t) ((cp[3] << 8) | cp[2]);
+		csum += 0xffff ^ (u16)((cp[1] << 8) | cp[0]);
+		csum += 0xffff ^ (u16)((cp[3] << 8) | cp[2]);
 	} else {
-		csum += 0xffff ^ (uint16_t) ((cp[0] << 8) | cp[1]);
-		csum += 0xffff ^ (uint16_t) ((cp[2] << 8) | cp[3]);
+		csum += 0xffff ^ (u16)((cp[0] << 8) | cp[1]);
+		csum += 0xffff ^ (u16)((cp[2] << 8) | cp[3]);
 	}
 
 	csum = (csum & 0xffff) + (csum >> 16);
@@ -572,10 +541,10 @@ static inline void ioc3_rx(struct net_device *dev)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
 	struct sk_buff *skb, *new_skb;
-	struct ioc3 *ioc3 = ip->regs;
 	int rx_entry, n_entry, len;
 	struct ioc3_erxbuf *rxb;
 	unsigned long *rxr;
+	dma_addr_t d;
 	u32 w0, err;
 
 	rxr = ip->rxr;		/* Ring base */
@@ -583,64 +552,67 @@ static inline void ioc3_rx(struct net_device *dev)
 	n_entry = ip->rx_pi;
 
 	skb = ip->rx_skbs[rx_entry];
-	rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
+	rxb = (struct ioc3_erxbuf *)(skb->data - RX_OFFSET);
 	w0 = be32_to_cpu(rxb->w0);
 
 	while (w0 & ERXBUF_V) {
 		err = be32_to_cpu(rxb->err);		/* It's valid ...  */
 		if (err & ERXBUF_GOODPKT) {
 			len = ((w0 >> ERXBUF_BYTECNT_SHIFT) & 0x7ff) - 4;
-			skb_trim(skb, len);
+			skb_put(skb, len);
 			skb->protocol = eth_type_trans(skb, dev);
 
-			new_skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC);
-			if (!new_skb) {
+			if (ioc3_alloc_skb(ip, &new_skb, &rxb, &d)) {
 				/* Ouch, drop packet and just recycle packet
-				   to keep the ring filled.  */
+				 * to keep the ring filled.
+				 */
 				dev->stats.rx_dropped++;
 				new_skb = skb;
+				d = rxr[rx_entry];
 				goto next;
 			}
 
 			if (likely(dev->features & NETIF_F_RXCSUM))
 				ioc3_tcpudp_checksum(skb,
-					w0 & ERXBUF_IPCKSUM_MASK, len);
+						     w0 & ERXBUF_IPCKSUM_MASK,
+						     len);
+
+			dma_unmap_single(ip->dma_dev, rxr[rx_entry],
+					 RX_BUF_SIZE, DMA_FROM_DEVICE);
 
 			netif_rx(skb);
 
 			ip->rx_skbs[rx_entry] = NULL;	/* Poison  */
 
-			/* Because we reserve afterwards. */
-			skb_put(new_skb, (1664 + RX_OFFSET));
-			rxb = (struct ioc3_erxbuf *) new_skb->data;
-			skb_reserve(new_skb, RX_OFFSET);
-
 			dev->stats.rx_packets++;		/* Statistics */
 			dev->stats.rx_bytes += len;
 		} else {
 			/* The frame is invalid and the skb never
-			   reached the network layer so we can just
-			   recycle it.  */
+			 * reached the network layer so we can just
+			 * recycle it.
+			 */
 			new_skb = skb;
+			d = rxr[rx_entry];
 			dev->stats.rx_errors++;
 		}
 		if (err & ERXBUF_CRCERR)	/* Statistics */
 			dev->stats.rx_crc_errors++;
 		if (err & ERXBUF_FRAMERR)
 			dev->stats.rx_frame_errors++;
+
 next:
 		ip->rx_skbs[n_entry] = new_skb;
-		rxr[n_entry] = cpu_to_be64(ioc3_map(rxb, 1));
+		rxr[n_entry] = cpu_to_be64(ioc3_map(d, PCI64_ATTR_BAR));
 		rxb->w0 = 0;				/* Clear valid flag */
-		n_entry = (n_entry + 1) & 511;		/* Update erpir */
+		n_entry = (n_entry + 1) & RX_RING_MASK;	/* Update erpir */
 
 		/* Now go on to the next ring entry.  */
-		rx_entry = (rx_entry + 1) & 511;
+		rx_entry = (rx_entry + 1) & RX_RING_MASK;
 		skb = ip->rx_skbs[rx_entry];
-		rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
+		rxb = (struct ioc3_erxbuf *)(skb->data - RX_OFFSET);
 		w0 = be32_to_cpu(rxb->w0);
 	}
-	ioc3_w_erpir((n_entry << 3) | ERPIR_ARM);
+	writel((n_entry << 3) | ERPIR_ARM, &ip->regs->erpir);
 	ip->rx_pi = n_entry;
 	ip->rx_ci = rx_entry;
 }
@@ -648,16 +620,16 @@ next:
 static inline void ioc3_tx(struct net_device *dev)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
+	struct ioc3_ethregs *regs = ip->regs;
 	unsigned long packets, bytes;
-	struct ioc3 *ioc3 = ip->regs;
 	int tx_entry, o_entry;
 	struct sk_buff *skb;
 	u32 etcir;
 
 	spin_lock(&ip->ioc3_lock);
-	etcir = ioc3_r_etcir();
+	etcir = readl(&regs->etcir);
 
-	tx_entry = (etcir >> 7) & 127;
+	tx_entry = (etcir >> 7) & TX_RING_MASK;
 	o_entry = ip->tx_ci;
 	packets = 0;
 	bytes = 0;
@@ -669,25 +641,24 @@ static inline void ioc3_tx(struct net_device *dev)
 		dev_consume_skb_irq(skb);
 		ip->tx_skbs[o_entry] = NULL;
 
-		o_entry = (o_entry + 1) & 127;		/* Next */
+		o_entry = (o_entry + 1) & TX_RING_MASK;	/* Next */
 
-		etcir = ioc3_r_etcir();			/* More pkts sent?  */
-		tx_entry = (etcir >> 7) & 127;
+		etcir = readl(&regs->etcir);		/* More pkts sent?  */
+		tx_entry = (etcir >> 7) & TX_RING_MASK;
 	}
 
 	dev->stats.tx_packets += packets;
 	dev->stats.tx_bytes += bytes;
 	ip->txqlen -= packets;
 
-	if (ip->txqlen < 128)
+	if (netif_queue_stopped(dev) && ip->txqlen < TX_RING_ENTRIES)
 		netif_wake_queue(dev);
 
 	ip->tx_ci = o_entry;
 	spin_unlock(&ip->ioc3_lock);
 }
 
-/*
- * Deal with fatal IOC3 errors.  This condition might be caused by a hard or
+/* Deal with fatal IOC3 errors.  This condition might be caused by a hard or
  * software problems, so we should try to recover
  * more gracefully if this ever happens.  In theory we might be flooded
  * with such error interrupts if something really goes wrong, so we might
@@ -696,25 +667,33 @@ static inline void ioc3_tx(struct net_device *dev)
 static void ioc3_error(struct net_device *dev, u32 eisr)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
-	unsigned char *iface = dev->name;
 
 	spin_lock(&ip->ioc3_lock);
 
 	if (eisr & EISR_RXOFLO)
-		printk(KERN_ERR "%s: RX overflow.\n", iface);
+		net_err_ratelimited("%s: RX overflow.\n", dev->name);
 	if (eisr & EISR_RXBUFOFLO)
-		printk(KERN_ERR "%s: RX buffer overflow.\n", iface);
+		net_err_ratelimited("%s: RX buffer overflow.\n", dev->name);
 	if (eisr & EISR_RXMEMERR)
-		printk(KERN_ERR "%s: RX PCI error.\n", iface);
+		net_err_ratelimited("%s: RX PCI error.\n", dev->name);
 	if (eisr & EISR_RXPARERR)
-		printk(KERN_ERR "%s: RX SSRAM parity error.\n", iface);
+		net_err_ratelimited("%s: RX SSRAM parity error.\n", dev->name);
 	if (eisr & EISR_TXBUFUFLO)
-		printk(KERN_ERR "%s: TX buffer underflow.\n", iface);
+		net_err_ratelimited("%s: TX buffer underflow.\n", dev->name);
 	if (eisr & EISR_TXMEMERR)
-		printk(KERN_ERR "%s: TX PCI error.\n", iface);
+		net_err_ratelimited("%s: TX PCI error.\n", dev->name);
 
 	ioc3_stop(ip);
+	ioc3_free_rx_bufs(ip);
+	ioc3_clean_tx_ring(ip);
+
 	ioc3_init(dev);
+	if (ioc3_alloc_rx_bufs(dev)) {
+		netdev_err(dev, "%s: rx buffer allocation failed\n", __func__);
+		spin_unlock(&ip->ioc3_lock);
+		return;
+	}
+	ioc3_start(ip);
 	ioc3_mii_init(ip);
 
 	netif_wake_queue(dev);
@@ -723,45 +702,45 @@ static void ioc3_error(struct net_device *dev, u32 eisr)
 }
 
 /* The interrupt handler does all of the Rx thread work and cleans up
-   after the Tx thread.  */
-static irqreturn_t ioc3_interrupt(int irq, void *_dev)
+ * after the Tx thread.
+ */
+static irqreturn_t ioc3_interrupt(int irq, void *dev_id)
 {
-	struct net_device *dev = (struct net_device *)_dev;
-	struct ioc3_private *ip = netdev_priv(dev);
-	struct ioc3 *ioc3 = ip->regs;
-	const u32 enabled = EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO |
-	                    EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO |
-	                    EISR_TXEXPLICIT | EISR_TXMEMERR;
+	struct ioc3_private *ip = netdev_priv(dev_id);
+	struct ioc3_ethregs *regs = ip->regs;
 	u32 eisr;
 
-	eisr = ioc3_r_eisr() & enabled;
-
-	ioc3_w_eisr(eisr);
-	(void) ioc3_r_eisr();				/* Flush */
+	eisr = readl(&regs->eisr);
+	writel(eisr, &regs->eisr);
+	readl(&regs->eisr);				/* Flush */
 
 	if (eisr & (EISR_RXOFLO | EISR_RXBUFOFLO | EISR_RXMEMERR |
-	            EISR_RXPARERR | EISR_TXBUFUFLO | EISR_TXMEMERR))
-		ioc3_error(dev, eisr);
+		    EISR_RXPARERR | EISR_TXBUFUFLO | EISR_TXMEMERR))
+		ioc3_error(dev_id, eisr);
 	if (eisr & EISR_RXTIMERINT)
-		ioc3_rx(dev);
+		ioc3_rx(dev_id);
 	if (eisr & EISR_TXEXPLICIT)
-		ioc3_tx(dev);
+		ioc3_tx(dev_id);
 
 	return IRQ_HANDLED;
 }
 
 static inline void ioc3_setup_duplex(struct ioc3_private *ip)
 {
-	struct ioc3 *ioc3 = ip->regs;
+	struct ioc3_ethregs *regs = ip->regs;
+
+	spin_lock_irq(&ip->ioc3_lock);
 
 	if (ip->mii.full_duplex) {
-		ioc3_w_etcsr(ETCSR_FD);
+		writel(ETCSR_FD, &regs->etcsr);
 		ip->emcr |= EMCR_DUPLEX;
 	} else {
-		ioc3_w_etcsr(ETCSR_HD);
+		writel(ETCSR_HD, &regs->etcsr);
 		ip->emcr &= ~EMCR_DUPLEX;
 	}
-	ioc3_w_emcr(ip->emcr);
+	writel(ip->emcr, &regs->emcr);
+
+	spin_unlock_irq(&ip->ioc3_lock);
 }
 
 static void ioc3_timer(struct timer_list *t)
@@ -772,12 +751,11 @@ static void ioc3_timer(struct timer_list *t)
 	mii_check_media(&ip->mii, 1, 0);
 	ioc3_setup_duplex(ip);
 
-	ip->ioc3_timer.expires = jiffies + ((12 * HZ)/10); /* 1.2s */
+	ip->ioc3_timer.expires = jiffies + ((12 * HZ) / 10); /* 1.2s */
 	add_timer(&ip->ioc3_timer);
 }
 
-/*
- * Try to find a PHY.  There is no apparent relation between the MII addresses
+/* Try to find a PHY.  There is no apparent relation between the MII addresses
  * in the SGI documentation and what we find in reality, so we simply probe
  * for the PHY.  It seems IOC3 PHYs usually live on address 31.  One of my
  * onboard IOC3s has the special oddity that probing doesn't seem to find it
@@ -786,8 +764,8 @@ static void ioc3_timer(struct timer_list *t)
  */
 static int ioc3_mii_init(struct ioc3_private *ip)
 {
-	int i, found = 0, res = 0;
 	int ioc3_phy_workaround = 1;
+	int i, found = 0, res = 0;
 	u16 word;
 
 	for (i = 0; i < 32; i++) {
@@ -800,9 +778,9 @@ static int ioc3_mii_init(struct ioc3_private *ip)
 	}
 
 	if (!found) {
-		if (ioc3_phy_workaround)
+		if (ioc3_phy_workaround) {
 			i = 31;
-		else {
+		} else {
 			ip->mii.phy_id = -1;
 			res = -ENODEV;
 			goto out;
@@ -817,27 +795,27 @@ out:
 
 static void ioc3_mii_start(struct ioc3_private *ip)
 {
-	ip->ioc3_timer.expires = jiffies + (12 * HZ)/10;  /* 1.2 sec. */
+	ip->ioc3_timer.expires = jiffies + (12 * HZ) / 10;  /* 1.2 sec. */
 	add_timer(&ip->ioc3_timer);
 }
 
-static inline void ioc3_clean_rx_ring(struct ioc3_private *ip)
+static inline void ioc3_tx_unmap(struct ioc3_private *ip, int entry)
 {
-	struct sk_buff *skb;
-	int i;
-
-	for (i = ip->rx_ci; i & 15; i++) {
-		ip->rx_skbs[ip->rx_pi] = ip->rx_skbs[ip->rx_ci];
-		ip->rxr[ip->rx_pi++] = ip->rxr[ip->rx_ci++];
+	struct ioc3_etxd *desc;
+	u32 cmd, bufcnt, len;
+
+	desc = &ip->txr[entry];
+	cmd = be32_to_cpu(desc->cmd);
+	bufcnt = be32_to_cpu(desc->bufcnt);
+	if (cmd & ETXD_B1V) {
+		len = (bufcnt & ETXD_B1CNT_MASK) >> ETXD_B1CNT_SHIFT;
+		dma_unmap_single(ip->dma_dev, be64_to_cpu(desc->p1),
+				 len, DMA_TO_DEVICE);
 	}
-	ip->rx_pi &= 511;
-	ip->rx_ci &= 511;
-
-	for (i = ip->rx_ci; i != ip->rx_pi; i = (i+1) & 511) {
-		struct ioc3_erxbuf *rxb;
-		skb = ip->rx_skbs[i];
-		rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
-		rxb->w0 = 0;
+	if (cmd & ETXD_B2V) {
+		len = (bufcnt & ETXD_B2CNT_MASK) >> ETXD_B2CNT_SHIFT;
+		dma_unmap_single(ip->dma_dev, be64_to_cpu(desc->p2),
+				 len, DMA_TO_DEVICE);
 	}
 }
 
@@ -846,9 +824,10 @@ static inline void ioc3_clean_tx_ring(struct ioc3_private *ip)
 	struct sk_buff *skb;
 	int i;
 
-	for (i=0; i < 128; i++) {
+	for (i = 0; i < TX_RING_ENTRIES; i++) {
 		skb = ip->tx_skbs[i];
 		if (skb) {
+			ioc3_tx_unmap(ip, i);
 			ip->tx_skbs[i] = NULL;
 			dev_kfree_skb_any(skb);
 		}
@@ -858,179 +837,137 @@ static inline void ioc3_clean_tx_ring(struct ioc3_private *ip)
 	ip->tx_ci = 0;
 }
 
-static void ioc3_free_rings(struct ioc3_private *ip)
+static void ioc3_free_rx_bufs(struct ioc3_private *ip)
 {
-	struct sk_buff *skb;
 	int rx_entry, n_entry;
+	struct sk_buff *skb;
 
-	if (ip->txr) {
-		ioc3_clean_tx_ring(ip);
-		free_pages((unsigned long)ip->txr, 2);
-		ip->txr = NULL;
-	}
-
-	if (ip->rxr) {
-		n_entry = ip->rx_ci;
-		rx_entry = ip->rx_pi;
-
-		while (n_entry != rx_entry) {
-			skb = ip->rx_skbs[n_entry];
-			if (skb)
-				dev_kfree_skb_any(skb);
+	n_entry = ip->rx_ci;
+	rx_entry = ip->rx_pi;
 
-			n_entry = (n_entry + 1) & 511;
+	while (n_entry != rx_entry) {
+		skb = ip->rx_skbs[n_entry];
+		if (skb) {
+			dma_unmap_single(ip->dma_dev,
+					 be64_to_cpu(ip->rxr[n_entry]),
+					 RX_BUF_SIZE, DMA_FROM_DEVICE);
+			dev_kfree_skb_any(skb);
 		}
-		free_page((unsigned long)ip->rxr);
-		ip->rxr = NULL;
+		n_entry = (n_entry + 1) & RX_RING_MASK;
 	}
 }
 
-static void ioc3_alloc_rings(struct net_device *dev)
+static int ioc3_alloc_rx_bufs(struct net_device *dev)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
 	struct ioc3_erxbuf *rxb;
-	unsigned long *rxr;
+	dma_addr_t d;
 	int i;
 
-	if (ip->rxr == NULL) {
-		/* Allocate and initialize rx ring.  4kb = 512 entries  */
-		ip->rxr = (unsigned long *) get_zeroed_page(GFP_ATOMIC);
-		rxr = ip->rxr;
-		if (!rxr)
-			printk("ioc3_alloc_rings(): get_zeroed_page() failed!\n");
-
-		/* Now the rx buffers.  The RX ring may be larger but
-		   we only allocate 16 buffers for now.  Need to tune
-		   this for performance and memory later.  */
-		for (i = 0; i < RX_BUFFS; i++) {
-			struct sk_buff *skb;
-
-			skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC);
-			if (!skb) {
-				show_free_areas(0, NULL);
-				continue;
-			}
-
-			ip->rx_skbs[i] = skb;
-
-			/* Because we reserve afterwards. */
-			skb_put(skb, (1664 + RX_OFFSET));
-			rxb = (struct ioc3_erxbuf *) skb->data;
-			rxr[i] = cpu_to_be64(ioc3_map(rxb, 1));
-			skb_reserve(skb, RX_OFFSET);
-		}
-		ip->rx_ci = 0;
-		ip->rx_pi = RX_BUFFS;
-	}
+	/* Now the rx buffers.  The RX ring may be larger but
+	 * we only allocate 16 buffers for now.  Need to tune
+	 * this for performance and memory later.
+	 */
+	for (i = 0; i < RX_BUFFS; i++) {
+		if (ioc3_alloc_skb(ip, &ip->rx_skbs[i], &rxb, &d))
+			return -ENOMEM;
 
-	if (ip->txr == NULL) {
-		/* Allocate and initialize tx rings.  16kb = 128 bufs.  */
-		ip->txr = (struct ioc3_etxd *)__get_free_pages(GFP_KERNEL, 2);
-		if (!ip->txr)
-			printk("ioc3_alloc_rings(): __get_free_pages() failed!\n");
-		ip->tx_pi = 0;
-		ip->tx_ci = 0;
+		rxb->w0 = 0;	/* Clear valid flag */
+		ip->rxr[i] = cpu_to_be64(ioc3_map(d, PCI64_ATTR_BAR));
 	}
-}
-
-static void ioc3_init_rings(struct net_device *dev)
-{
-	struct ioc3_private *ip = netdev_priv(dev);
-	struct ioc3 *ioc3 = ip->regs;
-	unsigned long ring;
-
-	ioc3_free_rings(ip);
-	ioc3_alloc_rings(dev);
-
-	ioc3_clean_rx_ring(ip);
-	ioc3_clean_tx_ring(ip);
+	ip->rx_ci = 0;
+	ip->rx_pi = RX_BUFFS;
 
-	/* Now the rx ring base, consume & produce registers.  */
-	ring = ioc3_map(ip->rxr, 0);
-	ioc3_w_erbr_h(ring >> 32);
-	ioc3_w_erbr_l(ring & 0xffffffff);
-	ioc3_w_ercir(ip->rx_ci << 3);
-	ioc3_w_erpir((ip->rx_pi << 3) | ERPIR_ARM);
-
-	ring = ioc3_map(ip->txr, 0);
-
-	ip->txqlen = 0;					/* nothing queued  */
-
-	/* Now the tx ring base, consume & produce registers.  */
-	ioc3_w_etbr_h(ring >> 32);
-	ioc3_w_etbr_l(ring & 0xffffffff);
-	ioc3_w_etpir(ip->tx_pi << 7);
-	ioc3_w_etcir(ip->tx_ci << 7);
-	(void) ioc3_r_etcir();				/* Flush */
+	return 0;
 }
 
 static inline void ioc3_ssram_disc(struct ioc3_private *ip)
 {
-	struct ioc3 *ioc3 = ip->regs;
-	volatile u32 *ssram0 = &ioc3->ssram[0x0000];
-	volatile u32 *ssram1 = &ioc3->ssram[0x4000];
-	unsigned int pattern = 0x5555;
+	struct ioc3_ethregs *regs = ip->regs;
+	u32 *ssram0 = &ip->ssram[0x0000];
+	u32 *ssram1 = &ip->ssram[0x4000];
+	u32 pattern = 0x5555;
 
 	/* Assume the larger size SSRAM and enable parity checking */
-	ioc3_w_emcr(ioc3_r_emcr() | (EMCR_BUFSIZ | EMCR_RAMPAR));
+	writel(readl(&regs->emcr) | (EMCR_BUFSIZ | EMCR_RAMPAR), &regs->emcr);
+	readl(&regs->emcr); /* Flush */
 
-	*ssram0 = pattern;
-	*ssram1 = ~pattern & IOC3_SSRAM_DM;
+	writel(pattern, ssram0);
+	writel(~pattern & IOC3_SSRAM_DM, ssram1);
 
-	if ((*ssram0 & IOC3_SSRAM_DM) != pattern ||
-	    (*ssram1 & IOC3_SSRAM_DM) != (~pattern & IOC3_SSRAM_DM)) {
+	if ((readl(ssram0) & IOC3_SSRAM_DM) != pattern ||
+	    (readl(ssram1) & IOC3_SSRAM_DM) != (~pattern & IOC3_SSRAM_DM)) {
 		/* set ssram size to 64 KB */
-		ip->emcr = EMCR_RAMPAR;
-		ioc3_w_emcr(ioc3_r_emcr() & ~EMCR_BUFSIZ);
-	} else
-		ip->emcr = EMCR_BUFSIZ | EMCR_RAMPAR;
+		ip->emcr |= EMCR_RAMPAR;
+		writel(readl(&regs->emcr) & ~EMCR_BUFSIZ, &regs->emcr);
+	} else {
+		ip->emcr |= EMCR_BUFSIZ | EMCR_RAMPAR;
+	}
 }
 
 static void ioc3_init(struct net_device *dev)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
-	struct ioc3 *ioc3 = ip->regs;
+	struct ioc3_ethregs *regs = ip->regs;
 
 	del_timer_sync(&ip->ioc3_timer);	/* Kill if running	*/
 
-	ioc3_w_emcr(EMCR_RST);			/* Reset		*/
-	(void) ioc3_r_emcr();			/* Flush WB		*/
+	writel(EMCR_RST, &regs->emcr);		/* Reset		*/
+	readl(&regs->emcr);			/* Flush WB		*/
 	udelay(4);				/* Give it time ...	*/
-	ioc3_w_emcr(0);
-	(void) ioc3_r_emcr();
+	writel(0, &regs->emcr);
+	readl(&regs->emcr);
 
 	/* Misc registers  */
-#ifdef CONFIG_SGI_IP27
-	ioc3_w_erbar(PCI64_ATTR_BAR >> 32);	/* Barrier on last store */
-#else
-	ioc3_w_erbar(0);			/* Let PCI API get it right */
-#endif
-	(void) ioc3_r_etcdc();			/* Clear on read */
-	ioc3_w_ercsr(15);			/* RX low watermark  */
-	ioc3_w_ertr(0);				/* Interrupt immediately */
+	writel(ERBAR_VAL, &regs->erbar);
+	readl(&regs->etcdc);			/* Clear on read */
+	writel(15, &regs->ercsr);		/* RX low watermark  */
+	writel(0, &regs->ertr);			/* Interrupt immediately */
 	__ioc3_set_mac_address(dev);
-	ioc3_w_ehar_h(ip->ehar_h);
-	ioc3_w_ehar_l(ip->ehar_l);
-	ioc3_w_ersr(42);			/* XXX should be random */
+	writel(ip->ehar_h, &regs->ehar_h);
+	writel(ip->ehar_l, &regs->ehar_l);
+	writel(42, &regs->ersr);		/* XXX should be random */
+}
 
-	ioc3_init_rings(dev);
+static void ioc3_start(struct ioc3_private *ip)
+{
+	struct ioc3_ethregs *regs = ip->regs;
+	unsigned long ring;
+
+	/* Now the rx ring base, consume & produce registers.  */
+	ring = ioc3_map(ip->rxr_dma, PCI64_ATTR_PREC);
+	writel(ring >> 32, &regs->erbr_h);
+	writel(ring & 0xffffffff, &regs->erbr_l);
+	writel(ip->rx_ci << 3, &regs->ercir);
+	writel((ip->rx_pi << 3) | ERPIR_ARM, &regs->erpir);
+
+	ring = ioc3_map(ip->txr_dma, PCI64_ATTR_PREC);
+
+	ip->txqlen = 0;					/* nothing queued  */
+
+	/* Now the tx ring base, consume & produce registers.  */
+	writel(ring >> 32, &regs->etbr_h);
+	writel(ring & 0xffffffff, &regs->etbr_l);
+	writel(ip->tx_pi << 7, &regs->etpir);
+	writel(ip->tx_ci << 7, &regs->etcir);
+	readl(&regs->etcir);				/* Flush */
 
 	ip->emcr |= ((RX_OFFSET / 2) << EMCR_RXOFF_SHIFT) | EMCR_TXDMAEN |
-	             EMCR_TXEN | EMCR_RXDMAEN | EMCR_RXEN | EMCR_PADEN;
-	ioc3_w_emcr(ip->emcr);
-	ioc3_w_eier(EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO |
-	            EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO |
-	            EISR_TXEXPLICIT | EISR_TXMEMERR);
-	(void) ioc3_r_eier();
+		    EMCR_TXEN | EMCR_RXDMAEN | EMCR_RXEN | EMCR_PADEN;
+	writel(ip->emcr, &regs->emcr);
+	writel(EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO |
+	       EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO |
+	       EISR_TXEXPLICIT | EISR_TXMEMERR, &regs->eier);
+	readl(&regs->eier);
 }
 
 static inline void ioc3_stop(struct ioc3_private *ip)
 {
-	struct ioc3 *ioc3 = ip->regs;
+	struct ioc3_ethregs *regs = ip->regs;
 
-	ioc3_w_emcr(0);				/* Shutup */
-	ioc3_w_eier(0);				/* Disable interrupts */
-	(void) ioc3_r_eier();			/* Flush */
+	writel(0, &regs->emcr);			/* Shutup */
+	writel(0, &regs->eier);			/* Disable interrupts */
+	readl(&regs->eier);			/* Flush */
 }
 
 static int ioc3_open(struct net_device *dev)
@@ -1038,14 +975,20 @@ static int ioc3_open(struct net_device *dev)
 	struct ioc3_private *ip = netdev_priv(dev);
 
 	if (request_irq(dev->irq, ioc3_interrupt, IRQF_SHARED, ioc3_str, dev)) {
-		printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq);
+		netdev_err(dev, "Can't get irq %d\n", dev->irq);
 
 		return -EAGAIN;
 	}
 
 	ip->ehar_h = 0;
 	ip->ehar_l = 0;
+
 	ioc3_init(dev);
+	if (ioc3_alloc_rx_bufs(dev)) {
+		netdev_err(dev, "%s: rx buffer allocation failed\n", __func__);
+		return -ENOMEM;
+	}
+	ioc3_start(ip);
 	ioc3_mii_start(ip);
 
 	netif_start_queue(dev);
@@ -1063,12 +1006,13 @@ static int ioc3_close(struct net_device *dev)
 	ioc3_stop(ip);
 	free_irq(dev->irq, dev);
 
-	ioc3_free_rings(ip);
+	ioc3_free_rx_bufs(ip);
+	ioc3_clean_tx_ring(ip);
+
 	return 0;
 }
 
-/*
- * MENET cards have four IOC3 chips, which are attached to two sets of
+/* MENET cards have four IOC3 chips, which are attached to two sets of
  * PCI slot resources each: the primary connections are on slots
  * 0..3 and the secondaries are on 4..7
  *
@@ -1085,7 +1029,7 @@ static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int slot)
 
 	if (dev) {
 		if (dev->vendor == PCI_VENDOR_ID_SGI &&
-			dev->device == PCI_DEVICE_ID_SGI_IOC3)
+		    dev->device == PCI_DEVICE_ID_SGI_IOC3)
 			ret = 1;
 		pci_dev_put(dev);
 	}
@@ -1095,15 +1039,14 @@ static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int slot)
 
 static int ioc3_is_menet(struct pci_dev *pdev)
 {
-	return pdev->bus->parent == NULL &&
+	return !pdev->bus->parent &&
 	       ioc3_adjacent_is_ioc3(pdev, 0) &&
 	       ioc3_adjacent_is_ioc3(pdev, 1) &&
 	       ioc3_adjacent_is_ioc3(pdev, 2);
 }
 
 #ifdef CONFIG_SERIAL_8250
-/*
- * Note about serial ports and consoles:
+/* Note about serial ports and consoles:
  * For console output, everyone uses the IOC3 UARTA (offset 0x178)
  * connected to the master node (look in ip27_setup_console() and
  * ip27prom_console_write()).
@@ -1140,31 +1083,32 @@ static void ioc3_8250_register(struct ioc3_uartregs __iomem *uart)
 #define COSMISC_CONSTANT 6
 
 	struct uart_8250_port port = {
-	        .port = {
+		.port = {
 			.irq		= 0,
 			.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
 			.iotype		= UPIO_MEM,
 			.regshift	= 0,
 			.uartclk	= (22000000 << 1) / COSMISC_CONSTANT,
 
-			.membase	= (unsigned char __iomem *) uart,
-			.mapbase	= (unsigned long) uart,
-                }
+			.membase	= (unsigned char __iomem *)uart,
+			.mapbase	= (unsigned long)uart,
+		}
 	};
 	unsigned char lcr;
 
-	lcr = uart->iu_lcr;
-	uart->iu_lcr = lcr | UART_LCR_DLAB;
-	uart->iu_scr = COSMISC_CONSTANT,
-	uart->iu_lcr = lcr;
-	uart->iu_lcr;
+	lcr = readb(&uart->iu_lcr);
+	writeb(lcr | UART_LCR_DLAB, &uart->iu_lcr);
+	writeb(COSMISC_CONSTANT, &uart->iu_scr);
+	writeb(lcr, &uart->iu_lcr);
+	readb(&uart->iu_lcr);
 	serial8250_register_8250_port(&port);
 }
 
 static void ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
 {
-	/*
-	 * We need to recognice and treat the fourth MENET serial as it
+	u32 sio_iec;
+
+	/* We need to recognice and treat the fourth MENET serial as it
 	 * does not have an SuperIO chip attached to it, therefore attempting
 	 * to access it will result in bus errors.  We call something an
 	 * MENET if PCI slot 0, 1, 2 and 3 of a master PCI bus all have an IOC3
@@ -1175,33 +1119,34 @@ static void ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
 	if (ioc3_is_menet(pdev) && PCI_SLOT(pdev->devfn) == 3)
 		return;
 
-	/*
-	 * Switch IOC3 to PIO mode.  It probably already was but let's be
+	/* Switch IOC3 to PIO mode.  It probably already was but let's be
 	 * paranoid
 	 */
-	ioc3->gpcr_s = GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL;
-	ioc3->gpcr_s;
-	ioc3->gppr_6 = 0;
-	ioc3->gppr_6;
-	ioc3->gppr_7 = 0;
-	ioc3->gppr_7;
-	ioc3->sscr_a = ioc3->sscr_a & ~SSCR_DMA_EN;
-	ioc3->sscr_a;
-	ioc3->sscr_b = ioc3->sscr_b & ~SSCR_DMA_EN;
-	ioc3->sscr_b;
+	writel(GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL, &ioc3->gpcr_s);
+	readl(&ioc3->gpcr_s);
+	writel(0, &ioc3->gppr[6]);
+	readl(&ioc3->gppr[6]);
+	writel(0, &ioc3->gppr[7]);
+	readl(&ioc3->gppr[7]);
+	writel(readl(&ioc3->port_a.sscr) & ~SSCR_DMA_EN, &ioc3->port_a.sscr);
+	readl(&ioc3->port_a.sscr);
+	writel(readl(&ioc3->port_b.sscr) & ~SSCR_DMA_EN, &ioc3->port_b.sscr);
+	readl(&ioc3->port_b.sscr);
 	/* Disable all SA/B interrupts except for SA/B_INT in SIO_IEC. */
-	ioc3->sio_iec &= ~ (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL |
-			    SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER |
-			    SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS |
-			    SIO_IR_SA_TX_EXPLICIT | SIO_IR_SA_MEMERR);
-	ioc3->sio_iec |= SIO_IR_SA_INT;
-	ioc3->sscr_a = 0;
-	ioc3->sio_iec &= ~ (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL |
-			    SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER |
-			    SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS |
-			    SIO_IR_SB_TX_EXPLICIT | SIO_IR_SB_MEMERR);
-	ioc3->sio_iec |= SIO_IR_SB_INT;
-	ioc3->sscr_b = 0;
+	sio_iec = readl(&ioc3->sio_iec);
+	sio_iec &= ~(SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL |
+		     SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER |
+		     SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS |
+		     SIO_IR_SA_TX_EXPLICIT | SIO_IR_SA_MEMERR);
+	sio_iec |= SIO_IR_SA_INT;
+	sio_iec &= ~(SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL |
+		     SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER |
+		     SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS |
+		     SIO_IR_SB_TX_EXPLICIT | SIO_IR_SB_MEMERR);
+	sio_iec |= SIO_IR_SB_INT;
+	writel(sio_iec, &ioc3->sio_iec);
+	writel(0, &ioc3->port_a.sscr);
+	writel(0, &ioc3->port_b.sscr);
 
 	ioc3_8250_register(&ioc3->sregs.uarta);
 	ioc3_8250_register(&ioc3->sregs.uartb);
@@ -1236,15 +1181,15 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		pci_using_dac = 1;
 		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
 		if (err < 0) {
-			printk(KERN_ERR "%s: Unable to obtain 64 bit DMA "
-			       "for consistent allocations\n", pci_name(pdev));
+			pr_err("%s: Unable to obtain 64 bit DMA for consistent allocations\n",
+			       pci_name(pdev));
 			goto out;
 		}
 	} else {
 		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
-			printk(KERN_ERR "%s: No usable DMA configuration, "
-			       "aborting.\n", pci_name(pdev));
+			pr_err("%s: No usable DMA configuration, aborting.\n",
+			       pci_name(pdev));
 			goto out;
 		}
 		pci_using_dac = 0;
@@ -1270,19 +1215,22 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ip = netdev_priv(dev);
 	ip->dev = dev;
+	ip->dma_dev = &pdev->dev;
 
 	dev->irq = pdev->irq;
 
 	ioc3_base = pci_resource_start(pdev, 0);
 	ioc3_size = pci_resource_len(pdev, 0);
-	ioc3 = (struct ioc3 *) ioremap(ioc3_base, ioc3_size);
+	ioc3 = (struct ioc3 *)ioremap(ioc3_base, ioc3_size);
 	if (!ioc3) {
-		printk(KERN_CRIT "ioc3eth(%s): ioremap failed, goodbye.\n",
+		pr_err("ioc3eth(%s): ioremap failed, goodbye.\n",
 		       pci_name(pdev));
 		err = -ENOMEM;
 		goto out_res;
 	}
-	ip->regs = ioc3;
+	ip->regs = &ioc3->eth;
+	ip->ssram = ioc3->ssram;
+	ip->all_regs = ioc3;
 
 #ifdef CONFIG_SERIAL_8250
 	ioc3_serial_probe(pdev, ioc3);
@@ -1292,6 +1240,26 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	timer_setup(&ip->ioc3_timer, ioc3_timer, 0);
 
 	ioc3_stop(ip);
+
+	/* Allocate rx ring.  4kb = 512 entries, must be 4kb aligned */
+	ip->rxr = dma_direct_alloc_pages(ip->dma_dev, RX_RING_SIZE,
+					 &ip->rxr_dma, GFP_ATOMIC, 0);
+	if (!ip->rxr) {
+		pr_err("ioc3-eth: rx ring allocation failed\n");
+		err = -ENOMEM;
+		goto out_stop;
+	}
+
+	/* Allocate tx rings.  16kb = 128 bufs, must be 16kb aligned  */
+	ip->txr = dma_direct_alloc_pages(ip->dma_dev, TX_RING_SIZE,
+					 &ip->txr_dma,
+					 GFP_KERNEL | __GFP_ZERO, 0);
+	if (!ip->txr) {
+		pr_err("ioc3-eth: tx ring allocation failed\n");
+		err = -ENOMEM;
+		goto out_stop;
+	}
+
 	ioc3_init(dev);
 
 	ip->pdev = pdev;
@@ -1305,7 +1273,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ioc3_mii_init(ip);
 
 	if (ip->mii.phy_id == -1) {
-		printk(KERN_CRIT "ioc3-eth(%s): Didn't find a PHY, goodbye.\n",
+		pr_err("ioc3-eth(%s): Didn't find a PHY, goodbye.\n",
 		       pci_name(pdev));
 		err = -ENODEV;
 		goto out_stop;
@@ -1335,24 +1303,27 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	vendor = (sw_physid1 << 12) | (sw_physid2 >> 4);
 	model  = (sw_physid2 >> 4) & 0x3f;
 	rev    = sw_physid2 & 0xf;
-	printk(KERN_INFO "%s: Using PHY %d, vendor 0x%x, model %d, "
-	       "rev %d.\n", dev->name, ip->mii.phy_id, vendor, model, rev);
-	printk(KERN_INFO "%s: IOC3 SSRAM has %d kbyte.\n", dev->name,
-	       ip->emcr & EMCR_BUFSIZ ? 128 : 64);
+	netdev_info(dev, "Using PHY %d, vendor 0x%x, model %d, rev %d.\n",
+		    ip->mii.phy_id, vendor, model, rev);
+	netdev_info(dev, "IOC3 SSRAM has %d kbyte.\n",
+		    ip->emcr & EMCR_BUFSIZ ? 128 : 64);
 
 	return 0;
 
 out_stop:
-	ioc3_stop(ip);
 	del_timer_sync(&ip->ioc3_timer);
-	ioc3_free_rings(ip);
+	if (ip->rxr)
+		dma_direct_free_pages(ip->dma_dev, RX_RING_SIZE, ip->rxr,
+				      ip->rxr_dma, 0);
+	if (ip->txr)
+		dma_direct_free_pages(ip->dma_dev, TX_RING_SIZE, ip->txr,
+				      ip->txr_dma, 0);
 out_res:
 	pci_release_regions(pdev);
 out_free:
 	free_netdev(dev);
 out_disable:
-	/*
-	 * We should call pci_disable_device(pdev); here if the IOC3 wasn't
+	/* We should call pci_disable_device(pdev); here if the IOC3 wasn't
 	 * such a weird device ...
 	 */
 out:
@@ -1363,16 +1334,19 @@ static void ioc3_remove_one(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct ioc3_private *ip = netdev_priv(dev);
-	struct ioc3 *ioc3 = ip->regs;
+
+	dma_direct_free_pages(ip->dma_dev, RX_RING_SIZE, ip->rxr,
+			      ip->rxr_dma, 0);
+	dma_direct_free_pages(ip->dma_dev, TX_RING_SIZE, ip->txr,
+			      ip->txr_dma, 0);
 
 	unregister_netdev(dev);
 	del_timer_sync(&ip->ioc3_timer);
 
-	iounmap(ioc3);
+	iounmap(ip->all_regs);
 	pci_release_regions(pdev);
 	free_netdev(dev);
-	/*
-	 * We should call pci_disable_device(pdev); here if the IOC3 wasn't
+	/* We should call pci_disable_device(pdev); here if the IOC3 wasn't
 	 * such a weird device ...
 	 */
 }
@@ -1392,16 +1366,14 @@ static struct pci_driver ioc3_driver = {
 
 static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	unsigned long data;
 	struct ioc3_private *ip = netdev_priv(dev);
-	struct ioc3 *ioc3 = ip->regs;
-	unsigned int len;
 	struct ioc3_etxd *desc;
-	uint32_t w0 = 0;
+	unsigned long data;
+	unsigned int len;
 	int produce;
+	u32 w0 = 0;
 
-	/*
-	 * IOC3 has a fairly simple minded checksumming hardware which simply
+	/* IOC3 has a fairly simple minded checksumming hardware which simply
 	 * adds up the 1's complement checksum for the entire packet and
 	 * inserts it at an offset which can be specified in the descriptor
 	 * into the transmit packet.  This means we have to compensate for the
@@ -1412,25 +1384,23 @@ static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		const struct iphdr *ih = ip_hdr(skb);
 		const int proto = ntohs(ih->protocol);
 		unsigned int csoff;
-		uint32_t csum, ehsum;
-		uint16_t *eh;
+		u32 csum, ehsum;
+		u16 *eh;
 
 		/* The MAC header.  skb->mac seem the logic approach
-		   to find the MAC header - except it's a NULL pointer ...  */
-		eh = (uint16_t *) skb->data;
+		 * to find the MAC header - except it's a NULL pointer ...
+		 */
+		eh = (u16 *)skb->data;
 
 		/* Sum up dest addr, src addr and protocol  */
 		ehsum = eh[0] + eh[1] + eh[2] + eh[3] + eh[4] + eh[5] + eh[6];
 
-		/* Fold ehsum.  can't use csum_fold which negates also ...  */
-		ehsum = (ehsum & 0xffff) + (ehsum >> 16);
-		ehsum = (ehsum & 0xffff) + (ehsum >> 16);
-
 		/* Skip IP header; it's sum is always zero and was
-		   already filled in by ip_output.c */
+		 * already filled in by ip_output.c
+		 */
 		csum = csum_tcpudp_nofold(ih->saddr, ih->daddr,
-		                          ih->tot_len - (ih->ihl << 2),
-		                          proto, 0xffff ^ ehsum);
+					  ih->tot_len - (ih->ihl << 2),
+					  proto, csum_fold(ehsum));
 
 		csum = (csum & 0xffff) + (csum >> 16);	/* Fold again */
 		csum = (csum & 0xffff) + (csum >> 16);
@@ -1450,7 +1420,7 @@ static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	spin_lock_irq(&ip->ioc3_lock);
 
-	data = (unsigned long) skb->data;
+	data = (unsigned long)skb->data;
 	len = skb->len;
 
 	produce = ip->tx_pi;
@@ -1470,47 +1440,78 @@ static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		unsigned long b2 = (data | 0x3fffUL) + 1UL;
 		unsigned long s1 = b2 - data;
 		unsigned long s2 = data + len - b2;
+		dma_addr_t d1, d2;
 
 		desc->cmd    = cpu_to_be32(len | ETXD_INTWHENDONE |
-		                           ETXD_B1V | ETXD_B2V | w0);
+					   ETXD_B1V | ETXD_B2V | w0);
 		desc->bufcnt = cpu_to_be32((s1 << ETXD_B1CNT_SHIFT) |
-		                           (s2 << ETXD_B2CNT_SHIFT));
-		desc->p1     = cpu_to_be64(ioc3_map(skb->data, 1));
-		desc->p2     = cpu_to_be64(ioc3_map((void *) b2, 1));
+					   (s2 << ETXD_B2CNT_SHIFT));
+		d1 = dma_map_single(ip->dma_dev, skb->data, s1, DMA_TO_DEVICE);
+		if (dma_mapping_error(ip->dma_dev, d1))
+			goto drop_packet;
+		d2 = dma_map_single(ip->dma_dev, (void *)b2, s1, DMA_TO_DEVICE);
+		if (dma_mapping_error(ip->dma_dev, d2)) {
+			dma_unmap_single(ip->dma_dev, d1, len, DMA_TO_DEVICE);
+			goto drop_packet;
+		}
+		desc->p1     = cpu_to_be64(ioc3_map(d1, PCI64_ATTR_PREF));
+		desc->p2     = cpu_to_be64(ioc3_map(d2, PCI64_ATTR_PREF));
 	} else {
+		dma_addr_t d;
+
 		/* Normal sized packet that doesn't cross a page boundary. */
 		desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_B1V | w0);
 		desc->bufcnt = cpu_to_be32(len << ETXD_B1CNT_SHIFT);
-		desc->p1     = cpu_to_be64(ioc3_map(skb->data, 1));
+		d = dma_map_single(ip->dma_dev, skb->data, len, DMA_TO_DEVICE);
+		if (dma_mapping_error(ip->dma_dev, d))
+			goto drop_packet;
+		desc->p1     = cpu_to_be64(ioc3_map(d, PCI64_ATTR_PREF));
 	}
 
-	BARRIER();
+	mb(); /* make sure all descriptor changes are visible */
 
 	ip->tx_skbs[produce] = skb;			/* Remember skb */
-	produce = (produce + 1) & 127;
+	produce = (produce + 1) & TX_RING_MASK;
 	ip->tx_pi = produce;
-	ioc3_w_etpir(produce << 7);			/* Fire ... */
+	writel(produce << 7, &ip->regs->etpir);		/* Fire ... */
 
 	ip->txqlen++;
 
-	if (ip->txqlen >= 127)
+	if (ip->txqlen >= (TX_RING_ENTRIES - 1))
 		netif_stop_queue(dev);
 
 	spin_unlock_irq(&ip->ioc3_lock);
 
 	return NETDEV_TX_OK;
+
+drop_packet:
+	dev_kfree_skb_any(skb);
+	dev->stats.tx_dropped++;
+
+	spin_unlock_irq(&ip->ioc3_lock);
+
+	return NETDEV_TX_OK;
 }
 
 static void ioc3_timeout(struct net_device *dev)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
 
-	printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
+	netdev_err(dev, "transmit timed out, resetting\n");
 
 	spin_lock_irq(&ip->ioc3_lock);
 
 	ioc3_stop(ip);
+	ioc3_free_rx_bufs(ip);
+	ioc3_clean_tx_ring(ip);
+
 	ioc3_init(dev);
+	if (ioc3_alloc_rx_bufs(dev)) {
+		netdev_err(dev, "%s: rx buffer allocation failed\n", __func__);
+		spin_unlock_irq(&ip->ioc3_lock);
+		return;
+	}
+	ioc3_start(ip);
 	ioc3_mii_init(ip);
 	ioc3_mii_start(ip);
 
@@ -1519,16 +1520,14 @@ static void ioc3_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-/*
- * Given a multicast ethernet address, this routine calculates the
+/* Given a multicast ethernet address, this routine calculates the
  * address's bit index in the logical address filter mask
  */
-
 static inline unsigned int ioc3_hash(const unsigned char *addr)
 {
 	unsigned int temp = 0;
-	u32 crc;
 	int bits;
+	u32 crc;
 
 	crc = ether_crc_le(ETH_ALEN, addr);
 
@@ -1542,8 +1541,8 @@ static inline unsigned int ioc3_hash(const unsigned char *addr)
 	return temp;
 }
 
-static void ioc3_get_drvinfo (struct net_device *dev,
-	struct ethtool_drvinfo *info)
+static void ioc3_get_drvinfo(struct net_device *dev,
+			     struct ethtool_drvinfo *info)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
 
@@ -1623,27 +1622,28 @@ static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 static void ioc3_set_multicast_list(struct net_device *dev)
 {
-	struct netdev_hw_addr *ha;
 	struct ioc3_private *ip = netdev_priv(dev);
-	struct ioc3 *ioc3 = ip->regs;
+	struct ioc3_ethregs *regs = ip->regs;
+	struct netdev_hw_addr *ha;
 	u64 ehar = 0;
 
-	netif_stop_queue(dev);				/* Lock out others. */
+	spin_lock_irq(&ip->ioc3_lock);
 
 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous.  */
 		ip->emcr |= EMCR_PROMISC;
-		ioc3_w_emcr(ip->emcr);
-		(void) ioc3_r_emcr();
+		writel(ip->emcr, &regs->emcr);
+		readl(&regs->emcr);
 	} else {
 		ip->emcr &= ~EMCR_PROMISC;
-		ioc3_w_emcr(ip->emcr);			/* Clear promiscuous. */
-		(void) ioc3_r_emcr();
+		writel(ip->emcr, &regs->emcr);		/* Clear promiscuous. */
+		readl(&regs->emcr);
 
 		if ((dev->flags & IFF_ALLMULTI) ||
 		    (netdev_mc_count(dev) > 64)) {
 			/* Too many for hashing to make sense or we want all
-			   multicast packets anyway,  so skip computing all the
-			   hashes and just accept all packets.  */
+			 * multicast packets anyway,  so skip computing all the
+			 * hashes and just accept all packets.
+			 */
 			ip->ehar_h = 0xffffffff;
 			ip->ehar_l = 0xffffffff;
 		} else {
@@ -1653,11 +1653,11 @@ static void ioc3_set_multicast_list(struct net_device *dev)
 			ip->ehar_h = ehar >> 32;
 			ip->ehar_l = ehar & 0xffffffff;
 		}
-		ioc3_w_ehar_h(ip->ehar_h);
-		ioc3_w_ehar_l(ip->ehar_l);
+		writel(ip->ehar_h, &regs->ehar_h);
+		writel(ip->ehar_l, &regs->ehar_l);
 	}
 
-	netif_wake_queue(dev);			/* Let us get going again. */
+	spin_unlock_irq(&ip->ioc3_lock);
 }
 
 module_pci_driver(ioc3_driver);